Vestil Frequently Asked Questions

Vestil Support Center

Find answers by Model, Keyword, Question, or Answer.

Search the FAQ database below, then open any question to view the answer. Product model numbers appear as quick badges under each matching question.

Tip: try a model like PEL-88 or a keyword like battery.

1171 matching FAQs

Are all the bearings sealed or open on the PST ? PST

Answer

The bearings are open.

View Related Product: PST FID: 203

Are any of Vestil's Drum Truck with Scales intrinsically safe? DRUM-55-SCL

Answer

No.

View Related Product: DRUM-55-SCL FID: 790

Are series FJB basement floor jacks for temporary or permanent use?

Answer

FJB basement floor jacks are for temporary usage only.

View Related Product FID: 1062

Are the 5-1/2" diameter bollards hollow? And if so, what is inside diameter?? BOL-48-5.5

Answer

Yes, all of the Steel Pipe Safety Bollards are hollow. The inside diameter of the 5-1/2" bollards is 5-1/4".

View Related Product: BOL-48-5.5 FID: 658

Are the bags recyclable? BAG-4836BAG-4884

Answer

These are made with a polypropylene outer and a polyethylene inner. Both are recyclable.

View Related Product: BAG-4836 FID: 76

Are the car stops hollow or solid recycled plastic? CS-33-GCS-33-YCS-33-BCS-33-WCS-S24-GCS-S24-YCS-S24-BCS-S24-W+12 more

Answer

The car stops are solid.

View Related Product: CS-33-G FID: 111

Are the casters on the dolly grounded static? DRUM-SS-55-H

Answer

No, they are not grounded or anti-static.

View Related Product: DRUM-SS-55-H FID: 839

Are the chains long enough to lift vertically? CDL-2000

Answer

The chains are 28-1/2" long, so whether that length is long enough is dependent on what overhead lifting device you are using.

View Related Product: CDL-2000 FID: 828

Are the DCCs hard to push around with a full load? How much force do I need to move them at capacity? DCC-80DCC-2860-4DCC-2896-4DCC-2860-10DCC-2896-10DCC-28120-10

Answer

START PUSHING 4,000 LBS UNITS: LOAD: 30-40 LBS. pressure
START PUSHING 10,000 LBS. LOAD: 75-100 LBS. pressure

View Related Product: DCC-80 FID: 1051

Are the EHLT scissor lift tables powder coated? EHLT-2448-3-43-QSEHLT-3060-3-43-QSELT-4048-3-43-QSEHLT-4848-3-43-QSEHLT-4872-3-43-QSEHLT-3060-4-43-QSEHLT-4048-4-43-QSEHLT-4848-4-43-QS+1 more

Answer

The Quick Ship (QS) tables have a powder coated deck. Some small bolt-on brackets are powder coated as well. The majority of the table is liquid painted.

View Related Product: EHLT-2448-3-43-QS FID: 196

Are the EOP-440 and the EOP-550 CSA approved? EOP-440EOP-550

Answer

No the EOP-440 and the EOP-550 are not CSA approved.

View Related Product: EOP-440 FID: 355

Are the fork extensions sold in a pair? Fork Extensions

Answer

Standard, the fork extensions are sold in pairs. We do offer individual fork extensions with -EACH as the suffix.

View Related Product: Fork Extensions FID: 911

Are the fork extensions sold in a pair? Fork Extensions

Answer

Standard, the fork extensions are sold in pairs. We do offer individual fork extensions with -EACH as the suffix.

View Related Product: Fork Extensions FID: 486

Are the fork extensions sold in a pair? Fork Extensions

Answer

Standard, the fork extensions are sold in pairs. We do offer individual fork extensions with -EACH as the suffix.

View Related Product: Fork Extensions FID: 1397

Are the forks adjustable on the HYD-10-DC? HYD-10-DC

Answer

Yes, when the forks are extended, overall fork width is 21-5/8", and when forks are retracted the overall fork width is 9".

View Related Product: HYD-10-DC FID: 262

Are the forks on VHPS-2000-AA adjustable to work with different size pallets? VHPS-2000-AA

Answer

Yes, the VHPS-2000-AA has adjustable forks that can be adjusted within the range of 8-1/2" wide to 26" wide.

View Related Product: VHPS-2000-AA FID: 246

Are the forks removable on the S-CB-118? S-CB-118

Answer

Yes! The forks on the S-CB-118 are removable.

View Related Product: S-CB-118 FID: 254

Are the forks removable? RT-S-62-AF

Answer

Yes, the forks on the RT-S-62-AF are removable.

View Related Product: RT-S-62-AF FID: 1509

Are the HCR series ADA compliant? HCR

Answer

No, they are not ADA compliant.

View Related Product: HCR FID: 56

Are the internal gaskets for LDP-SS-316 Teflon or silicone? LDP-SS-316

Answer

The internal gaskets are Teflon.

View Related Product: LDP-SS-316 FID: 870

Are the keys interchangeable with the bollards? PARK-P-108-FDPARK-P-108FD-SSPARK-P-60-FDPARK-P-76-FD

Answer

Yes, the keys are interchangeable.

View Related Product: PARK-P-108-FD FID: 677

Are the mounting tabs welded or screwed on the panel APG-M-35? APG-M-35

Answer

The mounting tabs are welded on.

View Related Product: APG-M-35 FID: 753

Are the paint cans lined? MRC-16

Answer

The MRC-16 paint can is not lined.

View Related Product: MRC-16 FID: 920

Are the pallets PBDE free? PLP2-4840

Answer

Yes, these plastic pallets are PBDE free. The pallets are 100% virgin HDPE material.

View Related Product: PLP2-4840 FID: 444

Are the quilts washable? QPC-7280-DP-1PKQPC-7280-DP-4PKQPC-7280-DP-12PKQPC-7280-UP-1PKQPC-7280-UP-4PKQPC-7280-UP-12PKQPC-7280-VP-1PKQPC-7280-VP-4PK+1 more

Answer

Yes, they are washable.

View Related Product: QPC-7280-DP-1PK FID: 78

Are the railings removable on series EMHC? EMHC

Answer

Yes, they are bolted on. The rails fit in a socket and then there are nuts on the other side. Railing ends are threaded.

View Related Product: EMHC FID: 1022

Are the rims on the hand truck steel? DHHT

Answer

The rims on the DHHT series are steel for those with pneumatic wheels and plastic for hard rubber wheels.

View Related Product: DHHT FID: 993

Are the rubber wheel chocks solid rubber or hollow? RWC-2-PRRWC-3RWC-5RWC-8RWC-8/OH-15-HDRWC-8-HDLRWC-9-URWC-8-SBS+3 more

Answer

The rubber wheel chocks are not solid.

View Related Product: RWC-2-PR FID: 79

Are the SBRY-CAPs sold individually? SBRY-CAP-ASBRY-CAP-C

Answer

The SBRY-CAPs are sold in pair.

View Related Product: SBRY-CAP-A FID: 108

Are the scissor lift tables power up/gravity down? EHLT

Answer

Yes, they are.

View Related Product: EHLT FID: 196

Are the shelves on the carts bolted or welded on? SPA-HD-2252SPA-HD-2252-5PUSPA-HD-2252-6MRSPA-HD-2852SPS-HD-2252SPS-HD-2252-5PUSPS-HD-2252-6MRSPS-HF-2252+3 more

Answer

The shelves are welded on.

View Related Product: SPA-HD-2252 FID: 925

Are the shelves removable and adjustable on the ROL-3143-2? ROL-3143-2

Answer

The bottom shelf on the ROL-3143-2 is fixed. Additional shelves can be purchased and mounted anywhere there are cross braces on the sides of the units. The additional shelf is ROL-3143-SLF.

View Related Product: ROL-3143-2 FID: 989

Are there any other power options for FES-KIT? FES-KIT

Answer

The cord included with the FES-KIT is only suitable for operation on 115V. We have no other cords available for model FES-KIT.

View Related Product: FES-KIT FID: 532

Are there fork options for the stacker? RT-S-62-AF

Answer

We offer three options. RT- EPT-DBH double ball hitch, RT-EPT-MLH manual lock hitch, and the RT-EPT-SDG single drum gripper.

View Related Product: RT-S-62-AF FID: 1509

Are there leveling feet on the scale? SWA-48-SCALE

Answer

The scale does have adjustable leveling feet.

View Related Product: SWA-48-SCALE FID: 369

Are there mounting holes for the guard rail on one side? YGR-TP18YGR-TP42YGR-TP-TP60YGR-TP72

Answer

There are mounting holes on all four sides of all the Rigid Post models.

View Related Product: YGR-TP18 FID: 655

Are there other colors available for the accordion skirt? ACC

Answer

Customer colors include: Black, red, forest green, blue, champion blue, light green, navy blue, orange, tan, yellow, gray, white and silver silicone-coated fiberglass. Please contact a sales associate for details.

View Related Product: ACC FID: 1410

Are these bollards with strobe and beeper suitable for outdoor applications? SPBOL-42-BL

Answer

We do not recommend using these bollards outdoors.

View Related Product: SPBOL-42-BL FID: 675

Are these car stops flexible? Could they be mounted on a slightly curved surface. CS-33-BLCS-33-BL-3CS-33-BL-4

Answer

The rubber car stops are "slightly" flexible, especially if they are in the sun.

View Related Product: CS-33-BL FID: 111

Are these carts ESD safe? CART-750-TSCART-1500-D-TS

Answer

No, the carts are not ESD (electrostatic discharge) safe.

View Related Product: CART-750-TS FID: 294

Are these food safe? BSG-10G

Answer

No, they are not food safe.

View Related Product: BSG-10G FID: 434

Are these pallets made with recycled plastic? PLP2-4840-BLUEPLP2-4840-BLACK

Answer

The PLP2-4840-BLUE and the PLP2-4840-BLACK are both made from virgin material.

View Related Product: PLP2-4840-BLUE FID: 444

Are these totes nestable for storage? TDT

Answer

Once the tote (TDT) is assembled, they are not nestable.

View Related Product: TDT FID: 156

Are these units DOT certified? VTB-5-OVTB-5-WVTB-5-YVTB-6-OVTB-6-WVTB-6-Y

Answer

No, they do not comply with DOT standards.

View Related Product: VTB-5-O FID: 707

Are these wheel chocks solid or hollow? URWC-8

Answer

The urethane wheel chocks are hollow inside.

View Related Product: URWC-8 FID: 81

Are they reusable? BSG-10G

Answer

Yes, they are reusable. They have a usable life of approximately four to twelve months.

View Related Product: BSG-10G FID: 434

Are your plastic pallets FM approved/certified?

Answer

No, we do not have FM Approved Certificates for our plastic pallets.

View Related Product FID: 443

Are your plastic pallets FM approved/certified?

Answer

No, we do not have FM Approved Certificates for our plastic pallets.

View Related Product FID: 444

At what point does the frame raise? A-LIFT-R-HP

Answer

The frame of the A-LIFT-R-HP telescopes up when it hits 68".

View Related Product: A-LIFT-R-HP FID: 270

At what point when the forks are raised does the overall height begin to increase? S-101-AA-DM

Answer

When the forks are raised 1" the overall mast will increase by 1/2". Overall height is proportional with the fork height.

View Related Product: S-101-AA-DM FID: 253

Can a DJG gate be mounted outside? DJG-100DJG-100-10DJG-100MW

Answer

No part of the DJG is designed for installation in an outdoor environment.

View Related Product: DJG-100 FID: 9

Can a ladder be added to an existing lift truck? A-LIFT-EHP-LADA-LIFT-LAD

Answer

Yes, a ladder can be added to an existing lift truck in the field. Choose appropriate model number that corresponds with for your lift truck, or contact sales with your lift truck serial number.

View Related Product: A-LIFT-EHP-LAD FID: 270

Can an accordion skirt be added to these tables? EHE-2EHU-2EHE-3EHU-3EHU-12-SS

Answer

No, accordion skirts are not available for these tables.

View Related Product: EHE-2 FID: 207

Can BKT-SS-325 be used with asphalt? BKT-SS-325

Answer

Yes, BKT-SS-325 can be used with asphalt- but you have to be cautious and you'll need to put your own special warning labels on the bucket if you're planning to use it for asphalt.

View Related Product: BKT-SS-325 FID: 913

Can BOL-CI-38-8 be used as a decorative cover over a 4-1/2" pipe bollard? BOL-CI-38-8

Answer

The inner diameter is 4-1/2", so the largest pipe bollard diameter we suggest is 4".

View Related Product: BOL-CI-38-8 FID: 687

Can casters be added to the D-TILT hopper option? D-TILT

Answer

Yes, any hopper caster kits can be mounted to either the D-TILT frame or the option itself.

View Related Product: D-TILT FID: 449

Can casters be added to the NB hoppers? D-75-MD-NB

Answer

Yes, any D-style caster kit can be used with the D style hoppers with No Dump & Bump.

View Related Product: D-75-MD-NB FID: 1702

Can casters be added to these hoppers? HDROP

Answer

Yes! Caster kits containing (4) casters are available for these hoppers. You will find them under the options tab for the low profile H-style hoppers.

View Related Product: HDROP FID: 458

Can I add a shelf to this racking? VRSOR

Answer

Yes, the (VRSOR-SLF) shelf can be added to the VRSOR-120 or the VRSOR-60.

View Related Product: VRSOR FID: 1097

Can I install casters on this pallet? SPL-3636

Answer

No, casters cannot be installed on these pallets.

View Related Product: SPL-3636 FID: 436

Can I replace the casters with different wheels with brake? HDOS-2436-9

Answer

Yes, you can. The Casters are bolted on with flat head bolts and can be reused to change out casters with the same bolt spacing.

View Related Product: HDOS-2436-9 FID: 1034

Can I upgrade to AGM batteries? EPFC-CB-15EPC-25EPC-25-AA

Answer

Yes! Please ask for part AGM-UPG-2-12V when placing your order for a new electric powered floor crane.

View Related Product: EPFC-CB-15 FID: 586

Can I use the DGD-55-D on just one drum? DGD-55-D

Answer

Yes, this product will still work with one drum, or with two drums.

View Related Product: DGD-55-D FID: 781

Can I use the PRDC-42 on my 48" wide pallet rack? PRDC-42

Answer

No, it will not work on a 48" wide rack. You will have to switch out your current pallet racking for the 42" wide pallet racks.

View Related Product: PRDC-42 FID: 761

Can I use this as a doorstop for a very heavy door? RBW-2

Answer

Yes, these could be used as a doorstop for a heavy door. The rubber construction will limit any scratching of the door, and as the weight is increased, the wedges grip also increases.

View Related Product: RBW-2 FID: 88

Can RDC-1000-5PO be used with plastic drums? RDC-1000-5PO

Answer

The RDC-1000-5PO is for steel drums only.

View Related Product: RDC-1000-5PO FID: 803

Can SCRAPE-1 be used with an electric or manual pallet jack? SCRAPE-1

Answer

No, we recommend only using this model on a fork truck.

View Related Product: SCRAPE-1 FID: 469

Can SHEET-R-57 be stacked 2 high? SHEET-R-57

Answer

Yes, it can be stacked 2 high.

View Related Product: SHEET-R-57 FID: 1103

Can the air curtain be installed outside ? ACURT-36ACURT-48ACURT-60ACURT-72ACURT-96ACURT-108ACURT-120

Answer

The air curtain is designed for indoor use only.

View Related Product: ACURT-36 FID: 129

Can the ALEXGATE be locked? ALEXGATE

Answer

The gate cannot be locked, however there is a optional wall mount bracket.

View Related Product: ALEXGATE FID: 748

Can the BTC-PJ be used with a pallet truck? BTC-PJ

Answer

The BTC-PJ can be use with both a fork truck and a pallet truck.

View Related Product: BTC-PJ FID: 284

Can the DCBB-B-KIT work with the pour in place bollards (BOLPP series)? DCBB-B-KIT

Answer

Yes, the chain kit for the bollards can be used with BOLPP products.

View Related Product: DCBB-B-KIT FID: 12

Can the DCBB-B-KIT work with the pour in place bollards (BOLPP series)? BOLPP-24-4.5BOLPP-36-4.5BOLPP-42-4.5BOLPP-48-4.5BOLPP-62-4.5BOLPP-72-4.5BOLPP-24-5.5BOLPP-36-5.5+10 more

Answer

Yes, the chain kit for the bollards can be used with BOLPP products.

View Related Product: BOLPP-24-4.5 FID: 671

Can the drum carrier/rotator be used with plastic drums? DCR-205-8DCR-205-15DCR-205-20DCR-205-8-DCDCR-205-12-DC

Answer

Yes. Adapters are available for the DCR-205 products that work with most plastic and fiber drums. Please see the options tab on the drum carrier/rotator page and select the drum adapter link.

View Related Product: DCR-205-8 FID: 770

Can the Electric Hydraulic Box Dumpers be installed/used outdoors? HBD-2-36HBD-2-48HBD-2-60HBD-4-36HBD-4-48HBD-4-60HBD-6-36HBD-6-48+1 more

Answer

The Electric Hydraulic Box Dumpers are intended to be installed in an indoor environment. It is not recommended to be installed outdoors with constant exposure to sun and weather elements.

View Related Product: HBD-2-36 FID: 226

Can the F-GRID be suspended on 2 x 8's in place of decking for drainage on a deck? F-GRID

Answer

No, the F-GRID needs to be fully supported underneath to maintain the capacity and they structural integrity of the product.

View Related Product: F-GRID FID: 353

Can the FDA-550-DRUM-LRT-PF be installed in the field? DRUM-LRTDRUM-LRT-IIDRUM-LRT-DCDRUM-LRT-DC-IIDRUM-LRT-AIRDRUM-LRT-DC-SCLFDA-550-DRUM-LRT-PF

Answer

Yes. FDA-550-DRUM-LRT-PF can be installed in the factory or the field. The adaptor can be easily removed for use with steel drums.

View Related Product: DRUM-LRT FID: 783

Can the FMDDL-3000 be used to lift a single 3,000 lb drum? Or does the 3,000 lb capacity rating assume two drums at max 1,500 lb each? FMDDL-3000

Answer

The rating is for two drums at max 1,500 lb each.

View Related Product: FMDDL-3000 FID: 775

Can the forks on SL-137-AA be adjusted to move odd size pallets? SL-137-AA

Answer

The SL-137-AA has adjustable forks that can be adjusted from 8" wide to 26-3/4" wide.

View Related Product: SL-137-AA FID: 250

Can the grid be cut to a different size? F-GRID

Answer

No. The F-Grid is not made to be cut.

View Related Product: F-GRID FID: 353

Can the handle be removed on the VWS-770-AA and use a drill to operate the lift? VWS-770-AA

Answer

At this time the standard unit cannot be actuated using a power drill.

View Related Product: VWS-770-AA FID: 246

Can the hoppers be used with a telehandler? D-25-LDD-33-LDD-50-LDD-75-LDD-100-LDD-150-LDD-200-LDD-250-LD+21 more

Answer

We do NOT recommend using the hopper with a telehandler. These hoppers are designed for use with powered fork lift trucks.

View Related Product: D-25-LD FID: 449

Can the JIB be used outside? VAN-JVAN-J-DC

Answer

The VAN-J and the VAN-J-DC are powder-coat carbon steel, however the winch is not waterproof and cannot be used outside.

View Related Product: VAN-J FID: 583

Can the LAD-FM series be converted in the field to a powered LAD-FM-PSO? LAD-FM-60-PSOLAD-FM-72-PSOLAD-FM-84-PSOLAD-FM-96-PSOLAD-FM-108-PSOLAD-FM-120-PSO

Answer

No, you cannot purchase or retrofit the LAD-FM series to be powered.

View Related Product: LAD-FM-60-PSO FID: 611

Can the ladder be installed on a counter balance lift? A-LIFT-LAD

Answer

No, the ladder cannot be installed on the A-LIFT-CB.

View Related Product: A-LIFT-LAD FID: 270

Can the lift trucks be pushed while in the raised height? HIPM-2048-DCHIPM-2048-ACHIPM-2048-AIRHIPM-2748-DCHIPM-2748-ACHIPM-2748-AIRHIPM-2772-DCHIPM-2772-AC+1 more

Answer

No, they cannot.

View Related Product: HIPM-2048-DC FID: 236

Can the lift trucks be pushed while in the raised height? ULM-HTL-2149-20

Answer

No, they cannot.

View Related Product: ULM-HTL-2149-20 FID: 240

Can the lift trucks be pushed while in the raised height? L-220-HDL-270-HDL270-HD-SSL-270-DC-HDL-270-DC-HDL-270-DC-HD-SS

Answer

No, they cannot.

View Related Product: L-220-HD FID: 238

Can the light be set to continuous light? SPBOL-42-BLSPBOL-BL

Answer

The light is strobe only.

View Related Product: SPBOL-42-BL FID: 675

Can the material be trimmed to height for model BPC-48-5.5? BPC-48-5.5

Answer

We can cut bollard covers down to any height for an additional cost.

View Related Product: BPC-48-5.5 FID: 662

Can the PAIL-STL-RI handle temperatures up to 300°F? PAIL-STL-RI

Answer

The internal lining of PAIL-STL-RI is cured at 250°. The internal rust inhibitor will deteriorate at high temps, but the integrity of the pail should not be affected.

View Related Product: PAIL-STL-RI FID: 915

Can the pop-up ball transfer be mounted on a table or cart? POPUP-1932POPUP-4048

Answer

Yes. The pop-up ball transfer can be mounted here in the factory to a table or cart. For example the POPUP-1932 can be mounted to the CART-750-TS. Please contact a sales associate for information and details.

View Related Product: POPUP-1932 FID: 304

Can the portable pallet inverter pick up a loaded pallet? PI-P-4400-3254PI-P-SL-3000-3254PI-P-SL-3000-3276PI-P-SL-3000-4088

Answer

The portable pallet inverter (part number PI-P-4400-3254) can be used to pick up skids. Please see the straddle model options to pick up pallets or skids. (PI-P-SL-3000-3254, PI-P-SL-3000-3276, or PI-P-SL-3000-4088).

View Related Product: PI-P-4400-3254 FID: 224

Can the projectors handle vibration from being attached to a crane? VSP-12-001VSP-24-001

Answer

The projector is good to be used on cranes, we have supplied to many crane applications.
It is rugged for the crane vibration.

View Related Product: VSP-12-001 FID: 1508

Can the RT-MS-62-AF be used on any kind of (minor) incline? RT-MS-62-AF

Answer

No, RT-MS-62-AF would be very hard to pull on an incline and it would be hard to hold in place on an incline.

View Related Product: RT-MS-62-AF FID: 1509

Can the size of the self dumping hopper be modified? D-25-LDD-33-LDD-50-LDD-75-LDD-100-LDD-150-LDD-200-LDD-250-LD+21 more

Answer

We may be able to modify the width of the hopper. We are not able to modify the length. Please contact a sales associate for details.

View Related Product: D-25-LD FID: 449

Can the speeds of operation be adjusted? DRLT-CB-PDPLDRLT-CB-54-MDPL

Answer

The raise/lower speed is fixed. The drive speed forward/reverse can be adjusted.

View Related Product: DRLT-CB-PDPL FID: 1630

Can the TAL products be pushed while in the up position? TAL-220-DCTAL-220-HDTAL-260-DCTAL-260-HD

Answer

Yes, they can be pushed when in the raised height position.

View Related Product: TAL-220-DC FID: 241

Can the toe board and top bar on the top platform of the ladder be removed? LAD-6-14-G-EZ

Answer

The bar and toe guard at the top of the platform are both bolted on.

View Related Product: LAD-6-14-G-EZ FID: 602

Can the toe board and top bar on the top platform of the ladder be removed? LAD-16-21-P-EZ

Answer

The bar and toe guard at the top of the platform are both bolted on.

View Related Product: LAD-16-21-P-EZ FID: 1339

Can the tugger be used on an incline? E-TUG-10E-TUG-20E-TUG-30

Answer

The E-TUG-10, E-TUG-20, and E-TUG-30 will operate efficiently on a slope of 2-3 °.

View Related Product: E-TUG-10 FID: 1019

Can the uprights be attached to the I-Beam in multiple locations to adjust the usable width? AHS-2-10-12AHS-2-1514AHS-2-20-16AHS-4-10-14AHS-4-10-16AHS-4-15-12AHS-4-15-16+10 more

Answer

The vertical upright can be positioned inward on the I-Beam for a shorter usable width.

View Related Product: AHS-2-10-12 FID: 517

Can the V-Block be used on the HYD-10? HYD-3HYD-5HYD-10HYD-15HYD-5-EPHYD-10-EPHYD-5-ASHYD-10-AS+3 more

Answer

The HYDC-VBLK accessory for the DC powered unit can be used on the manual units as well.

View Related Product: HYD-3 FID: 261

Can the VHPS-DK option be used on VHPS-NM-1000-FF? VHPS-DK and VHPS-NM-1000-FF

Answer

No, the VHPS-DK option cannot be used on VHPS-NM-1000-FF.

View Related Product: VHPS-DK and VHPS-NM-1000-FF FID: 246

Can the WL series be used outside? WL-100

Answer

Yes, the WL-100 lifts can be used outside.

View Related Product: WL-100 FID: 1

Can the wrap height be set on the Powered Mast Options so when the stretch wrap reaches a specified height, it either stops or reverts back down? SWA-5070LP-PMOSWA-5070LP-PMO-RF

Answer

No, the wrap height be set on the Powered Mast Options. The Powered Mast Options height is controlled by an up/down hand control.

View Related Product: SWA-5070LP-PMO FID: 367

Can the wrap height be set on the Powered Mast Options so when the stretch wrap reaches a specified height, it either stops or reverts back down? SWA-5460-PMOSWA-5460-PMO-RF

Answer

No, the wrap height be set on the Powered Mast Options. The Powered Mast Options height is controlled by an up/down hand control.

View Related Product: SWA-5460-PMO FID: 368

Can these be installed on asphalt as well as concrete? CBOL-42-4

Answer

If it is inside, yes it can be installed on asphalt. While it can be installed outside on asphalt, we do not recommend this, as the bollard is chrome plated and will eventually rust. If looking for a bollard that works well for long term outside usage, we recommend BOL-SS.

View Related Product: CBOL-42-4 FID: 684

Can these be used outside? BOL-RF-42-4.5

Answer

This steel pipe safety bollard can be used both indoors and outdoors.

View Related Product: BOL-RF-42-4.5 FID: 666

Can these be used with skids and pallets? EPT-2547-30-SCLEPT-2748-45-SCLEPT-2796-45-SCL

Answer

The electric pallet truck with scale is designed for use with skids or open bottom pallets. There should be a minimum of 3-1/2" clearance.

View Related Product: EPT-2547-30-SCL FID: 343

Can these conveyors be washed down with sanitizing chemicals used in a food plant?

Answer

These are not suitable for wash down applications.

View Related Product FID: 308

Can these pallets be stored outside? How do they handle the weather? PWP-4840

Answer

No, they should not be stored outside. It is made of a press board type material that will absorb any moisture and start to disintegrate the pallet.

View Related Product: PWP-4840 FID: 442

Can these pallets be used to stack/store bricks outside? PLP2-4840-BLACK

Answer

These plastic pallets are ideal for export, pharmaceutical, medical, and food applications.

View Related Product: PLP2-4840-BLACK FID: 444

Can these racks be used with plastic drums?

Answer

While, yes, you can set plastic drums on the rack, you cannot stack another level on top of plastic drums, as plastic drums are not strong enough by themselves.

View Related Product FID: 759

Can these rotator box hoppers be stacked?

Answer

No, they cannot be stacked.

View Related Product FID: 1726

Can these systems be used with Edge-O-Dock Levelers? TL-100-F-STL-200-HP-F-S

Answer

No. The trailer lock systems can only be used with pit levelers.

View Related Product: TL-100-F-S FID: 6

Can these units be put in a cooler between 32 and 39 degrees? SL-118-AA

Answer

No, these cannot be put in coolers.

View Related Product: SL-118-AA FID: 250

Can this be changed to AC powered? JMD-1000-48JMD-1000-60JMD-1000-72

Answer

Yes, there are power options available. Please contact a sales associate for assistance.

View Related Product: JMD-1000-48 FID: 220

Can this be used in freezer temperatures? ULM-EPT-2745-44

Answer

Intermittent exposure of going in and out of the freezer, is not a problem. However, do not leave this in the freezer for any extended amount of time, for it is not made to withstand the cold temperatures.

View Related Product: ULM-EPT-2745-44 FID: 340

Can this be used on an incline / grade? PTM-GPT

Answer

We recommend these for use on a flat and level surface only. We don't have any sort of incline use information for this unit for liability reasons.

View Related Product: PTM-GPT FID: 1017

Can this be used with plastic drums? PRDC-36PRDC-36-RPRDC-42PRDC-42-R

Answer

The shape of a plastic drum can be affected by temperature and weight. As a result, We don't recommend these drum cradles for use with plastic drums.

View Related Product: PRDC-36 FID: 761

Can this bollard be locked in the folded-down position? PARK-P-108-FD

Answer

No, the bollard cannot be locked in the fold-down position.

View Related Product: PARK-P-108-FD FID: 677

Can this carry a pallet? HYD-RR-35

Answer

No, this is designed to transport heavy large rolls of material.

View Related Product: HYD-RR-35 FID: 332

Can this cart accommodate steel strapping that is 1-1/4" wide? STRAP-PS-HD

Answer

No, it cannot accommodate steel strapping 1-1/4" wide.

View Related Product: STRAP-PS-HD FID: 409

Can this heater run for longer than 50 hours continuously? HEAT-6P-230-1

Answer

It is not recommended to run the heater continuously for 50 hours. Recommend continuous usage is one hour. The operation can be resumed after 15 minutes.

View Related Product: HEAT-6P-230-1 FID: 164

Can this rack be used for outdoor storage? DRUM-RACK-2

Answer

The DRUM-RACK-2 can be used outside, but must be used on a flat, level, solid surface capable of holding the weight / capacity. However, it is a painted steal construction, so weather & environment could start to degrade the finish & the rack could start to rust, affecting the overall lifespan of the unit.

View Related Product: DRUM-RACK-2 FID: 759

Can this remain on the truck when the truck is moving? Are the components strong enough to withstand normal movement from traveling on a road? WTJ-HITCH

Answer

Per the owners manual you should NOT drive the vehicle while the crane is attached.

View Related Product: WTJ-HITCH FID: 579

Can this stacker be used in the sand? RT-S-62-AF

Answer

No, the stacker is not intended to be used in the sand.

View Related Product: RT-S-62-AF FID: 1509

Can this table be used continuously? EHLT-4872-4-43

Answer

The suggested use is 12 cycles per hour.

View Related Product: EHLT-4872-4-43 FID: 196

Can this warning bar ODG-133-BL be used outside? ODG-133-BL

Answer

The warning bar with warning siren and lights is not designed for use outdoors.

View Related Product: ODG-133-BL FID: 15

Can usable height be 38'' , with below ground 24''. I would think from your answer 10'' wouldn't be deep enough?. BOLPP-62-5.5

Answer

Above ground height is 62" and overall height is 72".

View Related Product: BOLPP-62-5.5 FID: 671

Can we order a Foot Control for any of the EHE or EHU tables? EHE-2

Answer

No, foot controllers cannot be used for the EHE or EHU tables.

View Related Product: EHE-2 FID: 207

Can we request the position of the stripes? PARK-P-108-FD-SS

Answer

The red stripes are labels which are shipped unattached. It is up to the customer to apply them if they choose.

View Related Product: PARK-P-108-FD-SS FID: 677

Can we use gel hand sanitizer with this unit? PHS-ALSD-01

Answer

The PHS-ALSD-01 dispenser is for liquid hand sanitizer only and holds 10.5 oz.

View Related Product: PHS-ALSD-01 FID: 1621

Can we use this in a washdown area? EXCNV-R-24-24

Answer

The expandable roller conveyors are powdered coat/zinc plated and would be subject to rust. They are not recommended for a washdown area.

View Related Product: EXCNV-R-24-24 FID: 308

Can work platforms be used with Telehandler? WP-3636WP-3648WP-4848WP-3636-84BWP-3648-84BWP-4848-84BWP-3636-DDWP-3648-DD+4 more

Answer

For safety reasons, please DO NOT mount a work platform on a telehandler, aka boom lift, or rough terrain forklift, even if the handler will be used on level concrete or asphalt.

View Related Product: WP-3636 FID: 470

Can WTJ-4 be mounted to a flatbed rather than a pickup truck? WTJ-4

Answer

Yes, WTJ-4 can be mounted to a flatbed. The flatbed base plate needs to be made of steel, and must be heavy-duty enough to hold the jib crane plus intended weight.

View Related Product: WTJ-4 FID: 578

Can you adjust the height of Model: TT-18-LA while the turntable is rotating? TT-18-LA

Answer

The turntable top and the linear actuator function independently of one another. The turntable is manual rotation, and the linear actuated height adjustment is powered.

View Related Product: TT-18-LA FID: 381

Can you attach a hose to this drum pump? LDP-ST

Answer

It is not recommended to attach a hose to the drum pump.

View Related Product: LDP-ST FID: 870

Can you confirm that this unit will accept a medium base PAR38 LED flood lamp? LL-40

Answer

Yes, the LL-40 dock loading light will accept any PAR38 medium base lamp.

View Related Product: LL-40 FID: 70

Can you increase the crushing force of the drum crushers to more than 38,000 lbs.? HDC-905-IDC/460VHDC-905-HC/460VHDC-905-IDC/230VHDC-905-HC/230VHDC-905-IDC/208VHDC-905-HC/208V

Answer

The HDC-905 units have a maximum crushing force of 38,000 lbs.

View Related Product: HDC-905-IDC/460V FID: 755

Can you please confirm the lifting capacity for EHN-60-T, the description on Home Depot website says 4,000 lb. capacity. EHN-60-T

Answer

The capacity for the EHN-60-T is 6,000 lbs.

View Related Product: EHN-60-T FID: 584

Can you please provide us with the scale range? What is the lowest weight that registers? SCALE-STS-44-5KSCALE-STS-44-10KSCALE-STS-55-5KSCALE-STS-55-10K

Answer

Lowest weight is 1 lbs. at optimal usage temp and altitude. 3 lbs. would be the easiest for it to read the weight in lbs. increments.

View Related Product: SCALE-STS-44-5K FID: 395

Can you store product on the base of the upright? HU-C-8-18HU-C-8-24HU-C-8-36HU-C-8-48HU-C-10-18HU-C-10-24HU-C-10-36HU-C-10-48+8 more

Answer

Yes, you can store product on the base of the upright.

View Related Product: HU-C-8-18 FID: 1094

Can you tell me how thick the shelving material is? DH-PH4-2472-3

Answer

The shelving is 12 gauge.

View Related Product: DH-PH4-2472-3 FID: 921

Can you tell me the dimensions of the openings of the grid? F-GRID

Answer

The F-GRID openings are 3/8" x 3-1/2".

View Related Product: F-GRID FID: 353

Can you tell me what the distance is between each hole is going vertical and horizontal on the E-TUG-HD-SBH-8? E-TUG-HD-SBH-8

Answer

Horizontal: 2-7/8" (3-3/8" on center).
Vertical: 7/8" (1-3/4" on center).

View Related Product: E-TUG-HD-SBH-8 FID: 1019

Can you tell me what the measurement is from the top of the top horizontal bar to the bottom of the bottom horizontal bar? Or, the distance between the bottom of the top horizontal bar and the top of the bottom horizontal bar? PRAIL-102-HD-Y-FF

Answer

The measurement is 26-1/4".

View Related Product: PRAIL-102-HD-Y-FF FID: 646

Could I use this bucket to melt hot tar block for driveway cracks? PAIL-STL-RI-UN

Answer

Ideal for use with oil based or solvent based material. Not recommended for water or water based material. Rated UN 1A2/Y1/2/70 for maximum efficiency.

View Related Product: PAIL-STL-RI-UN FID: 915

Do any of these have steel inserts? CB-1CB-2CB-3CB-4

Answer

Yes. The CB-1, CB-2, CB-3, and the CB-4 all have steel inserts.

View Related Product: CB-1 FID: 966

Do I need to buy a tensioner as well? PKG-PS-12

Answer

If it is one of our combo tools, then no, you will not need to buy a tensioner as well, since some of our combo tools are also tensioners. You will know if the tool acts as a tensioner based on if it is stated as such in the product title. For example, PKG-PS-12 is ONLY a sealer, while PKG-TSCP-5 is a sealer, cutter, AND tensioner.

View Related Product: PKG-PS-12 FID: 417

Do I need to purchase the EX-BRACKET-9 to mount these folding gates, or do the folding gates already come with brackets?

Answer

The folding gates come with a standard 2" L-bracket for mounting. The EX-BRACKET-9 is an option that extends the gate 6" or 9" from the wall/casing in order to clear overhead door tracks and bollards.

View Related Product FID: 750

Do the booms fall under ANSI ITSDF B56 standards? LM-EBTLM-OBTLM-1T

Answer

Yes, the lift master booms fall under the ANSI B56 standards.

View Related Product: LM-EBT FID: 473

Do the casters come assembled on the cart? PPT-2-41PPT-3-61

Answer

The handle and the casters must be assembled on the cart.

View Related Product: PPT-2-41 FID: 961

Do the clamp pads have rubber on them? S-MU-VRGR-72

Answer

Yes, the clamp pads have rubber protection.

View Related Product: S-MU-VRGR-72 FID: 1423

Do the J bolts that you anchor the base in the concrete come with the JIB? JIB-FM-3JIB-FM-6JIB-FM-10JIB-FM-20JIB-FM-40

Answer

No, the J-bolts do not come with the floor mounted JIB.

View Related Product: JIB-FM-3 FID: 529

Do the PLP4-4840-BLACK plastic pallets have PFAS in them? PLP4-4840-BLACK

Answer

There is no PFAS in the black pallet.

View Related Product: PLP4-4840-BLACK FID: 444

Do the steps of the SPN-2-YL-HR-PO have any resistance from slipping or sliding when used on a smooth floor? SPN-2-YL-HR-PO

Answer

Yes, these steps have 8 rubber feet on them to resist against slipping or sliding.

View Related Product: SPN-2-YL-HR-PO FID: 1427

Do the wheels of this dolly rotate? VPRDO-6

Answer

No, the wheels do not rotate.

View Related Product: VPRDO-6 FID: 1057

Do these automatically return to the upright position after you pull the chain to dump? D-100-LD-NB

Answer

Yes, they are self-returning. They may need to use the rear till on the fork truck, but they will not need to get off the fork truck.

View Related Product: D-100-LD-NB FID: 1702

Do these pallets have a drain plug? DR-1-UTDR-2-UT. DR-3-UTDR-4-UT

Answer

Yes, the ultra spill pallets have a drain plug.

View Related Product: DR-1-UT FID: 812

Do these plug in? VS-ECH-5-1PH

Answer

No. These do not have a plug.

View Related Product: VS-ECH-5-1PH FID: 549

Do these precision bearings come pre-greased?

Answer

Yes, they do come pre-greased.

View Related Product FID: 376

Do these stackers have a FREE LIFT (the forks are raised higher than the mast)? S-62-FAS-62-AAS-118-AAS-150-AAS-62-FFS-118-FF

Answer

We currently do not have a stacker in our product inventory with a free lift.

View Related Product: S-62-FA FID: 252

Do these units meets PASE or PALD standards? EPFC-16-LPEPFC-25EPFC-25-AAEPFC-CB-15

Answer

These floor cranes meet the PASE/PALD standards.

View Related Product: EPFC-16-LP FID: 586

Do you have a carpet pole diameter larger than 2 3/4"? CRP-108CRP-120CRP-144CRF-108CRF-120CRF-144CR-108-2CRF-120-2+4 more

Answer

We do not have alternate carpet pole sizes.

View Related Product: CRP-108 FID: 496

Do you have a Div1 Class1 motor for the stainless steel lift table? EHLTG-4470-4-48-PSS

Answer

No, we do not have motors for Div1 Class1.

View Related Product: EHLTG-4470-4-48-PSS FID: 208

Do you have a reel rotator with a 6" arbor? MWP

Answer

The MWP-RR can accommodate a reel with a 3" core.

View Related Product: MWP FID: 265

Do you have any type of guard to protect from the pinchpoint of the lower guide wheel/rollers ? JIB-FM-3JIB-FM-6JIB-FM-10JIB-FM-20JIB-FM-40

Answer

Yes, we can add a guard to the floor mounted JIB. Please contact a sales associate for details to modify this unit.

View Related Product: JIB-FM-3 FID: 529

Do you have any type of stop to keep the JIB from rotating 360°? JIB-FM-3JIB-FM-6JIB-FM-10JIB-FM-20JIB-FM-40

Answer

Yes, our engineering team can add a rotation stop. Please contact a sales associate for details.

View Related Product: JIB-FM-3 FID: 529

Do you have fork extensions for the stacker? S-62-FAS-62-AAS-118-AAS-150-AAS-62-FFS-118-FF

Answer

We do not. Fork extensions are NOT recommended for use with the stackers.

View Related Product: S-62-FA FID: 252

Do you have other sizes or capacities? LP-4000TLP-4000T-39LP-4000T-39-SSLP-4000T-45LP-4000T-45-SS

Answer

No, we are not able to offer custom diameters.

View Related Product: LP-4000T FID: 375

Do you have to hold the button the entire cycle or can you press it and walk away? HDC-905-IDC/460VHDC-905-HC/460VHDC-905-IDC/230VHDC-905-HC/230VHDC-905-IDC/208VHDC-905-HC/208V

Answer

This is hydraulic unit has a latching circuit that has an automatic operation after a single depression of the hand-held pendant. At the end of the cycle, the unit resets to the start position.
To interrupt operation, depress the E-Stop button.

View Related Product: HDC-905-IDC/460V FID: 755

Do you have to use the foot control to rotate the stretch wrap machine? SWA-60-AWSWA-82-AW

Answer

The AW models are automatic and do not use foot controls.

View Related Product: SWA-60-AW FID: 370

Do you know if the tube it's fabricated from is 1.00" diameter? DHHT-500SDHHT-500S-HR

Answer

Yes it is.

View Related Product: DHHT-500S FID: 993

Do you manually rotate the drum or is it powered? DRUM-LRT-DC-SCLDRUM-LRT-DCDRUM-LRT-DC-II

Answer

The DRUM-LRT-DC and the DRUM-LRT-DC-SCL have a manual rotation. The DRUM-LRT-DC-II has a powered rotation.

View Related Product: DRUM-LRT-DC-SCL FID: 783

Do you offer customization on the fork blade series? F4-36F4-42F4-48F4-60F5-36F5-42F5-48F5-60

Answer

No, we are unable to offer custom sizes. This series is molded plastic and limited to the standard sizes only.

View Related Product: F4-36 FID: 493

Do you offer Gel Batteries for your Electric Pallet Trucks?

Answer

We do not have an option for gel batteries. The closest we have is an AGM battery option, which is non-spillable like a gel battery.

View Related Product FID: 342

Does EPT-S-2748-40 have an onboard charger? EPT-S-2748-40

Answer

EPT-S-2748-40 has a 24V/115Ah bench top charger, which is included with the unit.

View Related Product: EPT-S-2748-40 FID: 1409

Does HRAIL-PNL come already assembled, or does it come in separate pieces? HRAIL-PNL

Answer

The HRAIL-PNL comes already assembled.

View Related Product: HRAIL-PNL FID: 749

Does it come assembled? If not, can I get it assembled? ST-TRUCK-300

Answer

It comes assembled.

View Related Product: ST-TRUCK-300 FID: 1009

Does LPDT work with fiber and plastic drums? LPDT

Answer

No, LPDT will only work with 55 Gallon Steel Drums.

View Related Product: LPDT FID: 789

Does model H-4000-1 have a dual voltage compatible with 50 HZ? H-4000-1

Answer

Yes, it is dual voltage.

View Related Product: H-4000-1 FID: 547

Does model HYD-5-LP feature a removable platform? HYD-5-LP

Answer

No, model HYD-5-LP platform is not removable.

View Related Product: HYD-5-LP FID: 261

Does model MWP-330-DC have regulatory approvals to be sold in EU, AUS/NZ and South Korea? MWP-330-DC

Answer

The unit is CE approved for the EU.

View Related Product: MWP-330-DC FID: 265

Does S-DK work with S-CB models? S-DK

Answer

S-DK does not work with S-CB models, but it does work with S-2CB models.

View Related Product: S-DK FID: 254

Does the 3 phase hoist have a plug or does it have to be hardwired? H-1000-3H-2000-3H-4000-3H-6000-3H-10000-3

Answer

The 3 phase hoists will need to be hardwired.

View Related Product: H-1000-3 FID: 547

Does the battery charger work with both 115V and 230V? PEL-88PEL-100PEL400

Answer

Yes, the charger used on the PEL-88 can be powered from a 208-230V circuit, but the power cord that comes with the charger has a 115V, 2-prong plug.

View Related Product: PEL-88 FID: 260

Does the bench in each cage image come with the cage? WPC-D-4X4-2WPC-D-4X6-2WPC-D-4X8-2WPC-D-4X4-3WPC-D-4X6-3WPC-D-4X8-3

Answer

The bench does not come standard with the driver cage, however it can be added as an option. Please contact a sales associate for details.

View Related Product: WPC-D-4X4-2 FID: 176

Does the CART-1000-LT have a velocity fuse? CART-1000-LT

Answer

Yes, CART-1000-LT does have a velocity fuse.

View Related Product: CART-1000-LT FID: 302

Does the CART-24-10-DC have a battery charge indicator? CART

Answer

The BCI (battery charge indicator) is included with the DC powered carts.

View Related Product: CART FID: 296

Does the CBB-3000-37 have auto-banding? CBB-3000-37

Answer

No. The cardboard bailer does not have auto-banding.

View Related Product: CBB-3000-37 FID: 1704

Does the DD-EX-E leave the chime attached to the drum? DD-EX-E

Answer

Yes, it does leave the chime on. It cuts inside the drum.

View Related Product: DD-EX-E FID: 850

Does the DGL-LED-Y-AC come with a plug? DGL-LED-Y-AC

Answer

No, it does not. The lights come with a short wire lead which you can wire to your own control box or add a plug.

View Related Product: DGL-LED-Y-AC FID: 24

Does the DLH-CL2-1 work with plastic drums? DLH-CL2-1

Answer

Yes, this will work with plastic drums.

View Related Product: DLH-CL2-1 FID: 1420

Does the drum retention basin have a drain plug? VSRB-YL-2VSRB-YL-4

Answer

No, there is no drum plug on the drum retention basin.

View Related Product: VSRB-YL-2 FID: 806

Does the drum truck have steel or metal hubs? DBT-1000

Answer

The DBT-1000 with hard rubber wheels has a hard plastic hub.
The DBT-1000-PN with pneumatic wheels has a steel hub.

View Related Product: DBT-1000 FID: 794

Does the DRUM-LRT-DC-SCL work with both steel and fiber drums? DRUM-LRT-DC-SCL

Answer

No. The DRUM-LRT-DC-SCL is recommended for use with 55 gallon steel drums only.

View Related Product: DRUM-LRT-DC-SCL FID: 783

Does the EB-1 have a steel insert? EB-1

Answer

No. There is no steel insert for the EB-1.

View Related Product: EB-1 FID: 966

Does the ESE series chair and stool come with both the wheels and foot pads? ESE-WC-2232

Answer

Yes, ESE-WC-2232 and ESE-WS-1927 both come with foot pads and plastic casters.

View Related Product: ESE-WC-2232 FID: 1713

Does the FDA-550 work with the DRUM-LRT-EC for a fiber drum? DRUM-LRT-EC

Answer

Yes, the FDA-550 with the DRUM-LRT-EC will work for a fiber drum.

View Related Product: DRUM-LRT-EC FID: 782

Does the front of CSC-DD have a pull down piece to close it off, or does it have to stay open? CSC-DD

Answer

The front middle of the CSC-DD cart stays open- it does not close.

View Related Product: CSC-DD FID: 934

Does the gantry come with a hoist? FHS-50FHS-2-10FHS-2-15FHS-2-20FHS-4-10FHS-4-15FHS-4-20FHS-6-10+7 more

Answer

The hoists and trolleys for the fixed height steel gantry cranes are sold separately. You'll find multiple options available.

View Related Product: FHS-50 FID: 519

Does the gantry come with a hoist? AHS-2-10-12AHS-2-1514AHS-2-20-16AHS-4-10-14AHS-4-10-16AHS-4-15-12AHS-4-15-16+10 more

Answer

The hoists and trolleys for the adjustable height steel gantry cranes are sold separately. You'll find multiple options available.

View Related Product: AHS-2-10-12 FID: 517

Does the gate swing shut? SDG-8SDG-9SDG-10

Answer

The SDG-8, SDG-9, and SDG-10 are closed manually.

View Related Product: SDG-8 FID: 13

Does the L-220-DC-HD have a battery charge indicator on it? L-220-DC-HDL-270-DC-HD

Answer

The L-220-DC-HD and the L-270-DC-HD come standard with a battery charge indicator.

View Related Product: L-220-DC-HD FID: 238

Does the lid have a rubber ring on it so it's airtight? PAIL-SCR-5-W

Answer

WATERPROOF: YES (high pressure or heat will damage gasket) WATERTIGHT: YES AIRTIGHT WEATHER PROOF: KIND OF (high heat can damage gasket) SPILL PROOF: YES (please don not drop full pail to test this. These are not shatter proof)

View Related Product: PAIL-SCR-5-W FID: 915

Does the mounting hardware come with the posts? GR-H2R-BO-TP18-YLGR-H2R-BO-TP42-YLGR-H2R-BO-TP60-YLGR-H2R-BO-TP72-YLGR-H2R-DI-TP18-YLGR-H2R-DI-TP42-YLGR-H2R-DI-TP60-YLGR-H2R-DI-TP72-YL

Answer

The mounting hardware to mount the rails comes standard with the posts. The anchor bolts to mount the posts is an option and can be found under the options tab.

View Related Product: GR-H2R-BO-TP18-YL FID: 654

Does the mounting hardware come with the railing? VDKR-BP-5-YL

Answer

The hardware is not included. They are available in a 4 pack - one is needed per railing. 1/2" x 4" anchor bolts. The part number is AS-124-4pk.

View Related Product: VDKR-BP-5-YL FID: 1767

Does the ODG-120-BL have a siren? ODG-120-BL

Answer

Yes, the ODG-120-BL has blinking lights and a siren.

View Related Product: ODG-120-BL FID: 15

Does the PEL-400S-57-D3-KEG come with the platform or just the keg attachment? PEL-400S-57-D3-KEGPEL-400S-72-D3-KEG

Answer

The PEL unit comes with both the platform and the keg attachment.

View Related Product: PEL-400S-57-D3-KEG FID: 260

Does the scale have multiple units of measure? SPT-2448-SCLSPT-3060-SCLSPT-3072-SCL

Answer

The scale on the SPT-2448-SCL, SPT-3060-SCL, SPT-3072-SCL can measure KG, G and LBS. Unit of measure in LBS extends to 4 places (i.e. .0001).

View Related Product: SPT-2448-SCL FID: 946

Does the scale measure in lbs. or kgs? PM-2048-SCL-LP.PM-2748-SCL-LPPM-2048-SCL-LP-PTPM-2748-SCL-LP-PTPM-2045-SCL-LP-SSPM-2745-SCLLP-SS

Answer

The scale defaults to measurement in pounds. There is a function to convert measurement to Kilograms.

View Related Product: PM-2048-SCL-LP.PM-2748-SCL-LP FID: 318

Does the SST-45 have a lock to stop the top from rotating ? SST-45SST-45-STSST-45-PSSSST-45-PSS-ST

Answer

We do not have a lock option for the SST products.

View Related Product: SST-45 FID: 273

Does the trash compactor work with a fiber drum? MTC-55

Answer

The fiber drum should work as long as the 21" diameter compacting plate fits.

View Related Product: MTC-55 FID: 757

Does the trash compactor work with plastic drums? MTC-55

Answer

The MTC-55 is designed to work with 30 or 55 gallon drums. Platen size is 21".

View Related Product: MTC-55 FID: 757

Does the truck jib come with a charger? WTJ-2WTJ-4WTJ-2-GWTJ-4-GWTJ-2-SSWTJ-4-SS

Answer

The WTJ is intended to be hooked up to a truck battery. If using the jib in some other application other than mounting on a truck, we suggest a 12V car battery that can be purchased at most stores locally.

If the jib is hooked up to truck, a charger is not needed. If using in some other application, a charger can be purchased with the battery.

View Related Product: WTJ-2 FID: 578

Does the ULM-EPT-2745-44 have an onboard battery charger? ULM-EPT-2745-44

Answer

No, ULM-EPT-2745-44 comes with outside (bench top) charger.

View Related Product: ULM-EPT-2745-44 FID: 340

Does the unit have a containment pallet included? DSHRT-2

Answer

Spill pallet with drain is included.

View Related Product: DSHRT-2 FID: 811

Does these come with the buckles, and if so, how many? ST-12-16X3-BL

Answer

No, the strapping does not come with buckles.

View Related Product: ST-12-16X3-BL FID: 415

Does this applicator use a standard aerosol can or the T-tip can? LINE-SALINE-SA-W

Answer

The applicator uses a standard aerosol can.

View Related Product: LINE-SA FID: 142

Does this come pre-assembled, or do I have to put it together myself? PLP2-4840-YELLOW

Answer

It comes as one solid piece, so no assembly is required.

View Related Product: PLP2-4840-YELLOW FID: 444

Does this come with a Channeler to anchor in concrete to mount too? FM-2566

Answer

UNIT COMES WITH HANDLE AND BUMPERS. We also have a EDGE-O-DOCKLEVELER OPTIONAL CURB EDGE (CE) available.

View Related Product: FM-2566 FID: 5

Does this electric pallet truck come with an onboard charger? EPT-2748-26

Answer

The EPT-2748-26 does not come with an onboard charger.

View Related Product: EPT-2748-26 FID: 341

Does this fan oscillate? CCRF-24-W

Answer

The CCRF-24-W does not oscillate.

View Related Product: CCRF-24-W FID: 123

Does this gate swing in both directions? VDKR-G3VDKR-G4VDKR-G3-B

Answer

Yes, the gate swings in both directions.

View Related Product: VDKR-G3 FID: 642

Does this lifter arrive assembled? HWL-330

Answer

Yes, it comes assembled.

View Related Product: HWL-330 FID: 267

Does this model have or need a brake? WALL-D

Answer

WALL-D and WALL-S have a friction plate so they do not unwind uncontrollably.

View Related Product: WALL-D FID: 593

Does this product come assembled? HDOS-2448-6SW

Answer

Yes, it does come assembled.

View Related Product: HDOS-2448-6SW FID: 1034

Does this product lock in both directions? WALL-D

Answer

The handle is locked in both directions unless it is released.

View Related Product: WALL-D FID: 593

Does this scale have a port on the readout when I can attach to a buzzer or alarm light? VLPFS-4A

Answer

There is only one port available.

View Related Product: VLPFS-4A FID: 396

Does this scale read in 0.2 or 0.5 increments? VLPFS-2VLPFS-4AVLPFS-4BVLPFS-20

Answer

This scale can read in both.

View Related Product: VLPFS-2 FID: 396

Does this scale read in 0.2 or 0.5 increments? SCALE-LP-44-5KSCALE-LP-44-10KSCALE-LP-44-20K

Answer

The scale would automatically come calibrated in 1 lb. increments, but can be modified to 0.5 lb. increments.

View Related Product: SCALE-LP-44-5K FID: 392

Does this stretch wrap machine have fork pockets so it can be moved? SWA-54SWA-60

Answer

Yes, the SWA-54 and the SWA-60 have fork pockets.

View Related Product: SWA-54 FID: 368

Does this stretch wrap machine have fork pockets so it can be moved? SWA-50SWA-70

Answer

No it does not. Please see the SWA-54 and the SWA-60 that include fork pockets.

View Related Product: SWA-50 FID: 367

Does this wheel chock (LWC-15) have a weight capacity or gross vehicle weight rating? LWC-15

Answer

15 Tons.

View Related Product: LWC-15 FID: 79

Does Vestil have a plastic 48x48 pallet that is FM certified?

Answer

No, Vestil does not currently offer a plastic 48x48 pallet that is FM certified.

View Related Product FID: 444

Does VPS-60 come with chains to secure it to the forklift? VPS-60

Answer

Yes, the VPS-60 does come with chain to secure the broom to the forklift.

View Related Product: VPS-60 FID: 498

Does/Can the scale integrate into a PC from the cart? CART-1000-SCLCART-1000D-DC-SCCART-1500D-DC-CTD-SCCART-500-SCLCART-500-SCL-PSS

Answer

Yes, it does integrate.

View Related Product: CART-1000-SCL FID: 287

For D-TR-72, what keeps the extended ramp in place/what prevents the ramp from collapsing when extended? Is there some kind of safety anti-retracting device on the unit? When it is retracted, how does it stay in place? Is there some kind of latch or pin to hold it in the retracted position? D-TR-72

Answer

It is held in place from friction and ground contact. These are used at such a gradual angle that when the lip is resting on the upper surface, and the bottom of the ramp is in contact with the ground. There is a plate welded to the underside of the top ramp, at the upper end of it, and then there's also a plate welded to the TOP of bottom ramp section, at the lower end of it. This will prevent the two ramps from overextending/coming apart.

View Related Product: D-TR-72 FID: 54

For model POS-2133-ROPE are the wheels swivel (any direction) or fixed direction? POS-2133-ROPE

Answer

The wheels for POS-2133-ROPE are swivel wheels.

View Related Product: POS-2133-ROPE FID: 1038

For model STOR-96-G-W-1RH is the roof slanted? What is the snow load capacity? STOR-96-G-W-1RH

Answer

The roof is not slanted. The roof can support snow weight up to 45 lbs per square foot.

View Related Product: STOR-96-G-W-1RH FID: 170

For model VWS-770-AA-DC it says "Lifting Speed Loaded (seconds): 3.35". Is the measure of travel 3.35 inches in 1 second? VWS-770-AA-DC

Answer

No, that means it takes the unit 3.35 seconds to lift a load from floor to max height.

View Related Product: VWS-770-AA-DC FID: 246

For MRR-2310, can you put 3 together? Need extra wide? MRR-2310

Answer

Yes, you can put three together.

View Related Product: MRR-2310 FID: 60

For PVC-48-WH, how many come in 1 pack? What is the total length? PVC-48-WH

Answer

They come as one corner protector per one pack. PVC-48-WH is 48" long.

View Related Product: PVC-48-WH FID: 728

For the AHS-STOL, what size bolts would we need to anchor this to the floor? AHS-STOL

Answer

To anchor it to the floor, you will need 1/2" bolts.

View Related Product: AHS-STOL FID: 517

For the electric hydraulic dock levelers, are there any industry standards or guidelines that need to be followed for conduit placement in a pit for an EH ? EH-65-20

Answer

The National Electrical Code indicates the requirements and limitations for approved premises wiring methods, including access requirements.
There is a lot of leeway for placement of a conduit used to provided power and control wiring to the inside of the dock leveler. The location for the end of the raceway in the pit wall merely needs to allow for connection to whatever wiring method is chosen for the power and control circuit run.

View Related Product: EH-65-20 FID: 4

For the HBD-GATE options, how are these powered? HBD-GATE

Answer

The HBD-GATEs have magnetic switches; there will be two wires coming from that switch that will need to be connected to the main HBD unit for power.

View Related Product: HBD-GATE FID: 226

For the PI-S-4400-3761 can it be stopped at 90 degrees? PI-S-4400-3761

Answer

The pallet inverter has a 180° rotation and can be stopped in between at any angle.

View Related Product: PI-S-4400-3761 FID: 225

For the PM2-3344-SLP, what is the distance from the end of the fork to the front roller? PM2-3344-SLP

Answer

The distance from the end of the fork to the front roller is 8".

View Related Product: PM2-3344-SLP FID: 313

For the portable scissor table with the power traction drive system does the battery have multiple charging ports? PST-2448-2-46PST-PTDS-E

Answer

Both the power traction drive and the lifting portion of the lift will run off of the PTDS batteries and have a single charging port.

View Related Product: PST-2448-2-46 FID: 203

For the portable scissor table with the power traction drive system, do both units us the PTDS battery or will they each have their own? PST-2448-2-46PST-PTDS-E

Answer

Both the power traction drive and the lifting portion of the lift will run off of the PTDS batteries.

View Related Product: PST-2448-2-46 FID: 203

For the PWP-4840, is the binding resin phenol or urea based? PWP-4840

Answer

The pallets have a urea base resin.

View Related Product: PWP-4840 FID: 442

For the WL-100 Pit Depth with the Roll-Over option, does it impact the lowered height? WL-100

Answer

The WL-100 PIT DEPTH with ROLL-OVER OPTION increases the lowered height 2".

View Related Product: WL-100 FID: 1

How are forks and outriggers are “locked” into place? PMC-VHPS-2000-AA

Answer

The outriggers are secured with bolts and the forks rely on static weight.

View Related Product: PMC-VHPS-2000-AA FID: 1460

How do End Plates, model SPB-NP-EP-RF, go onto the blade? SPB-NP-EP-RF

Answer

These end plates are retrofit, and require the user to drill the mounting holes.

View Related Product: SPB-NP-EP-RF FID: 505

How do I adjust the outriggers to sit level? VHPS-2000-AA-17VHPS-2000-AA-35VHPS-2000-AA-118VHPS-3000-AA-17VHPS-NM-1000-AA

Answer

The outriggers are adjustable. To move the outriggers, tighten the bolts on the legs . Start by loosening them all and the unit will sit level. Tighten the bolts just until they start to touch the outrigger frame. If needed, adjust the legs to level it, by tightening the top bolts on the leg opposite of the wheel needing lowered.

View Related Product: VHPS-2000-AA-17 FID: 246

How do the lights and siren on the ODG-120-BL shut off? ODG-120-BL

Answer

The strobe/siren has a position sensor. When the sensor is "bumped" or tilted at an angle the strobe/siren will activate . The strobe/siren will cease once the strobe returns to its vertical position.

View Related Product: ODG-120-BL FID: 15

How do we install a dock seal? D-150-10D-150-11D-150-12D-150-13D-150-14-D-150-15D-150-16D-150-17D-150-18+2 more

Answer

Installing a dock seal is simple and can be performed with basic tools. Comprising of flat and angle brackets installation is simple and can be performed in an hour or two depending on experience. For installation instructions email us at info@vestil.com

View Related Product: D-150-10 FID: 19

How do you attach these to the wall? PVC-48R-WH

Answer

Securely attach to corner with glue or construction adhesive (not included). Holes may also be drilled to allow for bolt-on installation (hardware not included).

View Related Product: PVC-48R-WH FID: 728

How do you control the powered mast? Do you have to keep pressing the up and down buttons for it to move? Is there a stop button? SWA-5070LP-PMOSWA-5070LP-PMO-RF

Answer

The Powered Mast Options (-PMO and -PMO-RF) have a hand control. The user must hold the up or down button for the wrap to move. There is no stop button as the mast will stop when the button is released.

View Related Product: SWA-5070LP-PMO FID: 367

How do you control the powered mast? Do you have to keep pressing the up and down buttons for it to move? Is there a stop button? SWA-5460-PMOSWA-5460-PMO-RF

Answer

View Related Product: SWA-5460-PMO FID: 368

How do you move the Heavy-Duty Cradle Carts (DCC) around? DCC-80DCC-2860-4DCC-2896-4DCC-2860-10DCC-2896-10DCC-28120-10

Answer

These units are designed to be pushed as there is NOT a handle or a tow bar to pull it with.

View Related Product: DCC-80 FID: 1051

How do you move these carousels? Is there something to use to lift them? LP-4000TLP-4000T-45LP-4000T-39LP-4000T-SSLP-4000T-45-SSLP-4000T-39-SS

Answer

We recommend wedging something between the floor and the carousel (crowbar, prying tool, etc...) and just lift it up a bit so forks can insert under the carousel to lift it .

View Related Product: LP-4000T FID: 375

How do you raise and lower model WPT-1624? WPT-1624

Answer

Manual actuation. Variable positioning, essentially at whatever point along the service range, when tension is applied via the lock handle.

View Related Product: WPT-1624 FID: 235

How does it draw the liquids up? Is there a hose or tube not pictured? VDPX

Answer

Manual drum pump design dispenses and transfers liquids for ideal operation. VDP includes a two (2) piece dip tube with connector. The VDPX does have an additional tube that goes into the drum. It comes in 2 pieces for a smaller shipping package.

View Related Product: VDPX FID: 868

How does the emergency stop button option work?

Answer

The Emergency Stop Button Kit allows the operator to shut off fork truck power from the work platform. It works with both gas and electric fork trucks.

View Related Product FID: 470

How does the onboard charging system work on the CBFC-1000-DC? CBFC-500-DCCBFC-1000-DCCBFC-2000-DC

Answer

Customer uses their own extension cord to charge. One end plugs into the power unit and the other end plugs into the wall.

View Related Product: CBFC-500-DC FID: 587

How does the optional 29-189 work? AIR-THL

Answer

The 29-189 Air Vibrator comes with a Simple Manual On/Off Valve. Operator should not turn the Vibrator on and walk away with the Vibrator unattended. The vibrator is only intended to be on for a short duration, just long enough to knock down the material angle of repose near the vacuum lance. Operator should turn on vibrator, watch material fill in around vacuum lance, and then turn off vibrator.

Air Vibrator is not available with Automatic On/Off. Must use hand controls.

View Related Product: AIR-THL FID: 222

How does the stretch wrap machine attach to the scale? SWA-54-SCALESWA-60-SCALE

Answer

The stretch wrap machine sits right on top of the scale for easy assembly, or they can be bolted together before shipping to you with the factory installation option PLATF-MTG-CA.

View Related Product: SWA-54-SCALE FID: 368

How does the stretch wrap machine attach to the scale? SWA-50-SCALESWA-70-SCALE

Answer

The stretch wrap machine sits right on top of the scale for easy assembly, or they can be bolted together before shipping to you with the factory installation option PLATF-MTG-CA.

View Related Product: SWA-50-SCALE FID: 367

How does the stretch wrap machine attach to the scale? SWA-48-SCALE

Answer

The stretch wrap machine sits right on top of the scale for easy assembly, or they can be bolted together before shipping to you with the factory installation option PLATF-MTG-CA.

View Related Product: SWA-48-SCALE FID: 369

How does the stretch wrap machine attach to the scale? SWA-60-AW-SCL

Answer

The stretch wrap machine sits right on top of the scale for easy assembly, or they can be bolted together before shipping to you with the factory installation option PLATF-MTG-CA.

View Related Product: SWA-60-AW-SCL FID: 370

How far apart are the holes on the plate of the floor lock? FL-6

Answer

2-3/4" x 3-3/8" center to center.

View Related Product: FL-6 FID: 1063

How fast does it move up and down? TT-18-LA

Answer

It takes approximately 1-1/2 minutes to go from the lowered position to the raised position.

View Related Product: TT-18-LA FID: 381

How fast does model POS-3636-EH raise and lower? POS-3636-EH

Answer

Speed is approximately 3.5 seconds per inch, 55 seconds for 16"

View Related Product: POS-3636-EH FID: 356

How fast does the PEL raise and lower? PEL-88PEL-100PEL400

Answer

All PEL's, 88, 400, and A models are about the same speed fully loaded, or unloaded at maximum speed setting approximately 3.6 inches per second up, and 4.5 in/second down. The PEL100A is slightly slower because the pitch on the screw is different. The speed can be slowed down via the touchpad speed control.

PEL88, 88A, 400-57 is approximately 14 seconds raise, 11 seconds lower time.

PEL 100, 100A, and 400-72 is approximately 18 seconds raise, 15 seconds lower time.

View Related Product: PEL-88 FID: 260

How fast does the platform raise and lower? MWP-330-DC

Answer

The MWP-30-DC has a lift speed of 30 seconds and a lowering speed of 29 seconds.

View Related Product: MWP-330-DC FID: 265

How hard or soft is the CB-3? CB-3

Answer

Durometer reading: 65±3

View Related Product: CB-3 FID: 966

How high can HT-02-1616A go when it is full extended all the way up? HT-02-1616A

Answer

When it is extended all the way up it measures 49".

View Related Product: HT-02-1616A FID: 285

How high does the unit raise per crank? LLW-PAILD-100LLW-PAILD-200

Answer

Approximately 1-1/8" per rotation

View Related Product: LLW-PAILD-100 FID: 901

How is the MRCG-20 secured? Adhesive or hardware? MRCG-20

Answer

MRCG-20 does not come with pre-drilled holes. It weighs about 6 lbs, so a customer could use a heavy duty adhesive to secure it. If you would like to use hardware, you would have to drill holes yourself, and buy the hardware needed.

View Related Product: MRCG-20 FID: 731

How is the rope released once it is locked for WALL-S and WALL-D? WALL-D WALL-S

Answer

WALL-S and WALL-D are worm gear winches. This means the rope, wire, or cable will not release until the manual crank handle is turned to raise or lower the load.

View Related Product: WALL-D WALL-S FID: 593

How is the scale powered on this steel platform truck? SPT-2448-SCLSPT-3060-SCLSPT-3672-SCL

Answer

The LCD scale operates on six (6) AA batteries. The scale has five function keys including Zero, Tare, Net/Gross, Print, LB./KG. Scale head includes port for serial printing.

View Related Product: SPT-2448-SCL FID: 946

How is the temperature controlled within a range for HEAT-6P-230-1? HEAT-6P-230-1

Answer

The temperature is controlled through a light adjustment, the brighter the light, the higher the temperature.

View Related Product: HEAT-6P-230-1 FID: 164

How large a reel (outside diameter) will work with the MWP-RR? MWP

Answer

The MWP-RR can accommodate a reel with a maximum exterior measurement of 9-13/16".

View Related Product: MWP FID: 265

How large are the openings in the grid work for APG-M-38? APG-M-38

Answer

The standard is a 2 x 2 opening.

View Related Product: APG-M-38 FID: 753

How long and how wide is the tape with this kit? CS-AK-4

Answer

The tape is 4" wide and 6' long.

View Related Product: CS-AK-4 FID: 111

How long can the battery be run before the next charge on CBFC-2000-DC? CBFC-2000-DC

Answer

If fully charged, the battery will run for approximately 28 minutes of total run time or approximately 90 complete raise/lower cycles. The battery gauge should display approximately 50% charge after running this many cycles.

View Related Product: CBFC-2000-DC FID: 587

How long can the battery be run before the next charge on CBFC-500-DC and CBFC-1000-DC? CBFC-500-DCCBFC-1000-DC

Answer

If fully charged, the battery will run for approximately 28 minutes of total run time or approximately 160 complete raise/lower cycles. The battery gauge should display approximately 50% charge after running this many cycles.

View Related Product: CBFC-500-DC FID: 587

How long can this hoist continuously run, with 400 - 500 lbs. load on it, and how much time must the hoist be "off" to allow for the motor/contacts to cool down? EMH-10

Answer

Continuous usage of the hoist would be 15 minutes.
Rest time between usage would be 45 minutes.

View Related Product: EMH-10 FID: 554

How long do the bristles last on this brush? VSWP-48VSWP-60VSP-60VSP-72

Answer

The life of the bristles on the brush depend on usage. Replacement brushes are available.

View Related Product: VSWP-48 FID: 498

How long does it take CART-LP-2000-2040-DC to go from the lowered position to maximum height ? CART-LP-2000-2040-DC

Answer

CART-LP-2000-2040-DC will raise from the lowered position to maximum height in 14 seconds.

View Related Product: CART-LP-2000-2040-DC FID: 1428

How long does it take for ABLT-1000 to reach the raised height? ABLT-1000

Answer

Raised height with no load is 2.25 seconds.
Lowered height with no load is 30.75 seconds.
Raised height loaded is 10.13 seconds.
Lowered height loaded is 12.6 seconds.

View Related Product: ABLT-1000 FID: 198

How long does it take for the battery to recharge for CBFC-500-DC, CBFC-1000-DC and CBFC-2000-DC? CBFC-500-DCCBFC-1000-DCCBFC-2000-DC

Answer

We recommend charging the battery when it displays approximately 50% on the battery gauge. At this level, it will take approximately 10 hours to fully charge the battery.

View Related Product: CBFC-500-DC FID: 587

How long does it take to assemble the storage unit? STOR-96-G-W-1RHSTOR-912-G-W-1RH

Answer

Estimated assembly time for the Storage Building is 2.5 hours per unit with two people using simple hand tools.

View Related Product: STOR-96-G-W-1RH FID: 170

How long does it take to charge the battery for the E-TUG-30 ? E-TUG-10E-TUG-20E-TUG-30

Answer

The battery for the E-TUG-10, E-TUG-20, and E-TUG-30 will be fully charged in approximately 5 hours. If the battery is dead it may take up to 8 hours to be fully charged.

View Related Product: E-TUG-10 FID: 1019

How long does it take to charge the battery for the TCD-U-48-DC or the TCD-U-60-DC? TCD-U-48-DCTCD-U-60-DC

Answer

It takes approximately 6-8 hours to charge the battery.

View Related Product: TCD-U-48-DC FID: 228

How long does it take to charge the battery. EPT-4548-45-RL

Answer

The battery will charge in 8-10 hours.

View Related Product: EPT-4548-45-RL FID: 1435

How long does it take to get a full charge from a dead battery on table? PST

Answer

Allow 8 hours to charge a dead battery.

View Related Product: PST FID: 203

How long does it take to raise the cart? AIR-800-D

Answer

It takes approximately 36 seconds to raise the Air-800-D cart to 51".

View Related Product: AIR-800-D FID: 301

How long does it take to turn the wheel for DRUM-LRT-ESJ to be able to dump? DRUM-LRT-ESJ

Answer

It takes about 1 to 1-1/2 minutes to rotate the DRUM-LRT-ESJ to be able to dump.

View Related Product: DRUM-LRT-ESJ FID: 782

How long does the battery charge last? RT-S-62-AF

Answer

The battery charge lasts 2 hours for continuous usage, and 6 to 8 hours for intermittent usage.

View Related Product: RT-S-62-AF FID: 1509

How long does the battery last on the TCD-U-48-DC or the TCD-U-60-DC? TCD-U-48-DCTCD-U-60-DC

Answer

Under normal conditions, the battery will last approximately 3.5 hours when raised every 5 minutes. The battery will last approximately 7.5 hours when raised every 10 minutes.

View Related Product: TCD-U-48-DC FID: 228

How long is the chain on the EHN-40-C? EHN

Answer

The chain on the EHN-40-C is 7".

View Related Product: EHN FID: 585

How long is the strap on the CB-W-S-cylinder bracket? CB-W-S

Answer

The strap is 37" long.

View Related Product: CB-W-S FID: 873

How long to charge the battery? RT-S-62-AF

Answer

The charging time is 8 to 10 hours.

View Related Product: RT-S-62-AF FID: 1509

How long will the charge last on the battery and what are the working hours for model SC-06? SC-06

Answer

The battery will last 4 to 6 hours for continuous usage. The battery charging time is 6 to 8 hours.

View Related Product: SC-06 FID: 576

How long will the E-TUG-10 run? E-TUG-10E-TUG-20E-TUG-30

Answer

The E-TUG-10, E-TUG-20, and E-TUG-30 will operate approximately 4 hours of continuous use on a fully charged battery. For intermittent use, you can expect 8 hours .

View Related Product: E-TUG-10 FID: 1019

How long will the EPT-4548-45-RL run on a charge? EPT-4548-45-RL

Answer

The pallet truck will run continuous for 3-4 hours. With intermittent use, the battery will last 7-8 hours.

View Related Product: EPT-4548-45-RL FID: 1435

How loud is the motor in the model SCTAB-1000-2040-AC? SCTABSCTAB-1000-2040-AC

Answer

The power unit is approximately 72 dB at 2 feet away.

View Related Product: SCTAB FID: 292

How many "hand pumps" it takes to lift a cylinder? LP-6

Answer

It would take 12 pumps from lowered position to raised position.

View Related Product: LP-6 FID: 895

How many cycles per full battery? PST

Answer

Here are the approximate cycles for the portable scissor lift table.
1 cycle every 5.72 minutes for 7.5 hours.
1 cycle every 11.44 minutes for 15 hours.
1 cycle every 17.16 minutes for 22.5 hours.

View Related Product: PST FID: 203

How many cycles can I get on one charge and how long does it take to charge? PEL-88PEL-100PEL400

Answer

This will vary depending on how high the load is lifted, how much weight is lifted, the age of the batteries, and the battery type.

The PEL88, 88A, and 100 will last about 200 cycles continuous or, 1 cycle every 5 minutes for 8 hours. Charge time is anywhere from 4 to 6 hours depending on the condition of the battery, age, etc.

The PEL400 will last about 300 to 400 cycles continuous or, 1 cycle every 4 minutes for 8 hours. Charge time is anywhere from 6 to 8 hours depending on the condition of the battery, age, etc.

View Related Product: PEL-88 FID: 260

How many cylinders does the AIR-1500-D-PSS have? AIR-1500-D-PSS

Answer

The cart has 2 cylinders.

View Related Product: AIR-1500-D-PSS FID: 301

How many detents (CA-HOD) are there if we add that option to the king pin carousel? CA-KPCA-HOD

Answer

There will be one locking detent welded to the base, and (4) locking positions welded to the top plate, 90° apart.

View Related Product: CA-KP FID: 374

How many drums can this lift per hour? HDC-305-96-DC

Answer

A maximum of 12 drums per hour is recommended.
It takes approximately 30 seconds to raise, and approximately 18 seconds to lower.

View Related Product: HDC-305-96-DC FID: 764

How many extensions can I add to the pigeon hole rack LBPH-77? LBPH-77LBPH-EXT

Answer

You can add an unlimited number of extensions (LBPH-EXT) to the LBPH-77. The capacity is 7,700 lbs. with the extensions.

View Related Product: LBPH-77 FID: 1111

How many feet does the MSB-138 expand? MSB-138

Answer

Expands to 138" (11-1/2 ft).

View Related Product: MSB-138 FID: 745

How many keys come with CSC-DD? CSC-DD

Answer

Each CSC-DD comes with 2 keys.

View Related Product: CSC-DD FID: 934

How many lifts per battery charge for the CART-1500-DC-CTD? CART-1500-DC-CTD

Answer

20-30 cycles per continuous use per charge.

View Related Product: CART-1500-DC-CTD FID: 298

How many ounces is the material the Dock Seal/Shelter, series D-150/650? D-150/650

Answer

The face and side pads of the dock seal/shelter are constructed with 54 oz. material. The top flap is constructed with 40 oz. material.

View Related Product: D-150/650 FID: 20

How many post does the GR-H2R-DI-TP60-HDG system have? GR-H2R-DI-TP60-HDG

Answer

The tubular post is an addition to the guard rail system. Guard rail level (qty.): 3.

View Related Product: GR-H2R-DI-TP60-HDG FID: 654

How many posts does the GR-H2R-DI-TP42-HDG system have? GR-H2R-DI-TP42-HDG

Answer

Guard rail level (qty.): 2. One post. The tubular post is an addition to the guard rail system.

View Related Product: GR-H2R-DI-TP42-HDG FID: 654

How many pumps does it take for the pallet truck to get to the maximum raised height of 7-3/4"? PM4-3348-RLPM4-4048-RLPM4-4548-RL

Answer

Each full pump raises the forks approximately 1". It would take approximately 8-10 pumps to reach the raised height of 7-3/4".

View Related Product: PM4-3348-RL FID: 330

How many pumps does it take to extend the boom? CBFC-2000

Answer

It is approximately 30 pumps to extend the boom.

View Related Product: CBFC-2000 FID: 587

How many pumps does it take to raise DRUM-LRT-ESJ to 53"? DRUM-LRT-ESJ

Answer

It takes 56 pumps without load to raise DRUM-LRT-ESJ to 53".

View Related Product: DRUM-LRT-ESJ FID: 782

How many pumps does it take to raised height? ABS-130

Answer

Fully loaded would be approximately 31 pumps. An unloaded unit would be approximately 30 pumps to the raised height.

View Related Product: ABS-130 FID: 269

How many pumps to the raised height for CART-1000-D-FR? CART-1000-D-FR

Answer

Approximately 60-64 pumps to the raised height of 61-1/2".

View Related Product: CART-1000-D-FR FID: 288

How many pumps would it take to raise to full height on the PP-2072? PP-1572-36PP-2066PP-2072PP-2566PP-2572P-3066993072

Answer

It would take approximately 25 strokes.

View Related Product: PP-1572-36 FID: 5

How many rails would this cart hold? PRAIL-CT-1

Answer

The PRAIL-CT-1 holds approximately 60 rails.

View Related Product: PRAIL-CT-1 FID: 983

How many rails would this cart hold? PRAIL-CT-1

Answer

The PRAIL-CT-1 holds approximately 60 rails.

View Related Product: PRAIL-CT-1 FID: 646

How many seconds to fully raise CART-1000D-DC-CTD with and without a load? CART-1000D-DC-CTD

Answer

With a load, it takes 18 seconds to fully raise. Without a load, it takes 16 seconds to fully raise.

View Related Product: CART-1000D-DC-CTD FID: 298

How many square feet is the storage building? STOR-96-G-W-1RH

Answer

The STOR-96-G-W-1RH shed is 6' x 9' and 54 square feet.

View Related Product: STOR-96-G-W-1RH FID: 170

How many square foot will a box cover? F-GRID

Answer

Approximately 26 square feet per box.

View Related Product: F-GRID FID: 353

How many strokes does it take to raise LTT-2145? LTT-2145

Answer

It takes 33 strokes to raise LTT-2145.

View Related Product: LTT-2145 FID: 1699

How many strokes of the foot pump must be done to have maximum lifted height ? LDLT-3072

Answer

The table will raise approximately 0.43" per (foot) pump.

View Related Product: LDLT-3072 FID: 283

How many turns does it take to rotate 180°? DCR-RAR-12

Answer

It is approximately 30 turns of the crank for 180° drum rotation.

View Related Product: DCR-RAR-12 FID: 1718

How much 1/4" rope can I put on the WALL-D winch? WALL-D

Answer

The WALL-D can accommodate up to 32 feet of rope.

View Related Product: WALL-D FID: 593

How much concrete is needed to fill? BOLPP-72-6.5

Answer

To technically answer the question it will need 2,722 in cubed of concrete (or 0.06 yd cubed). Which really does not mean much to most people so, for the BOLPPs, I use the following website. This calculation page will break it down depending if they are using pre-mixed bags of concreate or ordering in a truck to do several bollards at the same time. https://www.omnicalculator.com/construction/concrete-cylinder

View Related Product: BOLPP-72-6.5 FID: 671

How much does the top tilt in degrees? WT-2016-FP

Answer

The maximum tilt angle is 40 degrees.

View Related Product: WT-2016-FP FID: 234

How much hydraulic fluid do these units hold? HYD-3HYD-5HYD-10HYD-15

Answer

The Hefti-Lifts hold 2-2.5 quarts of hydraulic fluid.

View Related Product: HYD-3 FID: 261

How much oil does the dock leveler use? EH-6545

Answer

The EH docklevelers use approximately 1 gallon of oil.

View Related Product: EH-6545 FID: 4

How much oil will fit into the hydraulic reservoir?

Answer

The hydraulic reservoir holds 15 gallons of oil.

View Related Product FID: 1

How much oil will fit into the hydraulic reservoir?

Answer

The hydraulic reservoir holds 15 gallons of oil.

View Related Product FID: 755

How much pressure can the IBC-275 be exposed to? IBC-275IBC-330

Answer

The IBC totes do not have a rated pressure capacity.

View Related Product: IBC-275 FID: 813

How much push/pull force is needed for the CA-48-6? CA-48-6

Answer

The starting rotational force for carousels and thin spins is approximately 2% of the load; so, 2% of a 6,000 lb. load would be 120 lbs. of force, and 2% of a 4,000 lb. load would be 80 lbs. of force.

View Related Product: CA-48-6 FID: 378

How much space is there between the front wheels of model CART-600-D-FR? CART-600-D-FR

Answer

The space between the front wheels is 20".

View Related Product: CART-600-D-FR FID: 288

How much weight can each storage level hold? How far are the bins from outside to the pole? PBIN-19

Answer

The capacity levels from bottom to top are: Lower bin 75 lbs., 60lbs., 50 lbs. and the top bin 3 lbs. From the inside pole to the outside of the bins is 9-13/16".

View Related Product: PBIN-19 FID: 1050

How noisy is the PEL? PEL-88PEL-100PEL400

Answer

The Steel units (PEL88, PEL100, PEL400) measure about 63 dB at a distance of 1 foot from the motor enclosure. At 3 feet the level drops to about 59 dB. The units are at least this quiet when rolling too. The Aluminum units are noisier, and would have to be measured on an individual basis.

View Related Product: PEL-88 FID: 260

How should I install the EB-1? EB-1

Answer

There are no mounting holes on the EB-1. A variety of adhesives, or mounting hardware can be used.

View Related Product: EB-1 FID: 966

How tall can it reach? HYD-15

Answer

Overall height is 79-3/8". Maximum height is 53". Maximum travel distance is 49".

View Related Product: HYD-15 FID: 261

How thick are the "walls' on the HPRO-48-36-4? HPRO-36-24-4HPRO-48-24-4HPRO-36-36-4HPRO-48-36-4HPRO-36-42-4HPRO-48-42-4HPRO-60-42-4HPRO-72-42-4

Answer

The HPRO is made from ASTM-A-36 metal and has a wall thickness of 0.120". (We use 4" schedule-10 pipe to build these.) This is the same for all of our 4-1/2" diameter HPROs.

View Related Product: HPRO-36-24-4 FID: 692

How thick are the forks on the EPT-2745-45? EPT-2745-45

Answer

The forks are 2-3/4 inches thick at the thickest point.

View Related Product: EPT-2745-45 FID: 1432

How thick are the forks? Will they fit low profile pallets? HYD-10-EP

Answer

The inside width of the forks is 4-3/8". The overall fork width is 21-3/4". The usable length is 40". The fork thickness is 0.184" and the fork height is 2-3/8".

View Related Product: HYD-10-EP FID: 261

How thick is the steel on the door track protector for model DSP-WF-48-BRL-YL? DSP-WF-48-BRL-YL

Answer

The steel is 3/16" thick.

View Related Product: DSP-WF-48-BRL-YL FID: 739

How thick is the strapping? ST-12-16X6-BL

Answer

The strapping is 0.024" thick.

View Related Product: ST-12-16X6-BL FID: 415

How thick is the top plate on the lift? MOTO-LIFT-1100

Answer

The top plate of the MOTO-LIFT-1100 is 7/32".

View Related Product: MOTO-LIFT-1100 FID: 204

How thick is the wall of the bollard? BOL-SS-36-4.5BOL-SS-42-4.5

Answer

The stainless steel bollards are 4" sch-10 pipe, 12" wall thickness.

View Related Product: BOL-SS-36-4.5 FID: 683

How thick should my dock seal be? D-150-10D-150-11D-150-12D-150-13D-150-14-D-150-15D-150-16D-150-17D-150-18+2 more

Answer

Your dock seal depth is determined by the slope of your approach and the dock bumper thickness. Level approaches typically have 4-1/2" thick dock bumpers, and a 9" to 10" thick seal. When installed, your dock seal should extend 4" to 5" past the face of your dock bumpers so that there is 4" to 5" of pad compression when a truck is docked. An inclined or declined approach will require sloped side pads to compensate for the approach angle. A survey sheet is required to determine the proper pad slope.

View Related Product: D-150-10 FID: 19

How well do these lock systems operate in cold, freezing weather elements? I have a customer that is based in MN. TL-100-F-S

Answer

We suggest using the low temp oil in freezing climates.

View Related Product: TL-100-F-S FID: 6

How wide does mouth open on the PAL-16? PAL-16

Answer

5" jaw opening.

View Related Product: PAL-16 FID: 104

How wide is the banding, and how thick is it for model ST-12-9X8-B? ST-12-9X8-B

Answer

For ST-12-9X8-B, the banding is 1/2" wide, and 0.023" thick.

View Related Product: ST-12-9X8-B FID: 418

I am interested in the floor mounted JIB. I have concrete where I want to install it. Must we pour a new foundation? JIB-FM-3JIB-FM-6JIB-FM-10JIB-FM-20JIB-FM-40

Answer

Because we do not know the condition and strength of the users concrete, pouring a new foundation is the only way we can guarantee the unit will not fail. We can only recommend installing per the instructions in the owners manual. Normal use of the jib causes vibrations that could potentially loosen a wedge anchor. We spec out J-anchors for use in new concrete.

View Related Product: JIB-FM-3 FID: 529

I am interested in the multi station JIB. I have concrete where I want to install it. Must we pour a new foundation? JIB-P-10-6-6JIB-P-10-6-8JIB-P-10-6-10JIB-P-10-8-6JIB-P-10-8-8JIB-P-10-8-10JIB-P-10-10-6JIB-P-10-10-8+2 more

Answer

View Related Product: JIB-P-10-6-6 FID: 533

I am interested in the paper dispenser stand. Is there a serrated blade for cutting the paper? PDS-2-24PDS-2-30PDS-2-36PDS-2-48PDS-3-24PDS-3-30PDS-3-36PDS-3-48

Answer

The paper dispenser stands have a straight edge. There is not a serrated blade on them.

View Related Product: PDS-2-24 FID: 430

I am interested in the STAND-H - do these ship with the hex wrench included? STAND-H

Answer

Yes, the hex wrench is included.

View Related Product: STAND-H FID: 232

I am looking at the PST-PTDS-E. Is there a brake with the PTDS? PST-PTDS-E

Answer

The PST-PTDS includes an electromagnetic disc brake with automatic dead-man feature that activates when the user releases the handle.
(The PST-PTDS can be found under the options tab)

View Related Product: PST-PTDS-E FID: 203

I am looking at the SPT-3672. What is the mounting hole pattern and bracket size of the default casters? SPT

Answer

The SPT utilizes a bull dog caster plate. It will accept caster pads that are 4" wide x 4-1/2" long x 3/16" thick.

View Related Product: SPT FID: 946

I am looking for the dimensions of the adjustable legs. I want to be sure it can straddle a pallet. S-101-AA-DM

Answer

The inside dimensions of the adjustable legs are 40" x 50".

View Related Product: S-101-AA-DM FID: 253

I am looking for the safety factor on the magnetic lifter. ASME uses a 3:1 but I didn't see that. ML-6

Answer

The safety factor on the magnetic lifters depends on the material thickness of the plate.

View Related Product: ML-6 FID: 598

I am looking to keep this truck under a deck. It will be mostly, but not 100%, protected from the elements. Is there any reason why this would not be a good choice to be kept outside? PPT-2-41PPT-2-42PPT-3-61PPT-3-62

Answer

The platform truck could be kept outside, however, there may be some corrosion of the hardware from exposure to the elements.

View Related Product: PPT-2-41 FID: 961

I am looking to take my PST up and down a slope. What is the maximum incline a PST can safely travel on? PST

Answer

Maximum of a 4 degree angle incline.

View Related Product: PST FID: 203

I have fiber drums. Will this work? HDC-905-IDC/460VHDC-905-HC/460VHDC-905-IDC/230VHDC-905-HC/230VHDC-905-IDC/208VHDC-905-HC/208V

Answer

Yes, fiber drums can be used with the drum crusher.

View Related Product: HDC-905-IDC/460V FID: 755

I have to raise the forks up 68" on the SNM-90-FF-27. How high will the mast be at that point? SNM-90-FF-27

Answer

If the forks are at 68", the mast will be at 98" high.

View Related Product: SNM-90-FF-27 FID: 251

I need a 50hz 3p/400 motor for my scissor lift table. Is this available as an option? EHLT

Answer

Our standard 60 Hz 3 Phase 460 VAC motor will cover 50Hz 3 Phase 400 VAC.

View Related Product: EHLT FID: 196

I planning on mounting this at the rear of a 12' flat bed, and see that this is a 1 hp motor for the 12V DC - will that run off a standard truck battery ? WTJ-20-4-DC

Answer

Yes, the WTJ-20-4-DC will run off a standard 12V truck battery.

View Related Product: WTJ-20-4-DC FID: 582

I purchased the ASP-36. Can I add a handrail? ASP-36

Answer

Yes! There is a handrail option that you can install. Please contact your sales associate for details.

View Related Product: ASP-36 FID: 639

I purchased the DCT-85 and would like to replace the chain with the handle option. Does that have to be factory installed? DCT-R-HC

Answer

The DCT-R-HC can be retrofitted.

I purchased the PEL-88. Can I add the push button control myself? PEL-2PB? PEL-88PEL-100PEL-400-57PEL-400-72PEL-88-APEL-100-APEL-88-ACPEL-400-AC+3 more

Answer

Yes, the PEL-2PB option can be installed in the field.

View Related Product: PEL-88 FID: 260

I saw the pipe size this fits is 1-1/4". That translates into 1-5/8" outside diameter correct? HRAIL-CON

Answer

No, the outside diameter of the pipe this connector fits on is 1-1/4".

View Related Product: HRAIL-CON FID: 749

I see from the picture that the wheels are plastic. Can the plastic wheels really hold up to lots of heavy use? APPL-1200-66

Answer

The plastic wheels can hold up to 1,200 lbs.

View Related Product: APPL-1200-66 FID: 1000

I see it mentions industrial uses and "harsh" environments - we're looking to install something like this outdoors, would you recommend that? PARK-P-108-FD

Answer

Yes, these are suited for both indoor and outdoor uses.

View Related Product: PARK-P-108-FD FID: 677

I see that the female end pieces are sold separately. Does this kit just contain the center 5 pieces? And I would have to order the female pieces to complete the installation separately? RSH-120-36-A

Answer

The RSH-120-36-A will come with everything shown in the drawing. The five middle sections & two female ends. We sell both pre-sized kits, & individual parts so customers can do custom lengths if that fits their applications better.

View Related Product: RSH-120-36-A FID: 110

I see that you do custom designs on these ladders. What is the maximum height? ATS-68ATS-56

Answer

The ATS-68 (68 degree step angle) can be designed up to 204" top step height.
The ATS-56 (56 degree step angle) can be designed up to 168" top step height.
Please contact a sales associate for details.

View Related Product: ATS-68 FID: 612

I see the pole diameter is 2 3/4". Is that a solid pole or hollow? CRCRFCRP

Answer

The carpet pole/rug rams poles are solid.

View Related Product: CR FID: 496

I see this table comes with a foot control. Can I switch it to a hand control? EHLTG-4450-2-36

Answer

Yes, the part number to switch to a hand control would be HH2PB-8-FC-2.

View Related Product: EHLTG-4450-2-36 FID: 208

I see under the options tab the D-TILT. Does that have to be installed at the time I order a hopper? D-TILT

Answer

The D-TILT can be customer/field installed.

View Related Product: D-TILT FID: 449

I understand this is not waterproof, but will the pallet float? PWP-4840

Answer

The presswood pallet does not float.

View Related Product: PWP-4840 FID: 442

I want to install the wire mesh on the square railing. What hardware is needed? WM-48WM-60WM-72WM-84WM-96WM-108-WM-120

Answer

The hardware for the wire mesh to install on the square railing is included.

View Related Product: WM-48 FID: 644

I want to stack BASE-4848 with the NEST-F-4848. Can I stack 3 levels? BASE-4848BASE-6048

Answer

The BASE-4848 and the NEST-F-4848 are internestable and stackable - 2 units high.
For stacking more than 2 units high, please see NEST-106,NEST-210,NEST215 or NEST-230.

View Related Product: BASE-4848 FID: 1108

I want to use the PEL-RR attachment to pick up small spools of wire. How does it hold the spool in place? PEL-RR

Answer

When you turn the crank, the rubber expands and grips the inside of the core. You will then be able to rotate the roll.

View Related Product: PEL-RR FID: 260

I'd like to mount this to the floor. Are there slots in the bottom ring? CA-40-4

Answer

There are mounting slots in the bottom ring of the CA-40-4.

View Related Product: CA-40-4 FID: 378

I'm comparing two pallet trucks with scales. They have the same fork size and same capacity. What is the difference between the PM-2748-SCL-LP and the PM-2748-SCL-LP-E? PM-2748-SCL-LPPM-2748-SCL-LP-E

Answer

The PM-2748-SCL-LP has articulating wheels and a Metler Toledo scale that has multiple programming functions. The PM-2748-SCL-LP-E has a basic scale.

View Related Product: PM-2748-SCL-LP FID: 318

I'm interested in a Fork Truck Boom, but my forks are 8". Are there larger fork pockets? LM-1T-4-24LMOBT-4-24LM-EBT-4-24LM-1T-4-6-24LM-OBT-6-24LM-EBT-6-24LM1T-8-24LM-OBT-8-24+16 more

Answer

We do offer different size fork pockets, see the options table. We also do custom fabrication. Please contact one of our sales associates for assistance.

View Related Product: LM-1T-4-24 FID: 473

I'm interested in adding the 42" forks to the S-2CB-62 stacker. What would the load center be with the longer forks? S-2CB-62

Answer

The S-2CB-42-FK load center would be 21" when installed on the S-2CB-62 stacker.

View Related Product: S-2CB-62 FID: 254

I'm interested in the IBC-TLT. Are the casters swivel? IBC-TLT

Answer

The casters on the IBC-TLT are swivel with brakes.

View Related Product: IBC-TLT FID: 814

I'm interested in the steel safety railing. When using the double socket what is the gap between the two railings? VDKR-P102

Answer

When using the VDKR-P102 socket the distance between the two railings is approximately 1".

View Related Product: VDKR-P102 FID: 642

I'm looking at RDC-1000-5PU. I would like to know how high the drum will be off the ground when tilted horizontally. Can you let me know the height? RDC-1000-5PURDC-1000-5PORDC-1000-5SS

Answer

The height is 17-1/2" from the floor when the drum is in a horizontal position.

View Related Product: RDC-1000-5PU FID: 803

I'm looking at the EOP-440. Is the batter charger a 110V wall charger? EOP-440

Answer

The EOP-440 charger comes with a standard 110V plug.

View Related Product: EOP-440 FID: 355

I'm looking at the HBD-4-60 but need a higher dump height. HBD-2-36HBD-2-48HBD-2-60HBD-4-36HBD-4-48HBD-4-60HBD-6-36HBD-6-48+1 more

Answer

Our engineering team may be able to accommodate your height request. Please contact one of our sales associates to request a modified box dumper quote.

View Related Product: HBD-2-36 FID: 226

I'm looking at the low profile hopper . Does it come with casters? H-25-LDH-50-LDH-100-LDH-150-LDH-25-MDH-50-MDH-100-MDH-150-MD+4 more

Answer

Casters are available for the H- Style Low Profile Hopper. Please see the hopper caster options page for multiple options.

View Related Product: H-25-LD FID: 445

I'm looking at the PM5-2748-TURN. How much space does this unit take for a 90 degree turn? PM5-2748-TURN

Answer

It is the total length of the jack. 61-11/16".

View Related Product: PM5-2748-TURN FID: 319

I'm looking at the self dumping hopper . Does it come with casters? D-25-LDD-33-LDD-50-LDD-75-LDD-100-LDD-150-LDD-200-LDD-250-LD+21 more

Answer

Casters are available for the D- Style Self-Dumping Hopper. Please see the hopper caster options page for multiple options.

View Related Product: D-25-LD FID: 449

I'm not able to find the size of carpet pole I need. Are there additional length poles? CR-108-2CR-108-3CR-120-2CR-120-3CR-144-2CR-144-3CR-48-2CR-48-3+16 more

Answer

The carpet poles are available in lengths of 48" to 144". Please contact a sales associate for details.

View Related Product: CR-108-2 FID: 496

I’m looking for a scale to sit on a lift platform that can transfer the weight over to a PC (so the operator does not have to enter the weight). MU-4848-5-BL

Answer

All our scales are equipped with RS232 port to transfer the data.

View Related Product: MU-4848-5-BL FID: 1404

If I order two bollards, will they be keyed alike? PARK-P-60-FD

Answer

If you buy several units, they will be the same key.

View Related Product: PARK-P-60-FD FID: 677

If we order the V-Groove system, is it possible to keep the gantry on the rail if we only have one person pushing the crane on one side? FHA-2-8-10FHA-2-10-10FHA-2-15-10FHA-4-8-10FHA-4-10-10FHA-4-12-10FHA-4-15-10FHA-6-8-10+2 more

Answer

We recommend pushing the gantry on both sides when re-positioning it. The V-groove options makes moving much easier.

View Related Product: FHA-2-8-10 FID: 1750

Answer

We recommend pushing the gantry on both sides when re-positioning it. The V-groove options makes moving much easier.

View Related Product: FHA-2-8-10 FID: 1753

Answer

We recommend pushing the gantry on both sides when re-positioning it. The V-groove options makes moving much easier.

View Related Product: FHA-2-8-10 FID: 1758

Answer

We recommend pushing the gantry on both sides when re-positioning it. The V-groove options makes moving much easier.

View Related Product: FHA-2-8-10 FID: 1761

If we order the V-Groove system, is it possible to keep the gantry on the rail if we only have one person pushing the crane on one side? AHA-2-8-8AHA-2-10-12AHA-2-15-12AHA-4-8-10AHA-4-10-10AHA-4-12-8AHA-4-15-12AHA-6-8-12+2 more

Answer

We recommend pushing the gantry on both sides when re-positioning it. The V-groove options makes moving much easier.

View Related Product: AHA-2-8-8 FID: 1755

If you order the SWA-50 or SWA-70 with the powered mast option (SWA-5070LP-PMO), will you still receive the standard manual mast with the machine? SWA-5070LP-PMOSWA-5070LP-PMO-RF

Answer

No, the SWA-5070LP-PMO option is factory installed- so it replaces the standard manual mast.

View Related Product: SWA-5070LP-PMO FID: 367

If you order the SWA-54 or SWA-60 with the powered mast option (SWA-5460-PMO), will you still receive the standard manual mast with the machine? SWA-5460-PMOSWA-5460-PMO-RF

Answer

No, the SWA-5460-PMO option is factory installed- so it replaces the standard manual mast.

View Related Product: SWA-5460-PMO FID: 368

In the description is says can be attached to corner with glue, but then says screws needed. Do you need glue or screws? PVC-A-2-BG

Answer

The product itself can be installed with either the glue or screws, it really depends more on the environment. The glue can be used in light contact areas or in areas that a customer cannot, or does not want to, drill holes. The predrilled holes just give the customer the option for a more secure installation, if needed.

View Related Product: PVC-A-2-BG FID: 729

In the event of a power failure (or if the battery becomes disconnected from the motor), what happens to the motor? Does the cargo remain at its current location mid-lift, or will the motor release the cargo? WTJ-20-4-DC

Answer

The load will NOT drop in the event that power is lost to the motor. The AC winch includes an emergency hand crank in the event of power loss.

View Related Product: WTJ-20-4-DC FID: 582

In the options, in regards to the WL-TSP, can it be used with the voltage change WL-3HP? WL-TSP

Answer

No, the WL-TSP needs to be coupled with the standard 6.5 HP motor. It cannot be used with the WL-3HP.

View Related Product: WL-TSP FID: 1

Is this legal for Canada? SH-GUN-P-D

Answer

Yes, ULc listed. The small "c" stands for Canada.

View Related Product: SH-GUN-P-D FID: 419

IS AN ACCORDIAN SKIRT AVAILABLE FOR THE HST-40-ST? HST-40-ST

Answer

Yes, there is an option for an according skirt. Please contact a sales associate for assistance.

View Related Product: HST-40-ST FID: 1437

Is everything on CART-600-D-SS2 stainless steel? CART-600-D-SS2

Answer

All parts are stainless steel, except for the wheels. The wheels are polypropylene.

View Related Product: CART-600-D-SS2 FID: 291

Is HLD-94-10-P-DC a 12v or 24v? HLD-94-10-P-DC

Answer

This has a 24V battery.

View Related Product: HLD-94-10-P-DC FID: 767

Is HLD-94-10-P-DC a rechargeable battery? HLD-94-10-P-DC

Answer

The unit comes with an onboard battery charger.

View Related Product: HLD-94-10-P-DC FID: 767

Is installation hardware included? D-150/650

Answer

Yes, installation hardware is included with the D-150/650 dock seal/shelter combo.

View Related Product: D-150/650 FID: 20

Is it compatible with plastic drums? DRUM-HD

Answer

Yes, they are compatible with plastic drums.

View Related Product: DRUM-HD FID: 839

Is model PLPG-4848-HD UV resistant? PLPG-4848-HD

Answer

PLPG-4848-HD has a UV inhibitor

View Related Product: PLPG-4848-HD FID: 444

Is mounting hardware included with the mirror? CNVX-18

Answer

Yes, mounting hardware is included for model CNVX-18.

View Related Product: CNVX-18 FID: 145

Is MRBR-24 ADA compliant? MRBR-24

Answer

MRBR-24 complies with all applicable U.S. Federal OSHA regulations and U.S. national standards which are incorporated into U.S. national laws and/or regulations.

View Related Product: MRBR-24 FID: 59

Is MTC-PNU-55 55 rated/safe for use in flammable environments? MTC-PNU-55

Answer

We do not represent MTC-PNU-55 55 as being suitable for classified locations. It is pneumatic operation, so it might work some- but the customer is responsible to determine if it is okay for their environment.

View Related Product: MTC-PNU-55 FID: 1500

Is S-CB-118 a class 2 carriage? S-CB-118

Answer

This is not a class 2 carriage.

View Related Product: S-CB-118 FID: 254

Is the 20" fork width dimension inside fork to inside fork? EPT-2048-45-RP

Answer

The 20" dimension is the overall width of the forks, measured from the outsides of the forks.

View Related Product: EPT-2048-45-RP FID: 342

Is the BASE-4848 able to stack with the NEST-F-4848? BASE-4848BASE-6048

Answer

Yes. Both the BASE-4848 and the NEST-F-4848 are internestable and stackable.

View Related Product: BASE-4848 FID: 1108

Is the battery charger UL listed? CART-1000D-DC

Answer

Yes, the battery charger is UL listed.

View Related Product: CART-1000D-DC FID: 297

Is the cap removable to add concrete inside the pipe? Steel Pipe Safety Bollards

Answer

Yes, the black plastic cap is removable.

View Related Product: Steel Pipe Safety Bollards FID: 658

Is the CART-1000-M ANSI certified? CART-1000-M

Answer

Yes, the CART-100-M is ANSI certified.

View Related Product: CART-1000-M FID: 286

Is the CART-1100-SS clean room suitable? CART-1100-SS

Answer

This cart is not compatible with clean room requirements.

View Related Product: CART-1100-SS FID: 291

Is the CBFC-1000-DC CSA compliant? CBFC-1000-DC

Answer

Yes, the CBFC-1000-DC is CSA compliant.

View Related Product: CBFC-1000-DC FID: 587

Is the chain on CDL-2000 lifter coated? CDL-2000

Answer

Yes, the chain is zinc plated.

View Related Product: CDL-2000 FID: 828

Is the conveyor able to make a 90 degree turn? What is the turning radius? EXCNV-S-24-24

Answer

The conveyor is able to make a 90 degree turn. The turning radius is around 1m.

View Related Product: EXCNV-S-24-24 FID: 308

Is the DCR-R-815-HC factory installed or can we add it later? DCR-205-8DCR-205-15DCR-R-815-HC

Answer

The DCR-R-815-HC can be retrofitted in the field or factory installed.

View Related Product: DCR-205-8 FID: 770

Is the drum crusher explosive proof? HDC-905-IDC/460VHDC-905-HC/460VHDC-905-IDC/230VHDC-905-HC/230VHDC-905-IDC/208VHDC-905-HC/208V

Answer

No, the HDC units are not explosive proof.

View Related Product: HDC-905-IDC/460V FID: 755

Is the drum crusher spark resistant? HDC-905-IDC/460VHDC-905-HC/460VHDC-905-IDC/230VHDC-905-HC/230VHDC-905-IDC/208VHDC-905-HC/208V

Answer

No, the HDC units are not spark resistant.

View Related Product: HDC-905-IDC/460V FID: 755

Is the EHU-2 CSA compliant? EHU-2

Answer

No. The EHU-2 is not CSA compliant.

View Related Product: EHU-2 FID: 207

Is the entire unit plastic including the yellow handle and frame? PDH-1624

Answer

The blue deck and wheels are plastic. The yellow handle and frame are steel.

View Related Product: PDH-1624 FID: 1039

Is the F-CRATE stackable? If yes, how many high? F-CRATE

Answer

Yes. 3 units high.

View Related Product: F-CRATE FID: 1131

Is the FM-BAR hollow or solid steel? FM-BAR

Answer

The FM-BAR is hollow.

View Related Product: FM-BAR FID: 5

Is the frame on the PRTD series welded or bolted together? PRTD-10-42-19

Answer

The frame is welded together.

View Related Product: PRTD-10-42-19 FID: 1068

Is the handle removable? DESK-M

Answer

Yes, the handle is removable.

View Related Product: DESK-M FID: 358

Is the hardware for the cantilever racking metric? HU-CHDU-CHB-CHSA-CHIA-C

Answer

Yes, the hardware for the cantilever racking is metric.

View Related Product: HU-C FID: 1094

Is the hardware for the cantilever racking metric? SU-CSDU-CSB-CSSA-CSIA-C

Answer

Yes, the hardware for the cantilever racking is metric.

View Related Product: SU-C FID: 1092

Is the hardware for the cantilever racking metric? MU-CMDU-CMB-CMSA-CMIA-C

Answer

Yes, the hardware for the cantilever racking is metric.

View Related Product: MU-C FID: 1093

Is the hardware included for the locking floor bracket? SSG-9SSG-11

Answer

The floor bracket has mounting holes that accommodate 1/4" hardware, which is not included.

View Related Product: SSG-9 FID: 11

Is the hardware included with the bollard plate? BPL-EAP-R-3-8X8

Answer

No, hardware is not included with the BPL-EAP-R-3-8x8

View Related Product: BPL-EAP-R-3-8X8 FID: 1697

Is the hydraulic oil food grade? CART-1750-PSS

Answer

No food grade oil does not come standard with the cart. Food grade oil is an option. Please contact a sales associate for assistance.

View Related Product: CART-1750-PSS FID: 290

Is the load capacity the same for the fold-down 21.5" extended nose as it is for the regular 9" solid nose? HTWL-600-PNHTWL-800-HR

Answer

Yes , load capacity is the same.

View Related Product: HTWL-600-PN FID: 1001

Is the model D-HEAD-1 "Non-Sparking" or not Non-sparking? D-HEAD-1

Answer

The model is NOT "Non-Sparking".

View Related Product: D-HEAD-1 FID: 849

Is the model RT-MS-62-AF compatible with the following accessories as well: RT-EPT-DBH, RT-EPT-MLH and RT-EPT-SDG? RT-MS-62-AF

Answer

Yes! The accessories work with the manual rough terrain stacker.

View Related Product: RT-MS-62-AF FID: 1509

Is the mounting hardware included?

Answer

No, the mounting hardware is not included.

View Related Product FID: 1483

Is the MWP-330-DC-SS CSA compliant? MWP-330-dc-ss

Answer

No, MWP-330-DC-SS is not CSA or UL compliant.

View Related Product: MWP-330-dc-ss FID: 265

Is the orientation of the hitch E-TUG-HD-SLH relevant? E-TUG-10E-TUG-20E-TUG-30

Answer

Yes. The hitch is designed for horizontal pulling only.

View Related Product: E-TUG-10 FID: 1019

Is the PAIL-PAL non-sparking? PAIL-PAL

Answer

The PAIL-PAL is NOT non-sparking.

View Related Product: PAIL-PAL FID: 907

Is the platform removable so the unit can be used just with the forks? HYD-10

Answer

Yes platform is removable on the following models HYD-10, HYD-10-AIR, HYD-10-AS, HYD-10-DA,SS, HYD-10-DC, HYD-10-DC,SS HYD-10-EP.
Lift can be used with or without platform (with forks).

View Related Product: HYD-10 FID: 261

Is the PLPS-4840-9L pallet FM approved? PLPS-4840-9L

Answer

No, it is not FM approved.

View Related Product: PLPS-4840-9L FID: 444

Is the POS-1830 waterproof? POS-1830

Answer

Yes. Polyethylene dollies will not warp, dent, or splinter like wood dollies.

View Related Product: POS-1830 FID: 1038

Is the power cord included with the AC powered Tilt Masters? TM-AC and TMS-AC models

Answer

The power cord is not included. For connection to a 115V wall receptacle, the use of a minimum 14 gauge power cord not exceeding 25 feet in length is recommended.

View Related Product: TM-AC and TMS-AC models FID: 221

Is the PPC-20 chain welded? PPC-20

Answer

Each link is welded.

View Related Product: PPC-20 FID: 104

Is the RWC-8-ERGO wheel chock drilled for bolting bracket/handle on? RWC-8-ERGO

Answer

No, the RWC-8 chock is not pre-drilled.

View Related Product: RWC-8-ERGO FID: 84

Is the scale calibrated before it is shipped? SCALE-S-CFT-44-5KSCALE-S-CFT-55-5KSCALE-S-CFT-44-10KSCALE-S-CFT-55-10K

Answer

Yes the scales are calibrated before shipping. There is no need to set the GEO code after receiving. The scales are self adjusting.

View Related Product: SCALE-S-CFT-44-5K FID: 389

Is the scale suitable for wash-down? And can it measure as little as 1/2 lb.? DRUM-SCLGDRUM-55FP

Answer

Yes, the scale is suitable for a wash-down environment, and yes, it can measure as little as 1/2 lb.

View Related Product: DRUM-SCLG FID: 786

Is the speed that the barrel tumbles adjustable? DRM-H-3055

Answer

Yes, the drum speed is adjustable.
30 gallon drum speed can be adjusted from 8 to 25 RPM's.
55 gallon drum speed can be adjusted from 7 to 20 RPM's.

View Related Product: DRM-H-3055 FID: 1687

Is the TW-38 ISO certified? TW-38

Answer

Yes.

View Related Product: TW-38 FID: 862

Is the unit CART-1000-SS2 clean room ISO 14644 certified? CART-1000-SS2

Answer

This unit has hydraulic oil in the cylinder, so it will not qualify for clean room environment.

View Related Product: CART-1000-SS2 FID: 291

Is the vertical screw on LJ-17 solid or hollow? LJ-17

Answer

The vertical screw on LJ-17 is solid.

View Related Product: LJ-17 FID: 1061

Is the Vestil VB 12 made of high density polyethylene or low density polyethylene? VB-6VB-8VB-10VB-12VB-8-10VB-9R

Answer

The VB series are made of MDPE - Medium-density polyethylene.

View Related Product: VB-6 FID: 712

Is the VS-ECH-5-1PH CSA- compliant? VS-ECH-5-1PH

Answer

No. The VS-ECH-5-1PH is not UL or CSA approved.

View Related Product: VS-ECH-5-1PH FID: 549

Is there a foot control option for the VHPS-2200-AA? VHPS-2200-AA

Answer

VHPS-2200-AA is BOTH a hand and foot operated lift.

View Related Product: VHPS-2200-AA FID: 246

Is there a high cycle option for the HDC-900-GPT? HDC-900-GPT

Answer

The standard unit comes as a high cycle unit from the factory.

View Related Product: HDC-900-GPT FID: 756

Is there a key to lock the base plate so someone cannot come along and remove the bollard? BOL-RF-36-5.5

Answer

No, but you can use your own padlock and key to secure.

View Related Product: BOL-RF-36-5.5 FID: 666

Is there a lid for the P-HOP-1.5? P-HOP-1.5

Answer

Yes, the PLID-H-150 will work with this hopper.

View Related Product: P-HOP-1.5 FID: 450

Is there a maintenance schedule for PTB-19? PTB-19

Answer

Maintenance should be performed every 6 months.

View Related Product: PTB-19 FID: 376

Is there a published recommended minimum aisle to turn these units within when handling a 48" long load? TMS-20-DC

Answer

Approximate
Turning Radius = 64".
Aisle Width = 120".

View Related Product: TMS-20-DC FID: 221

Is there a ramp we can use with the low profile scissor lift table? EHLTX

Answer

Yes we have approach ramps which are a great addition to the low profile scissor lift tables. You'll find that information under the options tab of the EHLTX information page. The ARX-3639-3 can be used with one and two thousand lb. capacity tables. For the 3 and 3.5 lb. capacity the ARX-3654-4 is the perfect transition from the pallet truck to the table.

View Related Product: EHLTX FID: 206

Is there a release lever on the sweeper? HDMS-36HDMS-48HDMS-60HDMS-72

Answer

No, there is not a release lever on the magnetic sweeper.

View Related Product: HDMS-36 FID: 139

Is there a safety harness with the work platform? WP-3636WP-3648WP-4848WP-4848-FFWP-3636-84BWP-3648-84BWP-4848-84BWP-4848-84B+5 more

Answer

The lanyard with safety harness is available in sizes small through xxx-large. Please see the options tab on the work platform information page.

View Related Product: WP-3636 FID: 470

Is there a spec sheet that shows the number and type of bolts it has? We lost the bolts and need to get new ones. DCR-110-55

Answer

P/N: 11052 X 4 Description: Bolt, Hex Head Size: 5/16" - 18 x 5/8" P/N: 16309 X 2 Description: Bolt, Hex Head Size: 5/8" - 18 x 1 - 1/2" P/N: 11113 X 2 Description: Bolt, Hex Head Size: 3/8" - 16 x 2 - 1/2"

View Related Product: DCR-110-55 FID: 784

Is there a suggested maximum speed for the trailer? H-TRAIL

Answer

Maximum speed for road travel is 45 MPH.

View Related Product: H-TRAIL FID: 589

Is there a temporary gate for this fence? HRAIL-9072

Answer

We do not have a gate for this barrier system.

View Related Product: HRAIL-9072 FID: 749

Is there an air powered option for this table? EHLTT

Answer

For air powered option, the part number would be ROTARY-DA-HHPB.

View Related Product: EHLTT FID: 209

Is there an attachment to help raise it higher? AHS-2-10-16

Answer

Yes, we have an option called AHA-KIT that aids in raising the ibeam to the preferred height. AHA-KIT is not to be used in lieu of the lock pins. You must still insert the lock pins once at the desired height.

View Related Product: AHS-2-10-16 FID: 517

Is there an emergency/safety stop in case of hydraulic failure on the CART-PN-1500? CART-PN

Answer

This unit comes with one single lifting assembly. There are no hydraulic hoses in this design and no chance of sudden hydraulic failure. Unit will drift down at very slow pace if there is internal leak and in case of lifting assembly damage it will not lift the table at all.

View Related Product: CART-PN FID: 293

Is there an installation kit, including bolts for the bollards? BOL-RF-36-5.5

Answer

Installation kit is not included.

View Related Product: BOL-RF-36-5.5 FID: 666

Is there an option for a power drive? HYD-ROLL-47-DC

Answer

No, the power traction drive system (PTDS) is not available for the HYD-ROLL-47-DC.

View Related Product: HYD-ROLL-47-DC FID: 1505

Is there an option for a removeable base with this guard? HPRO-60-42-4

Answer

Yes. You can purchase the HPRO-RF-BASE for the HPRO-60-42-4.

View Related Product: HPRO-60-42-4 FID: 692

Is there an option to blow warm air instead of cool air with the air curtain ? ACURT-36ACURT-48ACURT-60ACURT-72ACURT-96ACURT-108ACURT-120

Answer

There is not an option on the air curtain to blow warm air.

View Related Product: ACURT-36 FID: 129

Is there an upgrade for lithium batteries for ULM-EPT-2745-44? ULM-EPT-2745-44

Answer

No, there is no upgrade for lithium batteries for ULM-EPT-2745-44.

View Related Product: ULM-EPT-2745-44 FID: 340

Is this designed to operate without being bolted down? HDC-905-IDC/460VHDC-905-HC/460VHDC-905-IDC/230VHDC-905-HC/230VHDC-905-IDC/208VHDC-905-HC/208V

Answer

Yes, these drum crushers can be used without being bolted down. There are also fork pockets so the drum crusher can be moved. Please see the owners manual for additional information.

View Related Product: HDC-905-IDC/460V FID: 755

Is this item food grade? PAIL-SCR-35-W

Answer

This unit can be used with hot liquids as well as freezer applications.

View Related Product: PAIL-SCR-35-W FID: 915

Is this jack used to support a space after it has been lifted? FJB-16FJB-36FJB-100FJB-150

Answer

These jacks are not meant to be used to lift. Only to hold the load in place.

View Related Product: FJB-16 FID: 1062

Is this light weatherproof for use outside? LL-HD-LED-24LL-HD-LED-40LL-HD-LED-60LL-HD-LED-90

Answer

They heavy duty loading dock light is not intended for use outdoors and is not weatherproof.

View Related Product: LL-HD-LED-24 FID: 67

Is this Non-Magnetic steel such as 304? FLAT-C

Answer

No.

View Related Product: FLAT-C FID: 944

Is this ONE piece, or is the top (dome shape) separate for model BPC-48-5.5? BPC-48-5.5

Answer

It comes in one piece.

View Related Product: BPC-48-5.5 FID: 662

Is this pallet rated for outdoor use/UV stable? PLP2-4840-BLACK

Answer

Yes, these can be used outdoors. We cannot guarantee that the pallet color will not fade after long periods of time exposed to UV rays.

View Related Product: PLP2-4840-BLACK FID: 444

Is this pallet rust resistant? SPL-3636SPL-4048SPL-4248SPL-4848

Answer

Yes; these pallets have a galvanized finish, making them rust resistant.

View Related Product: SPL-3636 FID: 436

Is this product bendable? BS-24

Answer

The rubber can bend, but it is meant to be mounted on a flat surface.

View Related Product: BS-24 FID: 98

Is this product suitable for outdoor use? FEG-E

Answer

No, The FEG-E is made of a foam rubber material. It might last for a short time outside, but it is not designed to withstand the elements.

View Related Product: FEG-E FID: 727

Model VB-8-10 - What are the outside dimensions? VB-8-10

Answer

The outside dimensions are 24" x 24" x 40" H.

View Related Product: VB-8-10 FID: 712

Model: EHN-40-C-AH. I want to know how much air pressure (PSI) it needs to lift equipment. EHN-40-C-AH

Answer

The air pressure requirement is 70 to 90 psi.

View Related Product: EHN-40-C-AH FID: 585

Must the level on the MSJ-10 travel a full stroke to actuate a lift? In other words, if there was limited space for lever vertical travel, could the jack still lift? MSJ-10

Answer

The jack will still lift, albeit, it will lift at a slower rate compared to if the level is getting a full pump/stroke.

View Related Product: MSJ-10 FID: 91

On models MEZZ-KD-88T-93D and MEZZ-KD-88T-93D-A; are we able to use 2 x 6 wood instead of 2 x 4 wood? MEZZ-KD-88T-93DMEZZ-KD-88T-93D-A

Answer

Yes, 2 x 6 wood is an acceptable replacement for 2 x 4 wood on MEZZ-KD-88T-93D and MEZZ-KD-88T-93D-A.

View Related Product: MEZZ-KD-88T-93D FID: 645

On series EHLT-WS-XXXX-PSS, what parts are not stainless steel? EHLT-WS-2436-PSSEHLT-WS-2448-PSSEHLT-WS-4048-PSS

Answer

All parts are stainless steel except the scissor legs (galvanized) and toe guards (aluminum/rubber).

View Related Product: EHLT-WS-2436-PSS FID: 205

On the CART-1000-LD-DC what is the raise and lower time? CART-1000-LD-DC

Answer

The raise time is 15 seconds. The lower time is 13 seconds.

View Related Product: CART-1000-LD-DC FID: 297

On the drawing for the S-118-AA-FR what does "UDL" stand for? S-118-AA-FR

Answer

UDL stands for Uniform Distributed Load - even load across the forks.

View Related Product: S-118-AA-FR FID: 255

On the electric car mover, can the two plates accommodate a 12" tire? ECM-635-75

Answer

Yes, with a minimum of a 4" clearance.

View Related Product: ECM-635-75 FID: 344

On the HDFMS model series, how do you release the metal off of the magnet? HDFMS-36 HDFMS-48 HDFMS-60 HDFMS-7

Answer

The metal that is picked up by the magnet needs to be removed manually by hand.

View Related Product: HDFMS-36 HDFMS-48 HDFMS-60 HDFMS-7 FID: 139

On the magnetic sweeper, how high is the eye hook on the ends of the sweeper? HDFMS-36HDFMS-48HDFMS-60HDFMS-72

Answer

The eyehook that the chain is attached to is 2-3/4" high.

View Related Product: HDFMS-36 FID: 139

On the SY-series aluminum yard ramps, is the steel grating bare steel, painted, or galvanized coated?

Answer

The grating is painted.

View Related Product FID: 29

On your model number HFMS-48, the magnetic pull is 55 pounds. Do you know at what height? HFMS-48

Answer

Maximum of 1" to 2" from the ground.

View Related Product: HFMS-48 FID: 139

On your SSA step stools, what is the diameter of the legs? SSA

Answer

The legs are 3/4" schedule 40 aluminum pipe.

View Related Product: SSA FID: 621

Our access door is 84", ceiling clearance is 103". Will this work for us? SNM-90-AA

Answer

There should be no issue, as mast height is 64" when forks are lowered. Mast overall height when forks are fully raised 90" is 108-1/2".

View Related Product: SNM-90-AA FID: 251

Room ceiling clearance is 103", our load needs to be lifted 80". Will this work for us? SNM-90-AA

Answer

The overall mast height when the forks are raised to 80" is 104", which may interfere with ceiling height.

View Related Product: SNM-90-AA FID: 251

The description of the OPBOL-31 and OPBOL-47 says they are spring loaded, however I do not see springs on the bases? How does it spring back? OPBOL-31OPBOL-47

Answer

The spring action on these units is made possible by a bungee cord in the base.

View Related Product: OPBOL-31 FID: 680

The description states "a padlock maybe added to prevent unauthorized removal". Where does the padlock attach? BOL-RF-BASE

Answer

The padlock goes into the base plate where the lip is with 2 holes are.
The padlock is not included.

View Related Product: BOL-RF-BASE FID: 666

The FLB-D-10 is symmetrical and the hooks on the ends appear to rotate 18+ degrees. Can the beam be used upside down with a load cell on a central hook upwards and the load below from outer hooks? FLB-D-10

Answer

Yes, this product can be used “upside down”, using the center bail to either pick up the load or use it to hang the beam from a hoist to use the outer hooks to lift the load.

View Related Product: FLB-D-10 FID: 477

The shelves on this unit are adjustable. Can I add an additional shelf? PCBS-1836PCBS-2436

Answer

Yes. Additional shelves are available for the PCBS-1836 or the PCBS-2436. Please contact a sales associate for information.

View Related Product: PCBS-1836 FID: 1126

The temperature is very cold, but well above the freezing point, our concern is on the effect of water/ moisture. Will the product absorb water? DIB-96

Answer

The outer layers are made of the similar material as umbrellas with fabric in between.
They are water resistant, but if you submerge the blanket, water will be absorbed through the stitching holes.

View Related Product: DIB-96 FID: 8

The top of the top of the stand has a circular top with cutouts. What are the dimensions of the 8 holes? AWS-50

Answer

The top plate has 6 slots that are 1/2" x 1-7/16". The other two slots are 1/2" x 1".

View Related Product: AWS-50 FID: 256

The wheels on the tugger are foam filled. What material are the front casters? E-TUG-10E-TUG-20E-TUG-30

Answer

The front casters are poly on poly.

View Related Product: E-TUG-10 FID: 1019

This US made drum cover specifies a 25" diameter. Can you verify if this is OD or ID with or without ring closure? DC-TPODC-TPO-B

Answer

The inside diameter including the area that covers bolt/closure measures 24-1/2".
The overall lid/die cut including the overhang measures 25".

View Related Product: DC-TPO FID: 852

We are expecting to crush about 1,500 drums per month. Will this unit work for us? HDC-905-HC/208VHDC-905-HD/230VHDC-905-HD/460V

Answer

Approximately 2,000 drums per month is possible with HDC-905-HC high cycle crusher. Cycle time is approximately 25 seconds.

View Related Product: HDC-905-HC/208V FID: 755

We are going to do two "runs" on the pallet racking. How many uprights do we need? PRTD-10-42-19PRTD-10-42-24PRTD-12-42-19PRTD-12-42-24PRTD-14-42-19PRTD-14-42-24PRTD-16-42-19PRTD-16-42-24+1 more

Answer

For two continuous "runs" on the pallet racking you will need 3 frames (PRTD-XX-XX-XX).

View Related Product: PRTD-10-42-19 FID: 1068

We are in the food industry and are interested in the stainless steel thin spin. Is it designed for washdown? LP-4000T-SSLP-4000T-45-SSLP-4000T-39-SS

Answer

The stainless steel thin spins models LP-4000T-SS,LP-4000T-45-SS and LP-4000T-39-SS are not designed for washdown. Water would collect and pool in the grooves that contain the ball bearings.

View Related Product: LP-4000T-SS FID: 375

We are installing the drop in rails on the 42" posts. What is the dimension from the bottom rail to the floor? GR-F3R-DI-TP42-YL

Answer

The dimension from the floor to the bottom of the lower rail is 2-5/8".

View Related Product: GR-F3R-DI-TP42-YL FID: 655

We are installing the safety railing and using the double socket. VDKR-P102. How much does it add to the length of the safety railings? VDKR-P102

Answer

The VDKR-P102 double socket has approximately 1" in between the two railings.

View Related Product: VDKR-P102 FID: 642

We are interested in adding a top plate to the carousel. Is there an additional mounting fee? CA-18-2CA-24-2CA-24-4CA-30-2CA-30-4CA-36-2CA-36-4CA-40-2+11 more

Answer

There is no mounting fee when adding the base (CA-BASE) or top plate (CA-TP) to one of the carousels (CA).

View Related Product: CA-18-2 FID: 378

We are interested in the AIR-J fork truck jack. If an air compressor is not available can we use a manual pump. AIR-J

Answer

The AIR-J will not operate with the use of a manual pump.

View Related Product: AIR-J FID: 359

We are interested in the drum attachment. Will it work with the S3-43-AA, S3-62-AA, S3-118-AA, S3-125-AA? S3-SDG-RF

Answer

The S3-SDG-RF works with the S3-43-AA (only).

View Related Product: S3-SDG-RF FID: 253

We are interested in the EHLT 1,000 lb. capacity lift table with a table top of 48 x 48. We want to change the voltage to 115 single phase. What is the travel time to the raised height. EHLT-1-43

Answer

For the EHLT-4848-1-43 with a 115 voltage, the raised time to 43" is 15 seconds. 16 seconds to the lowered height of 7".

View Related Product: EHLT-1-43 FID: 196

We are interested in the safety railings. Will we need the VDKR-CON to connect multiple rails? VDKR-2VDKR-3VDKR-4VDKR-5VDKR-6VDKR-7VDKR-8ADKR-2+10 more

Answer

The VDKR-CON can be used with some of the bases. Please note if you are using VDKR-P102, VDKR-W-102, VDKR-BASE, or VDKR-BASE-W the connectors (VDKR-CON) should be excluded.

View Related Product: VDKR-2 FID: 642

We are looking at the AHW-H-1936. What is the "thickness" of the step? AHW

Answer

The material thickness of the step is 14 gauge. The height of the step channel is 1-1/2".

View Related Product: AHW FID: 641

We are looking at the extra platform for the HYD-5-LP. How high is the lip on the platform? HYD-5-LPHYD-5-EP

Answer

The HYD-5-LP platform lip is 3-1/8" high.
The HYD-5-EP platform lip is 5-1/8".

View Related Product: HYD-5-LP FID: 261

We are looking at the light/siren option for the bollard. How long does the light stay on? SPBOL-42-BLSPBOL-BL

Answer

The light and siren option for the spring bollard will continue until the bollard stops vibrating.

View Related Product: SPBOL-42-BL FID: 675

We are looking at the options for the full height pleats and /or guide strips. D-FHFS , D-FHPS. Are these sold individually or as a pair? D-150-XXD-350-XX

Answer

The D-FHFS and the D-FHPS options are priced / sold as a pair, one for each side of the dock door.

View Related Product: D-150-XX FID: 19

We are looking at the V-Groove system. Is it possible to keep the gantry on the rail with one person pushing the crane on one end? FHS-50FHS-2-10FHS-2-15FHS-2-20FHS-4-10FHS-4-15FHS-4-20FHS-6-10+7 more

Answer

The V-Groove option makes moving much easier. We recommend pushing the gantry on both ends when re-positioning it.

View Related Product: FHS-50 FID: 519

We are mounting the EHLT in a pit. Are there lifting eyes to lower the table? EHLT

Answer

Lifting eyes are bolted through the top platform to lower the EHLT into a pit from overhead. Please contact a sales associate for details.

View Related Product: EHLT FID: 196

We have 3 shifts and each shift will be using the dumper. How many dumps per battery charge? JMD-1000-48JMD-1000-60JMD-1000-72

Answer

With normal use, a battery charge will last one shift.

View Related Product: JMD-1000-48 FID: 220

We have a slight incline about 6 degrees and need to lift about 2,000 lbs. with the electric pallet truck. Will that be possible? EPT-2047-30

Answer

The EPT-2047-30 is capable of lifting up to 2,500 lbs. at a 6° incline.

View Related Product: EPT-2047-30 FID: 342

We have both steel and plastic drums. Is there a way we can use this with both types of drums? DRUM-LRTDRUM-LRT-IIDRUM-LRT-DCDRUM-LRT-DC-IIDRUM-LRT-AIRDRUM-LRT-DC-SCL

Answer

Yes. FDA-550-DRUM-LRT-PF (installed in the factory) is an adaptor that can accommodate 55 gallon plastic and fiber drums. The adaptor can be easily removed for use with steel drums.

View Related Product: DRUM-LRT FID: 783

We purchased the work platform and want casters added. Is it possible to add them now? WP-3636WP-3648WP-4848WP-4848-FFWP-3636-84BWP-3648-84BWP-4848-84BWP-4848-84B+5 more

Answer

The options for the work platform include casters, emergency stop button kit, fluorescent tube caddy, and tool tray and can be purchased at any time. Please see the options tab on the work platform information page.

View Related Product: WP-3636 FID: 470

What angle is the boom when it is fully extended? EPFC-CB-15

Answer

When fully extended, the boom is at a 50 degree angle.

View Related Product: EPFC-CB-15 FID: 586

What are dimensions of the base plate and size of bolt holes? ECSPT-2448

Answer

The caster pad is 4 x 4, 182". The bolts are 10 mm.

View Related Product: ECSPT-2448 FID: 1628

What are RWC-8's made of? RWC-8Wheelchocks

Answer

The RWC-8's are made of molded rubber.

View Related Product: RWC-8 FID: 79

What are the 2 pump measurements for each of the 2 speeds of pumps for the CART-800-D-TS? CART-800-D-TS

Answer

High: 2-5/8" per stroke and Low: 3/4" per stroke.

View Related Product: CART-800-D-TS FID: 294

What are the AMPS for the Edge O Dock Levelers? We need a 115V. PE-1572PE-2066PE-2072PE-2566PE-2572PE-3066-PE-3072

Answer

The PE Edge-O-Dock Levelers with a 115V use 12 AMPS.

View Related Product: PE-1572 FID: 5

What are the ball sizes on E-TUG-SABH and E-TUG-HD-DABH? E-TUG-SABHE-TUG-HD-DABH

Answer

Both hitches have a double ball that are 1-7/8" and 2".

View Related Product: E-TUG-SABH FID: 1019

What are the bolt hole size of the top plate for model FL-6? FL-6

Answer

FL-6 mounting plate holes are 1/2" slots.

View Related Product: FL-6 FID: 1063

What are the casters made of on the EHN-60-T? EHN-60-T

Answer

The casters are steel.

View Related Product: EHN-60-T FID: 584

What are the deformation indictors on swivel hook? ELH-60-20

Answer

The deformation indicators measure hook expansion that happens over time and use. This is a safety factor to indicate when the hook should be replaced.

View Related Product: ELH-60-20 FID: 543

What are the dimensions of the "slots" in the dollies? CMD-A-NS-200-4PK

Answer

The dimensions are 2" W x 2-3/4" D x 2-7/8" L (front to back).

View Related Product: CMD-A-NS-200-4PK FID: 1450

What are the dimensions of the "steps"? SPA-2-2236SPA-3-2236SPS-2-2236SPS-3-2236

Answer

The depth of the "step" is 5". The width of the "step" is 17-3/4".

View Related Product: SPA-2-2236 FID: 923

What are the dimensions of the arm where they attached to the upright for SSA-C-18? SSA-C-18

Answer

The arm bracket is 7-1/4" wide and the opening is 2-1/4" where it attaches to the upright.

View Related Product: SSA-C-18 FID: 1092

What are the dimensions of the BAG-12? BAG-12

Answer

The dimensions of the bag when zipped are 9" wide x 17" long x 10" tall.
When the bag is unzipped, the dimensions are 9" wide x 17" long x 11" tall.

View Related Product: BAG-12 FID: 542

What are the dimensions of the caster mounting plate? CART-400-LT

Answer

The caster mounting plate for the CART-400-LT is 4-3/8" x 4-3/8".

View Related Product: CART-400-LT FID: 302

What are the dimensions of the cord cavity? MRHR-39

Answer

1-1/2" wide and 7/16" tall.

View Related Product: MRHR-39 FID: 62

What are the dimensions of the flag pole base? FLP-20-SSFLP-25-SS

Answer

The base is 14" in diameter. There are 6 mounting holes 3/4" that are spaced 6" around the circumference of the base. The mounting holes are 9/16" from the outside edge.

View Related Product: FLP-20-SS FID: 146

What are the dimensions of the hitch pin on the E-TUG-HD-30? E-TUG-HD-30

Answer

The hitch pin is 4-5/8" long, with a 3/4" shaft and a 15/16" head.

View Related Product: E-TUG-HD-30 FID: 1019

What are the dimensions of the mounting plate for the caster? CST-VE-4X2TPR-SWTB

Answer

The mounting plate is 4-1/2" wide x 4" long.

View Related Product: CST-VE-4X2TPR-SWTB FID: 1491

What are the dimensions of the stairs on the stockpicker truck? SPA2-2236SPA3-2236SPS2-2236SPS3-2236

Answer

The stairs on the stockpicker truck are 17-3/4" wide x 5" deep.

View Related Product: SPA2-2236 FID: 923

What are the dimensions of the stairs on the stockpicker truck? SPA2-2840SPA2-2848SPA3-2840SPA3-2848SPS2-2840SPS2-2848SPS3-2840SPS3-2848

Answer

The stairs on the stockpicker truck are 23-3/4" wide x 5" deep.

View Related Product: SPA2-2840 FID: 923

What are the dimensions of the top plate? FJB-150

Answer

The top plate is 3-1/2" x 6".

View Related Product: FJB-150 FID: 1062

What are the dimensions of this bag? BAG-12

Answer

The dimensions are 16"L x 9"W x 10"H.

View Related Product: BAG-12 FID: 541

What are the dimensions on the base on the bollards? PARK-P-60PARK-9-76PARK-P-108

Answer

The base on the PARK-P-60 is 5-3/8" diameter.
The base on the PARK-P-76 is 6-1/2" diameter.
The base on the PARK-P-108 is 8" diameter.

View Related Product: PARK-P-60 FID: 676

What are the dimensions on the lifting hole at the top of the spreader beam? SBRL-25

Answer

The hole at the top of the SBRL-25 is 3" H x 2" W.

View Related Product: SBRL-25 FID: 570

What are the dims for the square tubing on EHN-60-T? EHN-60-T

Answer

Inner dimensions are 2-7/8" x 2-7/8". Outer dimensions are 3-1/8" x 3-1/8".

View Related Product: EHN-60-T FID: 584

What are the dims of the load hook for model EMH-5? How far can it open? EMH-5

Answer

The overall dimensions for the hook are 4” wide X 5” high.

Opening is 1-1/2”.

View Related Product: EMH-5 FID: 554

What are the hand chain and load chain made of? LOW-1GLOW-1PLOW-2GLOW-2PLOW-4GLOW-4PLOW-6GLOW-6P

Answer

The load chain is alloy steel.
The hand chain is carbon steel galvanized.

View Related Product: LOW-1G FID: 539

What are the hot and cold temperature tolerances for the cart? EMHC-2848-1EMHC-2860-1EMHC-2872-1EMHC-3672-1

Answer

The temperature tolerances are from 35° to 90°.

View Related Product: EMHC-2848-1 FID: 1022

What are the increments of the scale reading? EHLT-SCALE

Answer

Scale reads in 1.0 units. Minimum increments are tenths or 0.1 units.

Base reading is 1 lb. and increases by 0.1 from there. Does not extend past 0.1 units.

View Related Product: EHLT-SCALE FID: 1404

What are the inside dimensions of the cart ROL-85? ROL-85

Answer

The inside dimensions are 25" wide x 31" deep x 59" tall

View Related Product: ROL-85 FID: 989

What are the inside dimensions of the platform? HYD-5-LP

Answer

The inside dimensions of the platform are 24" x 36".

View Related Product: HYD-5-LP FID: 261

What are the interior dimensions of the CASE-M? CASE-M

Answer

The interior dimensions are: 20-3/4" x 15-1/2" x 14-1/4".

View Related Product: CASE-M FID: 1132

What are the mounting hole dimensions for the E-TUG-HD-SLH? E-TUG-HD-SLH

Answer

The mounting hole dimensions are as follows:
3-1/2" wide on center x 1-7/8" tall on center.
Holes are 1/2" wide x 7/8" tall.

View Related Product: E-TUG-HD-SLH FID: 1019

What are the raise/lower times for the UNI-4848-4-BLU at 460V 3 phase vs the UNI-4848-4-BLU at 115V 1 phase? UNI-4848-4-BLU-460-3UNI-4848-4-BLU-115-1

Answer

UNI-4848-4-BLU-460-3 = APPROX 16 SEC RAISE AND 12 SEC LOWER @ 460V 3PH AC 2HP 3.1 AMPS

UNI-4848-4-BLU-115-1 = APPROX 41 SEC RAISE AND 12 SEC LOWER @ 115V 1PH AC 3/4 HP 12 AMPS

View Related Product: UNI-4848-4-BLU-460-3 FID: 211

What are the size of the roller bearings on the carousel? CA-18-2CA-24-2CA-24-4CA-30-2CA-30-4CA-36-2CA-36-4CA-40-2+11 more

Answer

The roller bearings are outside diameter: 40mm (~1-9/16"). The radial spacing of the bearings varies depending on the size and capacity of the carousel.

View Related Product: CA-18-2 FID: 378

What are the specs for the mounting holes of the HWG-600? HWG-600

Answer

The hole pattern is 8" apart center of hole to center of hole X 5-3/4" apart center of hole to center of hole. The holes are 1/2" diameter.

View Related Product: HWG-600 FID: 594

What are the standard colors for the accordion skirt? ACC

Answer

The accordion skirt is yellow and black.

View Related Product: ACC FID: 1410

What are the usable dimensions on the base of this cart? PRCT-S-MR

Answer

The usable dimensions of the base of this cart are 12-1/2" x 44".

View Related Product: PRCT-S-MR FID: 971

What caster is the best? CST

Answer

The best "general" caster would be Polyurethane. It is durable, resistance to most chemicals and provides good floor preservation.

View Related Product: CST FID: 143

What caster should I purchase for the hopper? D-25-LDD-33-LDD-50-LDD-75-LDD-100-LDD-150-LDD-200-LDD-250-LD+21 more

Answer

The mold on rubber and poly on steel casters with their soft tread are quiet and ideal for uneven floors. The glass filled nylon casters provide a smoother roll. The semi-steel and ductile steel casters are the most durable. Your sales associate can help you match the capacity and size of the caster kits to your hopper.

View Related Product: D-25-LD FID: 449

What casters are good for rough or uneven terrain? CST-VE-FF SERIES

Answer

The CST-VE-FF SERIES are good for rough or uneven terrain.

View Related Product: CST-VE-FF SERIES FID: 1484

What casters do best in environments with debris? CST-E6

Answer

The F34 series, the F40 series, the FC47 series or the JKING series do well in environments with debris.

View Related Product: CST-E6 FID: 151

What casters do best in environments with debris? CST-E6

Answer

The F34 series with SI tread, the F40 series, the FC47 series or the JKING series do well in environments with debris.

View Related Product: CST-E6 FID: 1470

What coating does the HOP-100 line have? HOP-100

Answer

They are wet painted (electrostatically applied).

View Related Product: HOP-100 FID: 460

What core size will the ROLL-D-DLX accept? ROLL-D-DLX

Answer

Up to 3".

View Related Product: ROLL-D-DLX FID: 431

What decibel is the siren at? Can it be adjusted? ODG-120-BL

Answer

The decibel level is approximately 85 db. The volume is not adjustable.

View Related Product: ODG-120-BL FID: 15

What degree of incline can this handle loaded? RT-S-62-AF

Answer

It can handle an incline of 6°.

View Related Product: RT-S-62-AF FID: 1509

What degree of incline can this unit handle? PMM-1000PMM-3000PMM-3000-15

Answer

Zero. The move master will not perform on any incline.

View Related Product: PMM-1000 FID: 1018

What degree of incline or grade can S-CB-62-SDC handle? S-CB-62-SDC

Answer

S-CB-62-SDC is not made to be used on an incline.

View Related Product: S-CB-62-SDC FID: 793

What degree of incline will the SLNM-63-AA allow? SLNM-63-AA

Answer

0 degree incline.

View Related Product: SLNM-63-AA FID: 248

What diameter jack shaft will this caster NJ-CR fit? NJ-CR

Answer

NJ-CR caster has a 2-3/16" diameter stem, so any jack shaft that can fit that diameter should work.

View Related Product: NJ-CR FID: 89

What do the fork extensions taper down to?

Answer

The FE-4 series, FE-5 series, and FE-6 series all use cast tips that are eight inches (8") long, and taper to three and a half inches (3 ½”). (The tip has a radius on each side, so this measurement starts at the points where the radii start.)

View Related Product FID: 486

What dock seal do I need? D-150-10D-150-11D-150-12D-150-13D-150-14-D-150-15D-150-16D-150-17D-150-18+2 more

Answer

Loading docks are not all the same bumper projection, dock height, approach, door opening size, wall construction, access required to the rear of the trailer, trailer sizes being service as well as several other questions are key factors when designing a dock. For this reason there is no simple answer to this question. On our site there are several tools to help. You can call us during business hours, fill out an RFQ, or submit the dock seal survey on the dock seal page and we will help you with a dock seal fit to match your needs.

View Related Product: D-150-10 FID: 19

What does "MD" mean on the hopper? H-25-LDH-50-LDH-100-LDH-150-LDH-25-MDH-50-MDH-100-MDH-150-MD+4 more

Answer

LD (light duty) 12 gauge steel, 2,000 lb. capacity.
MD (medium duty) 10 gauge steel, 4,000 lb. capacity.
HD (heavy duty) 8 gauge steel, 6,000 lb. capacity.

View Related Product: H-25-LD FID: 445

What does the "LD" mean on the hopper? D-25-LDD-33-LDD-50-LDD-75-LDD-100-LDD-150-LDD-200-LDD-250-LD+21 more

Answer

LD is "light duty" 12 gauge steel, 2,000 lb. capacity.
MD is "medium duty" 10 gauge steel, 4,000 lb. capacity.
HD is "heavy duty" 8 gauge steel , 6,000 lb. capacity.

View Related Product: D-25-LD FID: 449

What does uniform round capacity mean? ML-2ML6ML-12ML-22

Answer

Uniform round capacity is the total capacity of the unit when lifting round steel. Because there is less surface contact with a round pipe the capacity is depleted.

View Related Product: ML-2 FID: 598

What force is required to begin pushing/moving CART-1000D-DC when it is loaded? CART-1000D-DC

Answer

70 lbs. of force is required to begin pushing/moving while it is loaded.

View Related Product: CART-1000D-DC FID: 297

What gauge is the steel on the bottom panel of the cart? PRCT-S-MR

Answer

The steel on the bottom panel is 9 gauge.

View Related Product: PRCT-S-MR FID: 971

What gauge is the top plate? DIE-2430-36DIE-2430-48DIE-2430-60DIE-2430-36-CDIE-2430-48-CDIE-2430-60-CDIE-2430-DC-C

Answer

The top plate is 1/4" thick.

View Related Product: DIE-2430-36 FID: 279

What gauge is this? E-TRK-10-GY-10PK

Answer

The E-TRK-1-GY-10PK is 12 gauge.

View Related Product: E-TRK-10-GY-10PK FID: 1773

What gauge of steel is used for these cabinets? CYL-H

Answer

14 gauge steel.

View Related Product: CYL-H FID: 891

What gauge steel are the gates made of? SLG-6SLG-8SLG-10

Answer

The safety gates are made with 16 gauge steel.

View Related Product: SLG-6 FID: 10

What gauge steel is the bollard for PARK-P-76? PARK-P-76

Answer

The bollard is gauge 14 steel.

View Related Product: PARK-P-76 FID: 676

What gauge steel is the DSG-48? DSG-48

Answer

The DSG-48 is 12 gauge steel.

View Related Product: DSG-48 FID: 691

What gauge steel is the storage building? STOR-96-G-1RHSTOR-912-G-W-1RH

Answer

The STOR-96-G-1RH and STOR-912-G-W-1RH are constructed of 22 gauge corrugated steel siding.

View Related Product: STOR-96-G-1RH FID: 170

What gauge steel is used for these?

Answer

These are made with 8 gauge steel.

View Related Product FID: 1726

What grade can the ALL-T-1-GPT-ST-L climb when loaded? ALL-T-1-GPT-ST-L

Answer

The pallet truck will climb a 12 degree incline.

View Related Product: ALL-T-1-GPT-ST-L FID: 336

What grade can the pallet truck be climbed with 2,000 lbs.? ALL-T-2-GPTALL-T-4-GPT

Answer

The standard 2,000 lb. capacity unit will climb a 21% grade, or a maximum of 12°.

View Related Product: ALL-T-2-GPT FID: 336

What grade is the steel on the chain? BOL-CHAIN

Answer

The steel grade is galv G-30.

View Related Product: BOL-CHAIN FID: 670

What grade is the steel? VDKR-2VDKR-3VDKR-4VDKR-5VDKR-6VDKR-7VDKR-8ADKR-2+10 more

Answer

The VDKR steel is Grade B.

View Related Product: VDKR-2 FID: 642

What grade of stainless is this? PTB-32

Answer

These are plated steel, not stainless.

View Related Product: PTB-32 FID: 376

What grade stainless steel is the FL-ADJ-46-SS? FL-ADJ-46-SSFL-ADJ-810-SS

Answer

The FL-ADJ-46-SS and the FL-ADJ-810-SS are composed of 304 grade Stainless Steel.

View Related Product: FL-ADJ-46-SS FID: 1064

What grade stainless steel is the workmate stand? AHW-L-1924-SSAHW-L-2424-SSAHW-L-1936AHW-L-2436-SSAHW-L-1948-SSAHW-L-2448-SSAHW-L-2460-SSAHW-L-2472-SS+10 more

Answer

The adjustable work mate stands are constructed of 304 grade stainless steel.

View Related Product: AHW-L-1924-SS FID: 1088

What grease type should be used for PTB-19? PTB-19

Answer

NLGI 1 or NLGI 2- both will work.

View Related Product: PTB-19 FID: 376

What hardware is used with the rack guard? RRG-12-4-YLRRG-12-6-YLRRG-18-4-YLRRG-18-6-YLRRG-24-4-YLRRG-24-6-YL

Answer

The holes are 9/16" and 1/2" hardware is recommended. Vestil part number AS-124 would work well.

View Related Product: RRG-12-4-YL FID: 1738

What is the length dimension of a BC-1 from the I-beam clamping point to the bottom of the clamp? BC-1

Answer

The dimension is dependent on the width of beam that it is installed on. Here are some measurements as reference.
Closed end of range 6". In the middle of its range 5". Open end of range 4".

View Related Product: BC-1 FID: 536

What is SWA-60-AW-SCL accuracy ratio? SWA-60-AW-SCL

Answer

The accuracy ratio is 0.1% of the applied load.

View Related Product: SWA-60-AW-SCL FID: 370

What is the 24" load center rating on the S-62-AA? S-62-AA

Answer

1,300 lbs. at 24" load center.

View Related Product: S-62-AA FID: 252

What is the 24" load center rating on the SL-63-AA? SL-63-AA

Answer

1,300 lbs. at 24" load center.

View Related Product: SL-63-AA FID: 250

What is the capacity rating on the FL-LK-SMR-L and the FL-LK-SMR-R ? FL-LK-SMR-LFL-LKSMR-R

Answer

The locking capacity is 2,000 lbs.

View Related Product: FL-LK-SMR-L FID: 1066

What is the minimum weight that the SC-6, scale can register? SC-6

Answer

The minimum weight is 44.1 lbs.

View Related Product: SC-6 FID: 576

What is the tensile strength listed for a model number AS-344? AS-344

Answer

The tensile strength is 400MPa.

View Related Product: AS-344 FID: 1442

What is the actual length before being buried in concrete? BOLPP-48-4.5

Answer

Above ground height: 48-1/2". Actual dims are 12-5/8" L x 12-5/8" W x 58-1/2" H.

View Related Product: BOLPP-48-4.5 FID: 671

What is the actual length before being buried in concrete? BOLPP-48-4.5

Answer

Above ground height: 48-1/2". Actual dims are 12-5/8" L x 12-5/8" W x 58-1/2" H.

View Related Product: BOLPP-48-4.5 FID: 671

What is the adjustment range for E-TUG-ADSH? E-TUG-ADSH

Answer

The E-TUG-ADSH adjustment range is from 18-1/2" to 26".

View Related Product: E-TUG-ADSH FID: 1019

What is the amp draw for SWA-60-AW? SWA-60-AW

Answer

The amp draw is 15 AMPS.

View Related Product: SWA-60-AW FID: 370

What is the Amp draw for the EHU-3? EHU-3

Answer

The draw is 18.5 Amps.

View Related Product: EHU-3 FID: 207

What is the amp draw of the HDC-905-IDC/230V? HDC-905-IDC/230V

Answer

If set up for operation on 230V, single-phase, the motor nameplate full-load current is 12.8 amps.
If set up for operation on 230V, three-phase, the motor nameplate full-load current is 16.8 amps.

View Related Product: HDC-905-IDC/230V FID: 755

What is the amp draw of the hydraulic system on CART-1000-DC? CART-1000-DC

Answer

The amp draw is 148 amps with a load, and 54 amps without a load.

View Related Product: CART-1000-DC FID: 297

What is the amp draw on DRLT-CB-54-MDPL l when recharging? DRLT-CB-54-MDPL

Answer

We use 5 amp charger for charging the battery.

View Related Product: DRLT-CB-54-MDPL FID: 1630

What is the Amp draw or Watts for model EAH-3672-MT? EAH-3672-MT

Answer

The amp draw for EAH-3672-MT is 4.5 amps.

View Related Product: EAH-3672-MT FID: 365

What is the AMP range for the HDC-905-IDC/460V? HDC-905-IDC/460V

Answer

The 460V 3 phase full - load current is 9.5 AMPS.

View Related Product: HDC-905-IDC/460V FID: 755

What is the amp/hr. rating for the EPT-2748-45 with the lead acid battery ? EPT-2748-45

Answer

AMP rating is 75 AH.

View Related Product: EPT-2748-45 FID: 342

What is the amp/hr. rating for the EPT-2748-45-AGM? EPT-2748-45-AGM

Answer

AMP rating is 220 AH.

View Related Product: EPT-2748-45-AGM FID: 342

What is the amperage of the battery chargers? CART-40-10-DC

Answer

The battery charger is 115V. 3.1 AMPS.

View Related Product: CART-40-10-DC FID: 296

What is the angle of the opening angle of the door? 90 or 180 degrees? HBD-GATE

Answer

The gate will open all the way back to the perimeter guard side of HBD unit.

View Related Product: HBD-GATE FID: 226

What is the anti-corrosion treatment on the PPC chains? PPC-20PPC-40

Answer

The PPC chains are galvanized.

View Related Product: PPC-20 FID: 104

What is the approximate speed this foot pump table rises? CART-2000-3240-FP

Answer

It has a two-speed, auto-shifting, manual foot pump. Under low pressure, it will be about 20 pumps to raise the table. Under high pressure it will be about 56 pumps to raise the table.

View Related Product: CART-2000-3240-FP FID: 294

What is the arch size, speed/minute, strapping size(s)? ASM-3123

Answer

Fits 16" diameter roll, strapping size 1/2", 23 1/8"L x 48 3/8"W x 58"H.

View Related Product: ASM-3123 FID: 413

What is the battery charge time for the EPT-2745-33 pallet truck? EPT-2745-33

Answer

The charge time is 3-4 hours.

View Related Product: EPT-2745-33 FID: 1432

What is the battery life for continuous use?

Answer

The battery life for continuous use of the EPT-2745-33 is 2-2.5 hours.

View Related Product FID: 1432

What is the battery life of the MWP-500-DC? MWP-500-DC

Answer

Continuous use would be approximately 10-12 hours. Battery lift could be impacted by weight lifted in addition to other factors.

View Related Product: MWP-500-DC FID: 265

What is the battery life on the semi electric pallet truck? EPT-S-2748-33

Answer

The EPT-S-2748 battery life is approximately 4-8 hours with moderate/ intermittent use. For continuous use, battery life is approximately 1-3 hours. The battery life may be impacted by the weight and distance of the load being transported.

View Related Product: EPT-S-2748-33 FID: 337

What is the battery life? TM-20-DCTM-40-DCTM-60-DCTMS-20-DCTMS-40-DCTMS-60-DC

Answer

Under normal conditions, on a solid flat surface, the battery is expected to last approximately 100 cycles. If the usage is about 1 cycle every 5 minutes, then the battery life should be about 7.5 hours. If the usage is about 1 cycle every 10 minutes, then the battery life should be 15 hours. If the usage is about 1 cycle every 15 minutes, then the battery life should be 22 hours.

View Related Product: TM-20-DC FID: 221

What is the belt length and width for model LTS-FTSB? LTS-FTSB

Answer

The belt extends to 4-1/2 ft. and is 2" wide.

View Related Product: LTS-FTSB FID: 345

What is the best economical caster? CST-E6

Answer

The CST-E6 series is the best economical caster.

View Related Product: CST-E6 FID: 1253

What is the best economical caster? CST-E6

Answer

The CST-E6 series is the best economical caster.

View Related Product: CST-E6 FID: 151

What is the bolt hole pattern for the casters? D-25-LDD-33-LDD-50-LDD-75-LDD-100-LDD-150-LDD-200-LDD-250-LD+21 more

Answer

The pattern gets punched at the front and back of each fork tube for the casters. The hole diameter is 7/16".

View Related Product: D-25-LD FID: 449

What is the bolt pattern for these casters?

Answer

The casters all have a 4" x 4-1/2" top plate and the mounting holes are 1-3/4" x 2-7/8".

View Related Product FID: 1483

What is the bolt size for the anchor points? EHLTG-3850-2-36EHLTG-3850-4-36EHLTG-4450-2-36EHLTG-4450-4-36EHLTG-5250-2-36EHLTG-5250-4-36EHLTG-4470-2-48EHLTG-4470-4-48+2 more

Answer

The hole diameter is 9/16".

View Related Product: EHLTG-3850-2-36 FID: 208

What is the braking mechanism that holds the lift table? Is it a servo motor brake? PEL-88S-D3

Answer

The PEL-88S-D3 uses a gear box.

View Related Product: PEL-88S-D3 FID: 260

What is the cable length of the HYDRA-H? HYDRA-H

Answer

The single line cable length is 9.85 feet. The double line cable length is 5'.

View Related Product: HYDRA-H FID: 271

What is the capacity for the ride-on platform? ECM-7635-75

Answer

The capacity for the platform is 250 lbs.

View Related Product: ECM-7635-75 FID: 344

What is the capacity of containment of DSHRT-2? DSHRT-2

Answer

The containment capacity is 66 gallons.

View Related Product: DSHRT-2 FID: 811

What is the capacity of FL-LK-4E? FL-LK-4E

Answer

The FL-LK-4E has a capacity of 1,200 lbs.

View Related Product: FL-LK-4E FID: 1066

What is the capacity of the arms on the AFSR-3672? AFSR-3672

Answer

The capacity of the arm is 70 lbs. each. Each storage bay can accommodate up to 140 lbs. The load must be evenly distributed.

View Related Product: AFSR-3672 FID: 981

What is the capacity of the FAB-11-ERGO? FAB-11-ERGO

Answer

FAB-11 can hold a truck which weighs 40 tons.

View Related Product: FAB-11-ERGO FID: 84

What is the capacity of the FL-LKL-3? FL-LKL-3

Answer

The capacity is 9,000 lbs.

View Related Product: FL-LKL-3 FID: 1067

What is the capacity of the floor lock? FL-ADJ

Answer

the FL-ADJ floor locks have a locking capacity of 2,000 lbs.

View Related Product: FL-ADJ FID: 1064

What is the capacity of the HYDC-FRKHK? HYDC-FRKHK

Answer

The HYDC-FRKHK has a 600 lb. capacity.

View Related Product: HYDC-FRKHK FID: 262

What is the capacity of the HYDC-SPIN? HYDC

Answer

The HYDC-SPIN capacity is 400 lbs.

View Related Product: HYDC FID: 262

What is the capacity of the lifting lugs? D-25-LDD-33-LDD-50-LDD-75-LDD-100-LDD-150-LDD-200-LDD-250-LD+21 more

Answer

The capacity of the lifting lug is compatible with the capacity of the hopper.

View Related Product: D-25-LD FID: 449

What is the capacity of the lifting lugs? H-25-LDH-50-LDH-100-LDH-150-LDH-25-MDH-50-MDH-100-MDH-150-MD+4 more

Answer

The capacity of the lifting lugs is compatible with the capacity of the hopper.

View Related Product: H-25-LD FID: 445

What is the capacity of the MWP-RR reel rotator? MWP-RR

Answer

The MWP-RR reel rotator has a capacity of 200 lbs.

View Related Product: MWP-RR FID: 265

What is the capacity of the ORWC-8-ERGO? ORWC-8-ERGO

Answer

The capacity is five tons.

View Related Product: ORWC-8-ERGO FID: 79

What is the capacity of the railing? VDKR-2VDKR-3VDKR-4VDKR-5VDKR-6VDKR-7VDKR-8ADKR-2+10 more

Answer

The VDKR will support 200 lbs. of force in any direction.

View Related Product: VDKR-2 FID: 642

What is the capacity of the trash can? TH-64-BLTH-64-GRNTH-64-GU=Y

Answer

The weight capacity is 211 lbs.

View Related Product: TH-64-BL FID: 230

What is the casters are good for rough or uneven terrain? CST-VE-FF SERIES

Answer

The CST-VE-FF SERIES are good for rough or uneven terrain.

View Related Product: CST-VE-FF SERIES FID: 151

What is the center hole size on the WHL-PP-6X2 caster? WHL-PP-6X2

Answer

The inside diameter with bearing is 3/4".

View Related Product: WHL-PP-6X2 FID: 1603

What is the center to center measurement in the bolt pattern please? BOL-36-8.5BOL-42-8.5BOL-48-8.5

Answer

The center to center measurement in the bolt pattern is 6".

View Related Product: BOL-36-8.5 FID: 658

What is the clearance from the floor to the covering over the front casters? CBFC-500CBFC-1000CBFC-2000CBFC-500-DCCBFC-1000-DCCBFC-2000-DC

Answer

That dimension is 1".

View Related Product: CBFC-500 FID: 587

What is the clearance height of the frame to the floor for RT-EPT-3-48? RT-EPT-3-48

Answer

The clearance height of the frame to the floor is 5-1/2".

View Related Product: RT-EPT-3-48 FID: 1451

What is the clearance height of the frame to the floor for the ALL-T-4-GPT-L? ALL-T-4-GPT

Answer

The clearance height of the frame to the floor is 5".

View Related Product: ALL-T-4-GPT FID: 336

What is the clearance under the IBC-TLT-FPL? IBC-TLT-FPL

Answer

When the IBC-TLT-FPL is in the raised position, the underneath clearance is 31-1/4". In the lowered position, the underneath clearance is 7-1/4".

View Related Product: IBC-TLT-FPL FID: 1638

What is the clearance underneath the cart? EMHC-2848-1EMHC-2860-1EMHC-2872-1EMHC-3672-1

Answer

The clearance is 2".

View Related Product: EMHC-2848-1 FID: 1022

What is the closed and fully extended length of the TAM-30? TAM-30

Answer

The closed dimension is 28-1/2", the extended is 45-1/2" .

View Related Product: TAM-30 FID: 138

What is the compacting plate diameter? HDC-905-IDC/460VHDC-905-HC/460VHDC-905-IDC/230VHDC-905-HC/230VHDC-905-IDC/208VHDC-905-HC/208V

Answer

The diameter is 21".

View Related Product: HDC-905-IDC/460V FID: 755

What is the crank radius of the handle when turning on the MT mechanical post tables? MT

Answer

The crank radius is 8-3/8".

View Related Product: MT FID: 282

What is the cycle time for the TCD-U-48-DC or the TCD-U-60-DC? TCD-U-48-DCTCD-U-60-DC

Answer

Speed is approximately 35 seconds to raise and 35 seconds to lower.

View Related Product: TCD-U-48-DC FID: 228

What is the cycle time to tip and return, please? CTD-H-TP-3000

Answer

Full cycle empty: 13 seconds.
Full cycle loaded: 35 seconds.

View Related Product: CTD-H-TP-3000 FID: 1502

What is the deck size for the platform (VHPS-DK)? VHPS-DK

Answer

The platform option is 27-1/4" x 42"

View Related Product: VHPS-DK FID: 246

What is the deck size for the platform (VWS-DK)? VWS-DK

Answer

The platform option is 21-3/4" x 29-1/2"

View Related Product: VWS-DK FID: 246

What is the degree of rotation for the gripper? S-MU-VDGR-64S-MU-VDGR-72

Answer

The rotation is 360 degrees.

View Related Product: S-MU-VDGR-64 FID: 1423

What is the depth of the CASE-L? CASE-L

Answer

The inside dimensions of the CASE-L are 12" wide, 17" long, 16-3/8" deep.

View Related Product: CASE-L FID: 1132

What is the diameter of the "pipe"? LAD-1-YLAD-2-YLAD-3-YLAD-4-YLAD-5-Y

Answer

The diameter of the "pipe" is 7/8".

View Related Product: LAD-1-Y FID: 607

What is the diameter of the "Pole". VAN-JVAN-J-DC

Answer

The diameter of the pole is 3-1/2".

View Related Product: VAN-J FID: 583

What is the diameter of the "railing"? SPA-2-2236SPA-3-2236SPS-2-2236SPS-3-2236

Answer

The diameter of the railing is 1-1/4".

View Related Product: SPA-2-2236 FID: 923

What is the diameter of the bails? SBM-25SBM-40SBM-80

Answer

The lower bails have a 1" diameter. The upper bail has a 1-1/4" diameter.

View Related Product: SBM-25 FID: 572

What is the diameter of the bolt for CST-VE-5X2PUP-SWB? CST-VE-5X2PUP-SWB

Answer

The bolt diameter is 1/2".

View Related Product: CST-VE-5X2PUP-SWB FID: 1250

What is the diameter of the E-TUG-PINH? E-TUG-PINHE-TUG-10E-TUG-20E-TUG-30

Answer

The diameter of the pin (E-TUG -PINH) is approximately 3/4".

View Related Product: E-TUG-PINH FID: 1019

What is the diameter of the extended arms? VBR-9

Answer

They are 1-1/2".

View Related Product: VBR-9 FID: 1101

What is the diameter of the FM-BAR used with edge o dock leveler? FM-0648FM-2066FM-2072FM-2078FM-2566FM-2572FM-3066FM-3072+1 more

Answer

The diameter of the FM-BAR is approximately 1-5/16".

View Related Product: FM-0648 FID: 5

What is the diameter of the handrail on the ATS-8-68? ATS-8-68

Answer

The handrail has a 1-1/4" diameter.

View Related Product: ATS-8-68 FID: 612

What is the diameter of the hole for the axle? WHL-MA-10X2.5

Answer

The diameter is 1".

View Related Product: WHL-MA-10X2.5 FID: 1599

What is the diameter of the hole on the drop pin? EXGATE-30-C

Answer

The diameter of the hole is 1/2".

View Related Product: EXGATE-30-C FID: 748

What is the diameter of the holes in CS-33-BL? CS-33-BL

Answer

The usable hole is 1/2" in diameter, with a 1-1/2" diameter top access hole (for a socket wrench).

View Related Product: CS-33-BL FID: 111

What is the diameter of the light unit ? LL-HD-LED-24

Answer

The diameter of the light is approximately 6-3/4".

View Related Product: LL-HD-LED-24 FID: 67

What is the diameter of the lower pipe for CT-02?, (not the upper one). CT-02

Answer

Upper and lower are the same, the dimensions are 5"L x 9-3/4"W x 26"H.

View Related Product: CT-02 FID: 89

What is the diameter of the mast of the WTJ-20-4-DC?

Answer

The diameter of the mast is 4".

View Related Product FID: 582

What is the diameter of the wheel on the HTWL-800-HR? HTWL-800-HR

Answer

The diameter of the wheel is 10".

View Related Product: HTWL-800-HR FID: 1001

What is the difference between a Dock Seal Vs. a Truck Shelter? D-150-10D-150-11D-150-12D-150-13D-150-14-D-150-15D-150-16D-150-17D-150-18+2 more

Answer

A dock seal is traditionally designed to enclose a loading dock reducing its width to an optimal 7'6", while a truck shelter is designed to allow full access to the trailer without restricting the available space around the door. Truck shelters typically afford service to a wider range of trucks than a dock seal as well, due to the nature of the seal. When a vehicle docks with a shelter the curtains with spring steel stays slide along the side of the vehicle rather than compress like a dock seal.

View Related Product: D-150-10 FID: 19

What is the difference between a Dock Seal Vs. a Truck Shelter? D-750-18D-750-24D-750-30D-750-36

Answer

View Related Product: D-750-18 FID: 21

What is the difference between the HDC-905-IDC and the HDC-905-HC? HDC-905

Answer

The IDC (standard model) will manage up to 15 cycles per hour. The HC (high cycle) can be used continuously.

View Related Product: HDC-905 FID: 795

What is the difference between the LOW-1P and the LOW-1G trolley? LOW-1PLOW-2PLOW-4PLOW-6PLOW-1GLOW-2GLOW-4GLOW-6G

Answer

The LOW-x-P (push trolley) is moved by pushing it along the I-beam.
The LOW-x-G (geared trolley) is moved by pulling a chain which rotates gears and moves the trolley along the I-beam.

View Related Product: LOW-1P FID: 539

What is the difference between the standard (IDC) and the high cycle (HC)? HDC-905-IDC/460VHDC-905-HC/460VHDC-905-IDC/230VHDC-905-HC/230VHDC-905-IDC/208VHDC-905-HC/208V

Answer

HDC-905-HC is high cycle version. It has a heavy duty continuous run (with timer) power unit and will basically do unlimited number of cycles.
Standard unit is designed for a duty cycle that will allow for crushing or compacting up to 250 drums per week in a typical non-hazardous, indoor room-temperature environment when operated on a three-phase power supply.

View Related Product: HDC-905-IDC/460V FID: 755

What is the dimension from the platform to the hooks on the BBL-B001 where the bag would be hung? BBL-B001

Answer

That dimension is 52".

View Related Product: BBL-B001 FID: 1711

What is the dimension from the platform to the hooks on the BBL-RK-72 where the bag would be hung? BBL-RK-72

Answer

That dimension is 52".

View Related Product: BBL-RK-72 FID: 1711

What is the dimension between the legs? PSDT-ADP-2136

Answer

The dimensions between the legs is 53".

View Related Product: PSDT-ADP-2136 FID: 1727

What is the dimension form the floor to the top of the handle? CART-500-2033-FP

Answer

It is 37" from the floor to the top of the handle.

View Related Product: CART-500-2033-FP FID: 294

What is the dimension from the triangular plate to the bottom of the jack of model FJ-K2? FJ-K2

Answer

That dimension is 9".

View Related Product: FJ-K2 FID: 89

What is the dimension of the inside diameter of this bollard? BOLPP-48-5.5

Answer

The inside diameter of the BOLPP-48-5.5 is 5.295".

View Related Product: BOLPP-48-5.5 FID: 671

What is the dimension of the lip on this dolly? OCTO-55

Answer

The lip dimension is 1-3/8".

View Related Product: OCTO-55 FID: 881

What is the dimension of the magnet for model MS-48 (not counting the handle)? MS-48

Answer

The magnet measures 48" long X 3" wide X 4" tall.

View Related Product: MS-48 FID: 139

What is the dimension of the opening of the links? BOL-CHAIN

Answer

The opening of the links is 1/4".

View Related Product: BOL-CHAIN FID: 670

What is the dimension of the opening of the links? CHAIN-316-PF-BLCHAIN-316-PF-BLKCHAIN-316-PF-ORCHAIN-316-PF-RDCHAIN-316-PF-WHTCHAIN-316-PF-YL

Answer

The link opening is 1/4".

View Related Product: CHAIN-316-PF-BL FID: 1629

What is the dimension of the platform on the LO-DC-SCL? LO-DC-SCL

Answer

The platform measures 24-3/4" wide and 17" deep.

View Related Product: LO-DC-SCL FID: 792

What is the distance between arms on the SR-SS? SR-SS

Answer

There is a 7-1/4" clearance between the arms.

View Related Product: SR-SS FID: 1112

What is the distance between the "slats"? EA-SKRG-60-LP

Answer

The slats are 3" with 1/4" between the slats.

View Related Product: EA-SKRG-60-LP FID: 157

What is the distance between the mounting holes for B-818-SF?

Answer

The distance between the mounting holes is 8".

View Related Product FID: 94

What is the distance between the rails on the SPR-120's? SPR-120-WSPR-120-Y

Answer

The distance between the rails on the SPR-120's is 7-1/4", from rail to rail.

View Related Product: SPR-120-W FID: 650

What is the distance between the two feet? MWP-440-M-SS

Answer

The distance between the two feet is 14-1/2".

View Related Product: MWP-440-M-SS FID: 265

What is the distance between the two horizontal plates on E-TUG-HD-PINH? E-TUG-HD-PINH

Answer

The distance between the two horizontal plates is 1-3/4".

View Related Product: E-TUG-HD-PINH FID: 1019

What is the distance from the "HOOK" to where it attaches to the crane boom on the EHN-60-T when fully extended? EHN-60-T

Answer

The distance from the attached chain to the hook is 13".

View Related Product: EHN-60-T FID: 584

What is the distance from the floor to the fork? S-118-AA-FR

Answer

With the forks lowered, the distance from the floor to the forks is 2". With the forks raised, the distance from the floor to the forks is 118".

View Related Product: S-118-AA-FR FID: 255

What is the distance from the wheel base to the end of the fork? VHPS-2000-AA

Answer

It is 12" from the wheel base to the end of the fork.

View Related Product: VHPS-2000-AA FID: 246

What is the distance in between the forks for PM4-2148-LP? PM4-2148-LP

Answer

The distance between the forks for model PM4-2148-LP is about 8".

View Related Product: PM4-2148-LP FID: 312

What is the distance in between the legs on the DRUM-55-SCL? DRUM-55-SCL

Answer

The inside dimension between the legs of the DRUM-55-SCL is 25".

View Related Product: DRUM-55-SCL FID: 790

What is the distance of the bolt-hole spacing and diameter of the holes? Is the hole setback distance from the guard rail ends standardized on all lengths of the product? GR-H2R-BO-12-HDG

Answer

All of the guard rail holes are 2-1/2" from the end with the middle hole centered in the length of the guard rail.

View Related Product: GR-H2R-BO-12-HDG FID: 654

What is the driving speed for EPT-CFR-2748-40? EPT-CFR-2748-40

Answer

The unloaded driving speed is 2.8 MPH. The loaded driving speed is 2.5 MPH.

View Related Product: EPT-CFR-2748-40 FID: 1810

What is the factor of safety for SP-TOP ? SP-TOP

Answer

The factor of safety is 5:1.

View Related Product: SP-TOP FID: 90

What is the finish on the base? PARK-P-108-FD-SS

Answer

The base of the bollard has a powder coat finish.

View Related Product: PARK-P-108-FD-SS FID: 677

What is the fork pocket opening size on the FMDL-1500? FMDL-1500

Answer

The pockets measure 7" wide x 2-1/2" tall.

View Related Product: FMDL-1500 FID: 775

What is the fork pocket size of this hopper? HOP-150-LD

Answer

The fork openings are: 2-1/2" high x 14" wide x 48" length under the base.

View Related Product: HOP-150-LD FID: 460

What is the fork size? EPT-SF-1232-26

Answer

The fork size is 12" x 32" for the EPT-SF-1232-26.

View Related Product: EPT-SF-1232-26 FID: 1693

What is the fork thickness of model ALL-T-2? ALL-T-2

Answer

2" at the heel and tapers down to 1/4" at the tip.

View Related Product: ALL-T-2 FID: 335

What is the fork trucks maximum hydraulic pressure needed for model LM-1T-8-24-HBE-TP? LM-1T-8-24-HBE-TP

Answer

The maximum hydraulic pressure needed for LM-1T-8-24-HBE-TP is 3000 PSI.

View Related Product: LM-1T-8-24-HBE-TP FID: 1776

What is the free lift on the counterbalanced stackers? S-CB-62S-CB-118S-2CB-62S-2CB-118

Answer

There is not a "free lift" on the counterbalanced stackers. It will lift at a 2:1 ratio. For every 2" the forks raise, the mast will raise 1".

View Related Product: S-CB-62 FID: 254

What is the gauge and thickness of the steel, please? FM-2572

Answer

The lip and mid plate are 1/2". The back plate is 3/8" for models FM/PE/PP 25,000 lb. capacity.

View Related Product: FM-2572 FID: 5

What is the gauge and thickness of the steel, please? FM-3072

Answer

Models FM/PE/PP 30,000 lb. capacity the lip, mid plate and back plate are all 1/2".

View Related Product: FM-3072 FID: 5

What is the gauge and thickness of the steel, please? FM-0648

Answer

On the FM-0648 the lip, mid plate, and back plate are all 1/4".

View Related Product: FM-0648 FID: 5

What is the gauge and thickness of the steel, please? FM-2072

Answer

The lip, mid plate, and back plate are all 3/8" for Models FM/PE/PP 20,000 lb. capacity.

View Related Product: FM-2072 FID: 5

What is the gauge of steel and thickness of the handle? BKT-GAL-325

Answer

The handle is steel and galvanized coated. The diameter is 6 mm.

View Related Product: BKT-GAL-325 FID: 913

What is the gauge of steel for the GR-F2R & GR-F3R rails? GR-F2RGR-F3R

Answer

11 Gauge.

View Related Product: GR-F2R FID: 655

What is the gauge of steel of this product? PRAIL-102-HD-GPRAIL-102-HD-G-WWPRAIL-102-HD-G-FFPRAIL-102-HD-G-WFPRAIL-102-HD-G-W

Answer

The PRAIL is 14 gauge steel.

View Related Product: PRAIL-102-HD-G FID: 646

What is the gauge of steel or thickness of the platform? ECSPT-1832ECSPT-2436ECSPT-2448ECSPT-2460ECSPT-2754ECSPT-3060-ECSPT-3672

Answer

The platform is 14 gauge steel and is 0.082".

View Related Product: ECSPT-1832 FID: 1628

What is the gauge of steel? EA-SKHH-200

Answer

The steel is 8 gauge.

View Related Product: EA-SKHH-200 FID: 1736

What is the gauge of the steel for STAPLE-BX-58? STAPLE-BX-58

Answer

STAPLE-BX-58 are made from 20 gauge steel.

View Related Product: STAPLE-BX-58 FID: 398

What is the grade of steel used in SFS-149-SL? SFS-149-SL

Answer

Steel A36 is used.

View Related Product: SFS-149-SL FID: 635

What is the headroom for MINI-7 with the MINI-SH-7? MINI-7MINI-SH-7

Answer

The headroom for the MINI-7 with the MINI-SH-7 is 24-3/8".

View Related Product: MINI-7 FID: 555

What is the height and width of the handle on the CART-PN-600? CART-PN-600

Answer

The handle is 14" wide and 32" long.

View Related Product: CART-PN-600 FID: 293

What is the height from the floor to the bottom of the cart in the lowered position? CART-PN-400

Answer

It is 8-1/2" from floor to bottom of CART-PN-400.

View Related Product: CART-PN-400 FID: 293

What is the height of the base leg for this HU-C-8-36 upright please? HU-C-8-36

Answer

The height of the base leg is 9-1/2".

View Related Product: HU-C-8-36 FID: 1094

What is the height of the black legs from the ground to the top of the leg? VWS-770-AA

Answer

That dimension is 6-1/2".

View Related Product: VWS-770-AA FID: 246

What is the height of the casters? How easy is it to maneuver? HDOS-2436-9

Answer

Main deck is approximately 1" thick. Where the casters are mounted, it is almost 2" thick. They are designed for easy maneuverability.

View Related Product: HDOS-2436-9 FID: 1034

What is the height of the jack in the lowest position from the ground? PM1-153-MINI

Answer

The height of the jack in the lowest position from the ground is 2-3/8".

View Related Product: PM1-153-MINI FID: 309

What is the height of the lip? MIAMSA

Answer

Lip height is 3-1/8" usable height.

View Related Product: MIA FID: 1093

What is the height of the load guard back rest? S-118-AA-FR

Answer

The load guard back rest is 30" high.

View Related Product: S-118-AA-FR FID: 255

What is the height range for model EWB-6030? Since it is adjustable, I need lowest and tallest heights. EWB-6030

Answer

Lowest height: 32-1/8". Highest height: 44".

View Related Product: EWB-6030 FID: 363

What is the hook to ground measurement when boom is fully extended both horizontally and vertically? P-JIB-2P-JIB-4

Answer

The hook to ground measurement is 110".

View Related Product: P-JIB-2 FID: 588

What is the horizontal and vertical center of gravity for the work platform? WP-3636WP-3648WP-4848WP-4848-FFWP-3636-84BWP-3648-84BWP-4848-84BWP-4848-84B+5 more

Answer

The horizontal center of gravity (HCG) and the vertical center of gravity (VCG) are the dimensions to the center of gravity which can be found on the approval drawing under the model details section of the website page.

View Related Product: WP-3636 FID: 470

What is the horizontal space between arms on the CANT-3060? CANT-3060

Answer

The horizontal space between arms is 56".

View Related Product: CANT-3060 FID: 1095

What is the horsepower of the H-1000-3? H-1000-3

Answer

2.14 horsepower.

View Related Product: H-1000-3 FID: 547

What is the HP for these tables and how long does it take to raise and lower the table? EHLTG-4484-3-54EHLTG-5284-3-54

Answer

The 2HP table raises to 54" in 32 seconds and lowers in 18 seconds.

View Related Product: EHLTG-4484-3-54 FID: 208

What is the hydraulic fluid ? PST

Answer

The hydraulic fluid is ISO 32.

View Related Product: PST FID: 203

What is the impact rating for the BOL-CI bollards? BOL-CI-28-3BOL-CI-28-5BOL-CI-28-7BOL-CI-39-5BOL-CI-40-8BOL-CI-38-8

Answer

These bollards are rated to stop 4,000 lbs. at 4 mph, when properly anchored into concrete. Please note, this type of impact will permanently deform the bollard and would need replaced.

View Related Product: BOL-CI-28-3 FID: 687

What is the impact rating for the FBSOL series? FSBOL-24 FSBOL-36 FSBOL-42 FSBOL-48 FSBOL-62 FSBOL-72

Answer

4,000 lbs. force @ 4mph

View Related Product: FSBOL-24 FSBOL-36 FSBOL-42 FSBOL-48 FSBOL-62 FSBOL-72 FID: 699

What is the impact rating for the HPRO-48-36-4? HPRO-36-24-4HPRO-48-24-4HPRO-36-36-4HPRO-48-36-4HPRO-36-42-4HPRO-48-42-4HPRO-60-42-4HPRO-72-42-4

Answer

It is 4,000 lbs. force @ 4 MPH. This is the same for all of our 4-1/2" diameter HPROs.

View Related Product: HPRO-36-24-4 FID: 692

What is the impact rating of the BOL-R-48-5.5 bollard? BOL-R-48-5.5

Answer

The bollard has an impact rating of 4,000 lbs. of force at 4 MPH.

View Related Product: BOL-R-48-5.5 FID: 672

What is the impact rating of the guard rail? YGR

Answer

The impact rating of the guard rail is 4,000 lbs. at 4 MPH.

View Related Product: YGR FID: 655

What is the impact rating of these bollards?

Answer

The impact rating is 4,000 lbs. of force at 4 MPH.

View Related Product FID: 683

What is the incline degree that these units will climb? RT-EPT-3-48RT-EPT-3-24

Answer

These units will climb 6° without load, 3° with load.

View Related Product: RT-EPT-3-48 FID: 1451

What is the inside diameter of the 30 gallon drum? SD-30-OH-02SD-30-OH-05SD-30-OH-07SD-30-TH-08SD-30-TH-13

Answer

The inside diameter of the 30 gallon drum measurers 18-1/4".

View Related Product: SD-30-OH-02 FID: 846

What is the inside diameter of the 55 gallon drum? SD-55-OH-04SD-55-OH-06SD-55-OH-07SD-55-OH-08SD-55-TH-13SD-55-TH-15SD-55-TH-16

Answer

The inside diameter of the 55 gallon drum measurers 22-1/2".

View Related Product: SD-55-OH-04 FID: 846

What is the inside diameter of the base tube on the HRAIL-BASE? HRAIL-BASE

Answer

The inside diameter of the HRAIL-BASE is 15/16".
The outside diameter is 1-1/10".

View Related Product: HRAIL-BASE FID: 749

What is the inside dimension between the forks on the EPT-1540-26? EPT-1540-26

Answer

The dimension between the forks is 4-1/4".

View Related Product: EPT-1540-26 FID: 342

What is the inside dimension between the forks? EPT-4048-45-RL

Answer

The inside dimension between the forks on the EPT-4048-45-RL is 22-3/4".

View Related Product: EPT-4048-45-RL FID: 1435

What is the inside dimension of the dolly? PDD-5

Answer

The inside diameter is 10-3/4".

View Related Product: PDD-5 FID: 903

What is the IP rating for operation outdoors? RT-EPT-3-24RT-EPT-3-48

Answer

The IP rating is IP50.

View Related Product: RT-EPT-3-24 FID: 1451

What is the IP rating of the E-TUG-20? E-TUG-20

Answer

The IP rating is IP54.

View Related Product: E-TUG-20 FID: 1019

What is the largest diameter the WALL-D can accommodate? WALL-D

Answer

The largest diameter the WALL-D can handle is 3/16".

View Related Product: WALL-D FID: 593

What is the length of the legs? PSDT-ADP-2136

Answer

The legs are 28" long.

View Related Product: PSDT-ADP-2136 FID: 1727

What is the length of the base for HU-C-8-36? HU-C-8-36

Answer

The length of the base is 36".

View Related Product: HU-C-8-36 FID: 1094

What is the length of the cable on the EMH-3? EMH-3

Answer

The length of the cable on the EMH-3 is 90 ft.

View Related Product: EMH-3 FID: 554

What is the length of the legs and forks for HYD-CRL-40? HYD-CRL-40

Answer

The length of legs are 11-1/8" each and the length of the forks are 20-1/8" each.

View Related Product: HYD-CRL-40 FID: 332

What is the length of the line on model P-JIB-4? P-JIB-4

Answer

The length is 15 ft.

View Related Product: P-JIB-4 FID: 588

What is the length of the line on the portable cantilever hoist? P-JIB-2P-JIB-4

Answer

The line on the P-JIB-2 is 14' long.

View Related Product: P-JIB-2 FID: 588

What is the length of the links? BOL-CHAIN

Answer

The length of the links is 1-3/8".

View Related Product: BOL-CHAIN FID: 670

What is the length of the links? CHAIN-316-PF-BLCHAIN-316-PF-BLKCHAIN-316-PF-ORCHAIN-316-PF-RDCHAIN-316-PF-WHTCHAIN-316-PF-YL

Answer

The length of the links is 1-3/8".

View Related Product: CHAIN-316-PF-BL FID: 1629

What is the length of the pendant/hand control of model EMH-5? EMH-5

Answer

There are two cords to the pendant. One is 265" and the other is 185".

View Related Product: EMH-5 FID: 554

What is the length of the power cord? SCALE-S-CFT-44-5KSCALE-S-CFT-55-5KSCALE-S-CFT-44-10KSCALE-S-CFT-55-10K

Answer

The power cord is 5 ft.

View Related Product: SCALE-S-CFT-44-5K FID: 389

What is the length of the pull chain? HCH-2-10

Answer

The pull chain on the HCH-2-10 is 105".

View Related Product: HCH-2-10 FID: 545

What is the length of the spikes? SBRY-72-A

Answer

The spikes are 12" long for SBRY-72-A.

View Related Product: SBRY-72-A FID: 108

What is the length of the strap? LM-HP6-S

Answer

The strap is 48" long.

View Related Product: LM-HP6-S FID: 478

What is the life cycle of spring on the E-TUG-HD-SLH? E-TUG-10E-TUG-20E-TUG-30

Answer

The life cycle of spring for moderate use is approximately 1 to 2 years.

View Related Product: E-TUG-10 FID: 1019

What is the life cycle of the hitch E-TUG-HD-SLH ? E-TUG-10E-TUG-20E-TUG-30

Answer

The life cycle of the hitch is approximately one year with moderate use.

View Related Product: E-TUG-10 FID: 1019

What is the life expectancy of this spill pallet? DR-4-UT

Answer

Expected lifespan is at least ten (10) years. You can expect longer, but the actual life is dependent on several factors. These pallets use the highest rated UV package in the resin formulation it uses to create the longest outdoor life available for a PE product.

These pallets are designed for secondary spill containment for four 55-gal drums or smaller containers. They hold a total of 66-gal should one of the containers on the pallet were to fail and have either a leak or spill.

Deterioration will depend on the application and what chemicals may come into contact with the LLDPE that is used to mold this pallet.

View Related Product: DR-4-UT FID: 812

What is the life expectancy of this unit? VSP-12-001

Answer

The life time of the projector is approximately 30,000 hours.

View Related Product: VSP-12-001 FID: 1508

What is the lifting capacity of the MMJ-6? MMJ-6

Answer

The 3,000 lb. capacity for the MMJ-6 is for both static and lifting.

View Related Product: MMJ-6 FID: 360

What is the lifting speed for EPT-CFR-2748-40? EPT-CFR-2748-40

Answer

The unloaded lifting speed is 5 seconds to max height. The loaded lifting speed is 6.35 seconds to max height.

View Related Product: EPT-CFR-2748-40 FID: 1810

What is the lifting speed of the AT-10? AT-10

Answer

When the table is loaded at 200 lbs. the lifting speed is 13.31 seconds. The table unloaded lifting speed is 8.31 seconds.

View Related Product: AT-10 FID: 300

What is the lifting speed? S-118-AA-FR

Answer

Lifting speed for the S-118-AA-FR is 18 seconds unloaded.
When loaded, the lifting speed is 21 seconds.

View Related Product: S-118-AA-FR FID: 255

What is the lip height for HSA? HSA

Answer

The lip height is 3-1/8" usable height.

View Related Product: HSA FID: 1094

What is the lip height for XHDSA and HDSA? XHDSAHDSA

Answer

The lip height is 3-1/8" usable height.

View Related Product: XHDSA FID: 1094

What is the load center for S-114-AA-LION? S-114-AA-LION

Answer

The load center for S-114-AA-LION is 22".

View Related Product: S-114-AA-LION FID: 1730

What is the load center for the work platform? WP-3636WP-3648WP-4848WP-4848-FFWP-3636-84BWP-3648-84BWP-4848-84BWP-4848-84B+5 more

Answer

The load center would roughly half of the platform length . Please refer to the approval drawing under the model details section of the website page.

View Related Product: WP-3636 FID: 470

What is the load rating for the GWC-10? GWC-10

Answer

The load rating is 10,000 lbs.

View Related Product: GWC-10 FID: 82

What is the locking capacity of the FL-LKH-8? FL-LKH-8

Answer

The locking capacity of the FL-LKH-8 is 2,000 lbs.

View Related Product: FL-LKH-8 FID: 1067

What is the longest usable cable? WTJ-E-15-3-AC

Answer

The winch holds 25 feet of cable.

View Related Product: WTJ-E-15-3-AC FID: 582

What is the lowered height for PEL-88A-D3 with the PEL-CONV attachment? PEL-88S-D3

Answer

The lowered height for PEL-88A-D3 with the PEL-CONV attachment is 7".

View Related Product: PEL-88S-D3 FID: 260

What is the lowest temperature these PEL units can be used in? Can it be used in a below freezing environment? PEL-88PEL-100PEL400

Answer

These are not recommended for temps less than 20°F.
The battery charge will not last as long in cold temps.
The PELs are not rated for use around moisture or condensation.

View Related Product: PEL-88 FID: 260

What is the magnetic pull on the Magnetic Push Sweepers? MFSRMPSR

Answer

The magnetic pull is 40 pounds.

View Related Product: MFSR FID: 138

What is the material difference between LP and LPX models? EA-SKSB-60-LPEA-SKSB-60-LPX

Answer

LP models are 10 GA. material (0.1345 thick) and have a weld on cutting edge
LPX models are 1/4 in (0.25 thick) and have a bolt on cutting edge.

View Related Product: EA-SKSB-60-LP FID: 157

What is the material of the ring? What is the material of the ball bearings? CA-40-2-SSCA-40-4-SSCA-40-6-SS

Answer

Both the ring and the ball bearings are AISI 304 stainless steel.

View Related Product: CA-40-2-SS FID: 379

What is the material the handle is made of? PPT-2-41PPT-3-61

Answer

The handle on the PPT is made of steel.

View Related Product: PPT-2-41 FID: 961

What is the max amp draw for this unit? HST-40-ST

Answer

Amp draw with load:20A
Amp draw without load:16A

View Related Product: HST-40-ST FID: 1437

What is the max weight the scale will register? PM-2048-SCL-LPPM-2048-SCL-LP-PTPM-2048-SCL-LP-SSPM-2146-TL-SCL-LPPM-2746-TL-SCL-LPPM-2748-SCL-LPPM-2748-SCL-LP-EPM-2748-SCL-LP-PT+1 more

Answer

The scale should be programmed to register to the max capacity.

View Related Product: PM-2048-SCL-LP FID: 318

What is the maximum height of the S-CB-62-DDC when extended? S-CB-62-DDC

Answer

The height of the S-CB-62-DDC when extended is 95-1/2".

View Related Product: S-CB-62-DDC FID: 793

What is the maximum incline you can use with model EMHC-2860-4? EMHC-2860-4

Answer

Five degrees of incline with a full load, ten degrees without load.

View Related Product: EMHC-2860-4 FID: 1022

What is the maximum material width PLDL-HD-4-8MR can accept? PLDL-HD-4-8MR

Answer

The PLDL-HD-4-8MR can accommodate materials up to 3-3/4" thick.

View Related Product: PLDL-HD-4-8MR FID: 976

What is the maximum number of shelves that can be added for VRSOR-60? VRSOR-60

Answer

The unit has 67" of useable space with mounting holes 2-1/4" apart.
Each shelf needs approximately 6" to function properly.

View Related Product: VRSOR-60 FID: 1097

What is the maximum operating lift height? HWL-330

Answer

The maximum operating lift height is 43-1/2".

View Related Product: HWL-330 FID: 267

What is the maximum PULL CAPACITY of a HOOK-BASE? HOOK-BASE

Answer

Do not use the HOOK-BASE to pull loads of more than 2,500 pounds. Trailer + load must be 2,500 pounds or less.

View Related Product: HOOK-BASE FID: 479

What is the maximum ramp angle on the SNM-62-FA? SNM-62-FA

Answer

This unit has a 0 degree incline.

View Related Product: SNM-62-FA FID: 251

What is the maximum thickness the PKG-PTC will work with? PKG-PTC

Answer

Maximum Thickness is 0.035"

View Related Product: PKG-PTC FID: 417

What is the maximum weight of the box can be used on this? ASM-3123

Answer

Weight should not exceed 70 lbs.

View Related Product: ASM-3123 FID: 413

What is the maximum width between the lifting arms without the platform? HWL-330

Answer

The maximum width between the lifting arms without the platform is 15-3/4".

View Related Product: HWL-330 FID: 267

What is the maximum width between the outer leg supports? VHPS-3000-AA-17

Answer

The maximum width is 50".

View Related Product: VHPS-3000-AA-17 FID: 246

What is the maximum working height or the top step height on the A-LIFT-EHP-LAD option? A-LIFT-EHP-LAD

Answer

The top step height is 66-1/2".

View Related Product: A-LIFT-EHP-LAD FID: 270

What is the measurement for the opening of the shackle on the HOOK-S-10? HOOK-S-10

Answer

The shackle opening is 1-1/2".

View Related Product: HOOK-S-10 FID: 481

What is the measurement of the "mast" (the triangular piece at the back of the forks)? L-220-HDL-270-HDL270-HD-SSL-270-DC-HDL-270-DC-HDL-270-DC-HD-SS

Answer

The "mast" is 18" tall.

View Related Product: L-220-HD FID: 238

What is the minimum aisle width for S-2CB-62? S-2CB-62

Answer

The minimum aisle width for S-2CB-62 is 144", with the stand-up platform folded up.

View Related Product: S-2CB-62 FID: 254

What is the minimum amount of weight to "level" the tilt on the IBC-TLT? IBC-TLT

Answer

The cart is level with 4,400 lbs. The tilt will reach 5° when there is less than 150 lbs. on the cart.

View Related Product: IBC-TLT FID: 814

What is the minimum amount the load indicators register? DLI-05DLI-1DLI-2DLI-4DLI-7DLI-14

Answer

The digital load indicators register from zero to the maximum capacity.

View Related Product: DLI-05 FID: 577

What is the minimum beam width/inside width when closed for model BT-20? BT-20

Answer

Inside width when closed is 2-9/16".

View Related Product: BT-20 FID: 563

What is the minimum factor of safety for the crane design for the WTJ-20-4-DC? WTJ-20-4-DC

Answer

All units (WTJ series on this product page) are built to a 3:1 safety factor.

View Related Product: WTJ-20-4-DC FID: 582

What is the minimum height for stairs? PDSC-350-62

Answer

The maximum step height is 8". The minimum step height is anything less than 8".

View Related Product: PDSC-350-62 FID: 1627

What is the minimum size of cylinder that will work with the CYL-M-10? CYL-M-10

Answer

The CYL-M-10 is designed for a 10" cylinder. We offer the CYL-M-9 and CYL-M-7. For custom size options, please contact our sales department.

View Related Product: CYL-M-10 FID: 883

What is the noise level of HDC-905 drum crusher? HDC-900-GPT

Answer

The noise level is 75 dB at 3 feet from the power unit.

View Related Product: HDC-900-GPT FID: 756

What is the outside diameter of the roll? SWA-FILM

Answer

The outside diameter is 8".

View Related Product: SWA-FILM FID: 369

What is the overall height when the boom is extended? P-JIB-4

Answer

With the boom fully extended and fully raised, the overall height is 125".

View Related Product: P-JIB-4 FID: 588

What is the overall height with the forks raised for A-LIFT-R-HP? A-LIFT-R-HP

Answer

The raised forks are 3" above the frame.

View Related Product: A-LIFT-R-HP FID: 270

What is the overall length of the actuation bar? FM-0648FM-2066FM-2072FM-2078FM-2566FM-2572FM-3066FM-3072

Answer

The overall length of the FM-BAR is 41".

View Related Product: FM-0648 FID: 5

What is the per 34.875 inch ramp unit weight? RCR-35

Answer

28 lbs. per unit piece.

View Related Product: RCR-35 FID: 61

What is the platform of VWS-DK made of? What is the capacity and thickness ? VWS-DK

Answer

The platform is made of chromed steel. The thickness is 9 gauge with a 770 lbs. capacity.

View Related Product: VWS-DK FID: 246

What is the PSI required to operate the AIR-J? AIR-J

Answer

102-145 PSI is required.

View Related Product: AIR-J FID: 359

What is the pull weight for magnet sweeper model MPSR-24-B ? MFSR-24

Answer

MPSR-24-B pull weight is 50 lbs. MFSR-24 pull weight is 30 lbs.

View Related Product: MFSR-24 FID: 138

What is the purpose of the FMDL roller and belt units? FMDL-1-LDS-R3FMDL-2-LDS-R3FMDL-1-LDSB1FMDL-2-LDSB1

Answer

The roller and belt units create a softer surface when picking up drums. These units are ideal for drums that could potentially become scratched while moving the drum.

View Related Product: FMDL-1-LDS-R3 FID: 774

What is the purpose of the black box on the handle? LSC-2448-4SD

Answer

The handle part comes off and the cart can be attached to a lawn tractor.

View Related Product: LSC-2448-4SD FID: 956

What is the raise and lower time for HT-20-2436-DC? HT-20-2436-DC

Answer

The approximate raise time of the DC (battery powered) unit is 10.5 seconds. The unit lowers in approximately 4 seconds.

View Related Product: HT-20-2436-DC FID: 285

What is the raise and lower time for HT-20-3036-DC? HT-20-3036-DC

Answer

The approximate raise time of the DC (battery powered) unit is 10.5 seconds. The unit lowers in approximately 4 seconds.

View Related Product: HT-20-3036-DC FID: 285

What is the raise and lower time for HT-40-2436-DC? HT-40-2436-DC

Answer

The approximate raise time of the DC (battery powered) unit is 10.5 seconds. The unit lowers in approximately 4 seconds.

View Related Product: HT-40-2436-DC FID: 285

What is the raise and lower time for HT-40-3248-DC? HT-40-3248-DC

Answer

The approximate raise time of the DC (battery powered) unit is 10.5 seconds. The unit lowers in approximately 4 seconds.

View Related Product: HT-40-3248-DC FID: 285

What is the raise and lower time for HT-60-2436-DC? HT-60-2436-DC

Answer

The approximate raise time of the DC (battery powered) unit is 25 seconds. The unit lowers in approximately 8 seconds.

View Related Product: HT-60-2436-DC FID: 285

What is the raise and lower time for HT-60-3248-DC? HT-60-3248-DC

Answer

The approximate raise time of the DC (battery powered) unit is 25 seconds. The unit lowers in approximately 8 seconds.

View Related Product: HT-60-3248-DC FID: 285

What is the raise and lower time of the WP-400-AC? WP-400-AC

Answer

The WP-400-AC has a linear actuator (no hydraulics). The zero-load speed is approximately 7 mm/sec (0.28 in/sec), the full-load speed approximately 5 mm/sec (0.2 in/sec).
Raised height (12") for fully loaded would be approximately one minute.

View Related Product: WP-400-AC FID: 357

What is the raise time on the MWP-500-DC? MWP-500-DC

Answer

The raised time is 38 seconds.

View Related Product: MWP-500-DC FID: 265

What is the range of cylinder diameters that can be used with this? MCHT-350

Answer

The cylinder hand truck can accommodate cylinder diameters up to 24".

View Related Product: MCHT-350 FID: 878

What is the recommended aisle width in order to use SL-118-AA? SL-118-AA

Answer

The recommended aisle width for usage of SL-118-AA is 84".

View Related Product: SL-118-AA FID: 250

What is the recommended PSI of the tires on the ALL-T-2-48? ALL-T-2-48

Answer

It is marked on the side of the tires themselves. 36 PSI for the large tires and 30 PSI for the steer tires.

View Related Product: ALL-T-2-48 FID: 335

What is the recommended tank length for LP-6? LP-6

Answer

The recommended tank length for LP-6 is approximately 29" long.

View Related Product: LP-6 FID: 895

What is the recommended wire rope gauge and max length? WALL-D

Answer

For the WALL-D, we recommend 1/4" wire that is 26" long.

View Related Product: WALL-D FID: 593

What is the right angle stack space for the SLNM-98-AA? SLNM-98-AA

Answer

The right angle stack space for that unit is 82 inches.

View Related Product: SLNM-98-AA FID: 248

What is the run time for the pallet jack? How long should a pallet jack battery be charged for without causing damage? L-220-DC-HD

Answer

Run time depends on the load being lifted but approximately 3-6 hours intermittently. Battery charger will turn off and on automatically as to avoid over charging.

View Related Product: L-220-DC-HD FID: 238

What is the rust inhibitor made of? PAIL-STL-RI

Answer

This product uses a clear epoxy rust inhibitor.

View Related Product: PAIL-STL-RI FID: 915

What is the safety factor for the AIR-1500-D cart? AIR-1500-D

Answer

125% of the rated load (1:1.25).

View Related Product: AIR-1500-D FID: 301

What is the safety factor for the EHN-20-C? EHN-20-C

Answer

The safety factor is 1:1.25

View Related Product: EHN-20-C FID: 584

What is the safety factor for this crane? CBFC-2000

Answer

The safety factor for the CBFC-2000 is 3:1.

View Related Product: CBFC-2000 FID: 587

What is the scale accuracy for EPT-2748-45-SCL? EPT-2748-45-SCL

Answer

The scale accuracy is 0.1% of applied load.

View Related Product: EPT-2748-45-SCL FID: 343

What is the service range of the ball hitches? E-TUG-ABMHE-TUG-SABH

Answer

The service range of the E-TUG-SABH is 14-15/16 to 23-5/8.
The service range of the E-TUG-ABMH is 15-1/2 to 21-1/2.

View Related Product: E-TUG-ABMH FID: 1019

What is the service range on our CART-400-LP? CART-400-LP

Answer

The service range of CART-400-LP is 3-1/2 to 24 inches.

View Related Product: CART-400-LP FID: 289

What is the size of opening of the hook? LM-HP4-S

Answer

The hook opening measurers 7/8".

View Related Product: LM-HP4-S FID: 478

What is the size of the casters? OCTO-55

Answer

Wheel diameter is 4" x 1-1/4" and the stem is 1/2" and 2" long.

View Related Product: OCTO-55 FID: 881

What is the size of the clevis hook at the top of the DCT-75 and DCT-85? DCT-75DCT-85

Answer

The usable opening on the clevis hook is 1-1/4 inches.

View Related Product: DCT-75 FID: 769

What is the size of the fork pockets? DGS-A-PSD

Answer

The size of the fork pockets is 20-1/2" center to center.

View Related Product: DGS-A-PSD FID: 781

What is the size of the hole for the EB-1? EB-1

Answer

The hole in the EB-1 is 5/8" x 1/4"

View Related Product: EB-1 FID: 966

What is the size of the nose plate? PDSC-350-62

Answer

The nose plate of the PDSC-350-62 is 11" x 17".

View Related Product: PDSC-350-62 FID: 1627

What is the size of the tubing of series CYL-FMSR? CYL-FMSR-1 CYL-FMSR-3

Answer

The size is 1-1/2" x 1-1/2" 14 gauge steel tube.

View Related Product: CYL-FMSR-1 CYL-FMSR-3 FID: 1418

What is the spacing between the holes on the top plate? FJB-150

Answer

The holes are 2-1/4" and 4-3/4" apart with a diameter of 1/2".

View Related Product: FJB-150 FID: 1062

What is the spacing in between the mounting holes? SBA-48

Answer

The spacing in between the mounting holes is 21-1/4".

View Related Product: SBA-48 FID: 109

What is the spacing of the mesh backing on the PMC-VHPS-2000-AA? PMC-VHPS-2000-AA

Answer

The spacing of the mesh backing is 3/8"H x 3-3/8"W.

View Related Product: PMC-VHPS-2000-AA FID: 1460

What is the speed of this unit? E-TUG-30

Answer

Factory speed is set at 2.8MPH unloaded and 2.2MPH loaded.

View Related Product: E-TUG-30 FID: 1019

What is the speed of travel for this pallet truck? PMC-EPT-2045PMC-EPT-2745

Answer

The electric pallet truck travels 2.7 mph without load and 1.8 mph with load.

View Related Product: PMC-EPT-2045 FID: 339