Speed Bumps
Help control drivers in dangerous, areas while protecting people and property. One person installation. Can be removed for seal coating, snow removal, or change of location. Resists marring by oil, road salt, sunlight, and chemicals. Feature dual 1"W x 3/4"H cable channels and includes hardware. Constructed of lightweight recycled plastic. Compression strength is 3,200 pounds per square inch. The concrete hardware kit includes bolts, anchors, and washers. Asphalt kit includes spikes and butyl tape. The HD asphalt kit includes anchors and bolts. The HD anchor should be epoxied (epoxy not included) into the ground and then the speed bump is secured to that anchor with a bolt. The glue down anchor plate kit includes anchor plates, T-nuts, bolts, and washers. Requires 2-3 ounces of either 2-part epoxy or heavy duty construction adhesive to the bottom of each anchor plate, which is not included.
Spiked (Anti-Backup) Speed Bump
Traffic Cones
Clearance Bars
Traffic Cone BarrierAdditional Models In This Family
SBA-108
SBA-36
SB-108-GDK
SB-48-AK
SB-48-AK
SBD-72
SB-108
SBD-72
SB-108
SBDA-72
SBE-12
SB-48-GDK
SBHA-108
SBG-108
SB-108-AK
All measurements are approximate. Slight variations, tolerances or changes may occur at any time. Weights shown are approximate shipping weights.
The Search Box below is within the Model Chart for this Product Family (on this current page). Not an entire site search.
| Model # | Description | Attributes | Net Wt. (lbs) |
||||
|---|---|---|---|---|---|---|---|
| SB-36 |  | 30 Days Limited Warranty | Plastic Speed Bump Concrete Hardware 72 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 4 | 26 | ||
| SB-48 |  | 30 Days Limited Warranty | Plastic Speed Bump Concrete Hardware 48 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 3 | 17 | ||
| SB-108 | | 30 Days Limited Warranty | Plastic Speed Bump Concrete Hardware 106 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 5 | 58 | ||
| SBA-36 |  | 30 Days Limited Warranty | Plastic Speed Bump Asphalt Hardware 72 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 4 | 32 | ||
| SBA-48 |  | 30 Days Limited Warranty | Plastic Speed Bump Asphalt Hardware 48 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 3 | 42 | ||
| SBA-108 |  | 30 Days Limited Warranty | Plastic Speed Bump Asphalt Hardware 106 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 5 | 54 | ||
| SBD-48 |  | 30 Days Limited Warranty | Plastic Speed Bump Concrete Hardware 48 In. x 12 In. x 2-1/4 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 3 | 29 | ||
| SBD-72 | | 30 Days Limited Warranty | Plastic Speed Bump Concrete Hardware 72 In. x 12 In. x 2-1/4 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 4 | 40 | ||
| SBDA-48 |  | 30 Days Limited Warranty | Plastic Speed Bump Asphalt Hardware 48 In. x 12 In. x 2-1/4 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 3 | 33 | ||
| SBDA-72 |  | 30 Days Limited Warranty | Plastic Speed Bump Asphalt Hardware 72 In. x 12 In. x 2-1/4 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 4 | 45 | ||
| SBDG-48 |  | 30 Days Limited Warranty | Plastic Speed Bump Glue Down Hardware 48 In. x 12 In. x 2-1/4 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 3 | 26 | ||
| SBDG-72 |  | 30 Days Limited Warranty | Plastic Speed Bump Glue Down Hardware 72 In. x 12 In. x 2-1/4 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 4 | 40 | ||
| SBG-36 |  | 30 Days Limited Warranty | Plastic Speed Bump Glue Down Hardware 72 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 4 | 17 | ||
| SBG-48 |  | 30 Days Limited Warranty | Plastic Speed Bump Glue Down Hardware 48 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 3 | 19 | ||
| SBG-108 | | 30 Days Limited Warranty | Plastic Speed Bump Glue Down Hardware 106 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 5 | 68 | ||
| SBDHA-48 |  | 30 Days Limited Warranty | Plastic Heavy Duty Speed Bump Asphalt Hardware 48 In. x 12 In. x 2-1/4 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 3 | 29 | ||
| SBDHA-72 |  | 30 Days Limited Warranty | Plastic Heavy Duty Speed Bump Asphalt Hardware 72 In. x 12 In. x 2-1/4 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 4 | 43 | ||
| SBHA-108 | | 30 Days Limited Warranty | Plastic Speed Bump Heavy Duty Asphalt Hardware 106 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 5 | 45 | ||
| SBHA-36 |  | 30 Days Limited Warranty | Plastic Speed Bump Heavy Duty Asphalt Hardware 72 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 4 | 28 | ||
| SBHA-48 |  | 30 Days Limited Warranty | Plastic Speed Bump Heavy Duty Asphalt Hardware 48 In. x 10 In. x 2 In. Yellow | Compression Strength Per Square Inch (lb.): 3200 Number of Mounting Holes: 3 | 19 |
KEY: = Expand Model Details = Quickship item = Non-Returnable item = Approval Drawing Required = Non-Cancelable Item
= On Hold/Temporarily Unavailable = Approval Drawing = Testing Certificate = BABAA Compliant = 360 Image Warranty
= Works w/ Skid Only = Flatbed Truck Required
If you did not find an expected Model or SKU # in the table, try the Options Section Below
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 5
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 4
Unit:
Size: W x L x H
Weight:
Limited Warranty
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
Compression Strength Per Square Inch (lb.): 3200
Number of Mounting Holes: 3
For More Details of the Option Click the Red Model Button
| SB-108-AK |  | 30 Days Limited Warranty | Plastic Speed Bump with 5 Holes Asphalt Hardware Kit 13 In. x 7 In. x 6 In. Silver | Tape Width (in.): 2 Tape Length (ft.): 18 | 5 | |
| SB-108-GDK |  | 30 Days Limited Warranty | Plastic Speed Bump with 5 Holes Glue Down Hardware Kit 9 In. x 5 In. x 4 In. Silver | Steel Plates Quantity/Length x Width (in.): (5) 5 x 5 3/8 In. T-Nuts Quantity: 5 | 3 | |
| SB-36-AK |  | 30 Days Limited Warranty | Plastic Speed Bump with 4 Holes Asphalt Hardware Kit 13 In. x 7 In. x 6 In. Silver | Tape Width (in.): 2 Tape Length (ft.): 12 | 4 | |
| SB-36-GDK |  | 30 Days Limited Warranty | Plastic Speed Bump with 4 Holes Glue Down Hardware Kit 9 In. x 5 In. x 4 In. Silver | Steel Plates Quantity/Length x Width (in.): (4) 5 x 5 3/8 In. T-Nuts Quantity: 4 | 3 | |
| SB-48-AK | | 30 Days Limited Warranty | Plastic Speed Bump with 3 Holes Asphalt Hardware Kit 13 In. x 7 In. x 6 In. Silver | Tape Width (in.): 2 Tape Length (ft.): 8 | 4 | |
| SB-48-GDK |  | 30 Days Limited Warranty | Plastic Speed Bump with 3 Holes Glue Down Hardware Kit 9 In. x 5 In. x 4 In. Silver | Steel Plates Quantity/Length x Width (in.): (3) 5 x 5 3/8 In. T-Nuts Quantity: 3 | 2 | |
| SB-HD-AK-4 |  | 30 Days Limited Warranty | Steel Heavy Duty Asphalt Anchor Kit Silver | Anchor (qty.): 4 | 9 | |
| SBE-12 |  | 30 Days Limited Warranty | Plastic End Caps for Standard Speed Bumps 12 In. x 10 In. x 2 In. Yellow | Package Contents: Pair of end caps for standard speed bumps ASTM Specifications: | 9 | |
| SBS-1012 |  | 30 Days Limited Warranty | Aluminum Reflective Speed Bump Sign 1/8 In. x 11-3/4 In. x 9-3/4 In. White | Message Category: Security Placement Style: Wall Mountable | 2 |
.
If you did not find an expected Model or SKU # in this table, try the Product Specifications Section Above
Speed Bumps PDF's will open in a new window when clicked.
Manuals
Survey Sheets
No Survey Sheets For This Product
Approval Drawings
Testing Certificates
SDS Sheets
No SDS Sheets For This Product
Other PDF's
No "Other PDFs" For This Product...
Directory Links Of Available PDF's For All Products
Q: What is the spacing in between the mounting holes?
A: The spacing in between the mounting holes is 21-1/4".
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Speed Bumps |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Options. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Our Customer Service Associates Are Here To Assist You! |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||