Page 186 - Vestil Catalog 112

192 Fork Extensions
FORK TRUCK ATTACHMENTS steel construction with cast steel tips. Steel retaining strap (loop style) prevents fork

Provide the extra support needed to lift long or large objects with a fork truck. Welded
extensions from sliding off forks during use. Baked-in powder-coated toughness. OSHA
regulations require that extensions are no more than 150% of the existing fork length. (e.g.
48" existing forks, the fork extension should not exceed 72"). Maximum uniform capacity
is 4,000 pounds evenly distributed per pair.
Loop Style: Insert loop at the tip of the fork and slide it up at a 45° angle. Then, lay it
down over the existing fork.
Pin Style (suffix P): Remove pin and lay extension over fork or drive fork truck into the
extension. Re-insert the pin behind the heel of the fork to secure extension.

MODEL
WEIGHT
INSIDE WIDTH
THICKNESS
LENGTH
FORK WIDTH
NUMBER
LOOP STYLE ACCOMMODATES FORK EXTENSION USABLE MAXIMUM FORK PAIR (LB.)
FE-4-48� 4" 4½" 48" 2" 74
FE-4-54� 4" 4½" 54" 2" 84
FE-4-63� 4" 4½" 63" 2" 98
FE-4-66 4" 4½" 66" 2" 100
FE-4-72� 4" 4½" 72" 2" 114
FE-4-84� 4" 4½" 84" 2" 145
FE-4-90 4" 4½" 90" 2" 166
FE-4-96� 4" 4½" 96" 2" 172
STANDARD LOOP STYLE FE-5-48 5" 5½" 48" 2" 86
FE-5-54 5" 5½" 54" 2" 96
FE-5-63� 5" 5½" 63" 2" 110
FE-5-66 5" 5½" 66" 2" 116
FE-5-72� 5" 5½" 72" 2" 128
FE-5-84� 5" 5½" 84" 2" 160
FE-5-90 5" 5½" 90" 2" 179
FE-5-96� 5" 5½" 96" 2" 191
FE-6-48 6" 6½" 48" 2½" 94
FE-6-54� 6" 6½" 54" 2½" 104
HOT DIPPED GALVANIZED FINISH FE-6-63 6" 6½" 63" 2½" 116
SHOWN. OTHER SPECIALTY FINISHES FE-6-66 6" 6½" 66" 2½" 128
AVAILABLE, CONTACT FACTORY.
FE-6-72� 6" 6½" 72" 2½" 134
FE-6-84� 6" 6½" 84" 2½" 190
FE-6-90 6" 6½" 90" 2½" 204
New FE-6-96� 6" 6½" 96" 2½" 218
PIN STYLE
FE-4-48-P 4" 4½" 48" 2" 75
FE-4-54-P 4" 4½" 54" 2" 85
FE-4-63-P 4" 4½" 63" 2" 99
FE-4-66-P 4" 4½" 66" 2" 101
FE-4-72-P 4" 4½" 72" 2" 115
FE-4-84-P 4" 4½" 84" 2" 155
PIN STYLE • Suffix P
FE-4-90-P 4" 4½" 90" 2" 167
FE-4-96-P 4" 4½" 96" 2" 173
FE-4-108-P 4" 4½" 108" 2" 193
FE-4-120-P 4" 4½" 120" 2" 220
FE-5-48-P 5" 5½" 48" 2" 87
FE-5-54-P 5" 5½" 54" 2" 97
FE-5-63-P 5" 5½" 63" 2" 111
FE-5-66-P 5" 5½" 66" 2" 117
FE-5-72-P 5" 5½" 72" 2" 129
FE-5-84-P 5" 5½" 84" 2" 161
REAR SPACER • Suffix RS FE-5-90-P 5" 5½" 90" 2" 180
FE-5-96-P 5" 5½" 96" 2" 192
Rear Spacer (suffix RS): Load FE-5-108-P 5" 5½" 108" 2" 216
pallets into rear of trailer FE-5-120-P 5" 5½" 120" 2" 230
conveniently and easily. Practical FE-6-48-P 6" 6½" 48" 2½" 95
for pushing pallets two or three FE-6-54-P 6" 6½" 54" 2½" 105
deep into a trailer. This option FE-6-63-P 6" 6½" 63" 2½" 117
is factory installed and must be FE-6-66-P 6" 6½" 66" 2½" 129
ordered with fork extensions. FE-6-72-P 6" 6½" 72" 2½" 135
Contact factory for pricing. FE-6-84-P 6" 6½" 84" 2½" 187
FE-6-90-P 6" 6½" 90" 2½" 190
FE-6-96-P 6" 6½" 96" 2½" 214
FE-6-108-P 6" 6½" 108" 2½" 216
FE-6-120-P 6" 6½" 120" 2½" 230